From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RESEND] ca9x4_ct_vxp build error
Date: Tue, 20 Mar 2012 22:11:08 +0100 [thread overview]
Message-ID: <201203202211.08661.marex@denx.de> (raw)
As my previous remark about this board not building was ignored, I'm resending
it one more time. I'll do one more resend of this note and if noone fixes this
I'll submit a removal patch.
$ CROSS_COMPILE=arm-linux-gnueabi- ARCH=arm ./MAKEALL ca9x4_ct_vxp
Configuring for ca9x4_ct_vxp board...
common/libcommon.o: In function `cread_line':
/home/marex/U-Boot/u-boot-marex/common/main.c:695: undefined reference to
`get_ticks'
/home/marex/U-Boot/u-boot-marex/common/main.c:695: undefined reference to
`get_tbclk'
/home/marex/U-Boot/u-boot-marex/common/main.c:698: undefined reference to
`get_ticks'
arm-linux-gnueabi-ld: BFD (GNU Binutils for Debian) 2.22 assertion fail
../../bfd/elf32-arm.c:7498
arm-linux-gnueabi-ld: BFD (GNU Binutils for Debian) 2.22 assertion fail
../../bfd/elf32-arm.c:7498
arm-linux-gnueabi-ld: BFD (GNU Binutils for Debian) 2.22 assertion fail
../../bfd/elf32-arm.c:13830
/bin/sh: line 1: 11250 Segmentation fault arm-linux-gnueabi-ld -pie -T u-
boot.lds -Bstatic -Ttext 0x60800000 $UNDEF_SYM arch/arm/cpu/armv7/start.o --
start-group api/libapi.o arch/arm/cpu/armv7/libarmv7.o arch/arm/lib/libarm.o
common/libcommon.o disk/libdisk.o drivers/bios_emulator/libatibiosemu.o
drivers/block/libblock.o drivers/dma/libdma.o drivers/fpga/libfpga.o
drivers/gpio/libgpio.o drivers/hwmon/libhwmon.o drivers/i2c/libi2c.o
drivers/input/libinput.o drivers/misc/libmisc.o drivers/mmc/libmmc.o
drivers/mtd/libmtd.o drivers/mtd/nand/libnand.o drivers/mtd/onenand/libonenand.o
drivers/mtd/spi/libspi_flash.o drivers/mtd/ubi/libubi.o drivers/net/libnet.o
drivers/net/phy/libphy.o drivers/pci/libpci.o drivers/pcmcia/libpcmcia.o
drivers/power/libpower.o drivers/rtc/librtc.o drivers/serial/libserial.o
drivers/spi/libspi.o drivers/twserial/libtws.o drivers/usb/eth/libusb_eth.o
drivers/usb/gadget/libusb_gadget.o drivers/usb/host/libusb_host.o
drivers/usb/musb/libusb_musb.o drivers/usb/phy/libusb_phy.o
drivers/usb/ulpi/libusb_ulpi.o drivers/video/libvideo.o
drivers/watchdog/libwatchdog.o fs/cramfs/libcramfs.o fs/ext2/libext2fs.o
fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o fs/reiserfs/libreiserfs.o
fs/ubifs/libubifs.o fs/yaffs2/libyaffs2.o lib/libfdt/libfdt.o lib/libgeneric.o
lib/lzma/liblzma.o lib/lzo/liblzo.o lib/zlib/libz.o net/libnet.o post/libpost.o
board/armltd/vexpress/libvexpress.o --end-group /home/marex/U-Boot/u-boot-
marex/arch/arm/lib/eabi_compat.o -L /usr/lib/gcc/arm-linux-gnueabi/4.4.6 -lgcc -
Map u-boot.map -o u-boot
make: *** [u-boot] Error 139
arm-linux-gnueabi-size: ./u-boot: File format not recognized
--------------------- SUMMARY ----------------------------
Boards compiled: 1
Boards with warnings or errors: 1 ( ca9x4_ct_vxp )
----------------------------------------------------------
next reply other threads:[~2012-03-20 21:11 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-20 21:11 Marek Vasut [this message]
2012-03-21 17:22 ` [U-Boot] [RESEND] ca9x4_ct_vxp build error Matt Waddel
2012-03-21 19:24 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201203202211.08661.marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox