[U-Boot] [PATCH] USB: ehci-mx6: Add proper IO accessors

[Marek Vasut <marex@denx.de>]

Dear Stefano Babic,

> On 19/03/2012 23:36, Fabio Estevam wrote:
> > Add proper IO accessors for mx6 usb registers.
> > 
> > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> > ---
> > This patch depends on "[PATCH v5] mx6: Read silicon revision from
> > register"
> > 
> >  drivers/usb/host/ehci-mx6.c |   13 ++++---------
> >  1 files changed, 4 insertions(+), 9 deletions(-)
> > 
> > diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
> > index b7bf49d..5dec673 100644
> > --- a/drivers/usb/host/ehci-mx6.c
> > +++ b/drivers/usb/host/ehci-mx6.c
> > @@ -46,13 +46,9 @@
> > 
> >  #define USBPHY_CTRL_ENUTMILEVEL3		0x00008000
> >  #define USBPHY_CTRL_ENUTMILEVEL2		0x00004000
> > 
> > -#define ANADIG_USB2_CHRG_DETECT			0x00000210
> > 
> >  #define ANADIG_USB2_CHRG_DETECT_EN_B		0x00100000
> >  #define ANADIG_USB2_CHRG_DETECT_CHK_CHRG_B	0x00080000
> > 
> > -#define ANADIG_USB2_PLL_480_CTRL		0x00000020
> > -#define ANADIG_USB2_PLL_480_CTRL_SET		0x00000024
> > -#define ANADIG_USB2_PLL_480_CTRL_CLR		0x00000028
> > 
> >  #define ANADIG_USB2_PLL_480_CTRL_BYPASS		0x00010000
> >  #define ANADIG_USB2_PLL_480_CTRL_ENABLE		0x00002000
> >  #define ANADIG_USB2_PLL_480_CTRL_POWER		0x00001000
> > 
> > @@ -77,8 +73,7 @@ static void usbh1_internal_phy_clock_gate(int on)
> > 
> >  static void usbh1_power_config(void)
> >  {
> > 
> > -	void __iomem *anatop_base = (void __iomem *)ANATOP_BASE_ADDR;
> > -
> > +	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
> > 
> >  	/*
> >  	
> >  	 * Some phy and power's special controls for host1
> >  	 * 1. The external charger detector needs to be disabled
> > 
> > @@ -89,15 +84,15 @@ static void usbh1_power_config(void)
> > 
> >  	 */
> >  	
> >  	__raw_writel(ANADIG_USB2_CHRG_DETECT_EN_B |
> >  	
> >  		     ANADIG_USB2_CHRG_DETECT_CHK_CHRG_B,
> > 
> > -		     anatop_base + ANADIG_USB2_CHRG_DETECT);
> > +		     &anatop->usb2_chrg_detect);
> > 
> >  	__raw_writel(ANADIG_USB2_PLL_480_CTRL_BYPASS,
> > 
> > -		     anatop_base + ANADIG_USB2_PLL_480_CTRL_CLR);
> > +		     &anatop->usb2_pll_480_ctrl);
> > 
> >  	__raw_writel(ANADIG_USB2_PLL_480_CTRL_ENABLE |
> >  	
> >  		     ANADIG_USB2_PLL_480_CTRL_POWER |
> >  		     ANADIG_USB2_PLL_480_CTRL_EN_USB_CLKS,
> > 
> > -		     anatop_base + ANADIG_USB2_PLL_480_CTRL_SET);
> > +		     &anatop->usb2_pll_480_ctrl_set);
> > 
> >  }
> >  
> >  static int usbh1_phy_enable(void)
> 
> Acked-by: Stefano Babic <sbabic@denx.de>
> 
Agreed

Acked-by: Marek Vasut <marex@denx.de>

Best regards,
Marek Vasut