From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Fri, 2 Mar 2012 11:37:23 +0100 Subject: [U-Boot] [PATCH] Armada100: gplugD: Add FAT & EXT2 command support In-Reply-To: References: <1329139838-32146-1-git-send-email-ajay.bhargav@einfochips.com> Message-ID: <201203021137.23865.marex@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > > -----Original Message----- > > From: Ajay Bhargav [mailto:ajay.bhargav at einfochips.com] > > Sent: 13 February 2012 19:01 > > To: Prafulla Wadaskar > > Cc: marek.vasut at gmail.com; u-boot at lists.denx.de; Ajay Bhargav > > Subject: [PATCH] Armada100: gplugD: Add FAT & EXT2 command support > > > > This patch adds FAT and ext2 command support for marvell gplugD > > > > Signed-off-by: Ajay Bhargav > > --- > > > > include/configs/gplugd.h | 2 ++ > > 1 files changed, 2 insertions(+), 0 deletions(-) > > > > diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h > > index 061ebe6..462cc7e 100644 > > --- a/include/configs/gplugd.h > > +++ b/include/configs/gplugd.h > > @@ -73,6 +73,8 @@ > > > > #define CONFIG_CMD_AUTOSCRIPT > > #undef CONFIG_CMD_FPGA > > #define CONFIG_CMD_USB > > > > +#define CONFIG_CMD_EXT2 > > +#define CONFIG_CMD_FAT > > > > /* Disable DCACHE */ > > #define CONFIG_SYS_DCACHE_OFF > > > > -- > > 1.7.7.2 > > Applied to u-boot-marvell.git next branch > > Regards.. > Prafulla . . . Ok, dropping them as I see you picked them all. Thanks for picking them up, Prafulla. M