From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Mon, 5 Mar 2012 21:15:16 +0100
Subject: [U-Boot] U-Boot/IXP
In-Reply-To: <4F55152A.8080003@discworld.dascon.de>
References: <201203050214.56568.marex@denx.de>
	<201203051254.17795.marex@denx.de>
	<4F55152A.8080003@discworld.dascon.de>
Message-ID: <201203052115.16547.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Michael Schwingen,

> Am 03/05/2012 12:54 PM, schrieb Marek Vasut:
> > Dear Michael Schwingen,
> > 
> >> On Mon, Mar 05, 2012 at 02:14:56AM +0100, Marek Vasut wrote:
> >>> Dear Michael Schwingen,
> >>> 
> >>> do you still intend to maintain IXP support in uboot or can all those
> >>> IXP boards be removed? I'd be great if you helped bringing them back
> >>> in-line!
> >> 
> >> I still use them and would want to keep these boards (and maintain
> >> them).
> >> 
> >> I only glimpse at the mailing list from time to time - are there any
> >> open problems with these boards that need to be addressed?
> > 
> > No, I just cannot compile it with usual arm-linux-gnueabi- toolchain and
> > that puts a bleep on my bug-radar. Is that normal? Do I need a special
> > toolchain?
> 
> I am using an old, locally built toolchain that identifies itself as
> gcc version 4.3.4 (crosstool-NG-hg_default at 1471_4a88cb9bfe8f)
> 
> I can take a look at this using a newer toolchain - however, I am in the
> process of moving, so this will probably take some weeks.
> 
> What prebuilt toolchain should I try?

I was more curious if it's possible for me myself to build these. And if so, can 
that be done with usual arm-linux-gnueabi- toolchain? Or do I need special armeb 
toolchain compiled in some special way?

> 
> cu
> Michael

Best regards,
Marek Vasut