[U-Boot] [PATCH] BOOT: Add RAW ramdisk support to bootz

[Marek Vasut <marek.vasut@gmail.com>]

Dear Rob Herring,

> From: Marek Vasut <marek.vasut@gmail.com>
> 
> This patch allows loading RAW ramdisk via bootz command. The raw ramdisk is
> loaded only in case it's size is specified:
> 
>   bootz <kernel addr> <ramdisk addr>:<ramdisk size> <fdt addr>
> 
> For example:
> 
>   bootz 0x42000000 0x43000000:0x12345 0x44000000
> 
> Signed-off-by: Marek Vasut <marex@denx.de>
> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
> Cc: Tom Warren <TWarren@nvidia.com>
> Cc: albert.u.boot at aribaud.net
> Cc: afleming at gmail.com
> Cc: Simon Glass <sjg@chromium.org>
> Cc: Stephen Warren <swarren@nvidia.com>
> Cc: Nicolas Pitre <nico@fluxnic.net>
> Cc: Wolfgang Denk <wd@denx.de>
> Cc: Detlev Zundel <dzu@denx.de>

Doesn't this still colide with CONFIG_FIT? Aka. in case of CONFIG_FIT enabled, 
you can't use raw ramdisk?

btw. maybe we should use "@" instead of ":" and be done with it?

> ---
> V3:
> - fix operation when CONFIG_FIT is enabled as FIT images use
>   <addr>[:<subimage>]
> 
>  README             |    5 +++++
>  common/cmd_bootm.c |    6 ++++--
>  common/image.c     |   15 ++++++++++++---
>  3 files changed, 21 insertions(+), 5 deletions(-)
> 
> diff --git a/README b/README
> index 5141751..068ec71 100644
> --- a/README
> +++ b/README
> @@ -4330,6 +4330,11 @@ On some platforms, it's possible to boot Linux
> zImage. This is done using the "bootz" command. The syntax of "bootz"
> command is the same as the syntax of "bootm" command.
> 
> +Note, defining the CONFIG_SUPPORT_INITRD_RAW allows user to supply
> +kernel with raw initrd images. The syntax is slightly different, the
> +address of the initrd must be augmented by it's size, in the following
> +format: "<initrd addres>:<initrd size>".
> +
> 
>  Standalone HOWTO:
>  =================
> diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
> index b49d4f7..2f9b214 100644
> --- a/common/cmd_bootm.c
> +++ b/common/cmd_bootm.c
> @@ -1634,9 +1634,11 @@ static int do_bootz(cmd_tbl_t *cmdtp, int flag, int
> argc, char * const argv[]) U_BOOT_CMD(
>  	bootz,	CONFIG_SYS_MAXARGS,	1,	do_bootz,
>  	"boot Linux zImage image from memory",
> -	"[addr [initrd] [fdt]]\n    - boot Linux zImage stored in memory\n"
> +	"[addr [initrd[:size]] [fdt]]\n"
> +	"    - boot Linux zImage stored in memory\n"
>  	"\tThe argument 'initrd' is optional and specifies the address\n"
> -	"\tof the initrd in memory.\n"
> +	"\tof the initrd in memory. The optional argument ':size' allows\n"
> +	"\tspecifying the size of RAW initrd.\n"
>  #if defined(CONFIG_OF_LIBFDT)
>  	"\tWhen booting a Linux kernel which requires a flat device-tree\n"
>  	"\ta third argument is required which is the address of the\n"
> diff --git a/common/image.c b/common/image.c
> index 77ca6e4..2a25f5f 100644
> --- a/common/image.c
> +++ b/common/image.c
> @@ -796,6 +796,7 @@ int boot_get_ramdisk(int argc, char * const argv[],
> bootm_headers_t *images, ulong rd_addr, rd_load;
>  	ulong rd_data, rd_len;
>  	const image_header_t *rd_hdr;
> +	char *end;
>  #if defined(CONFIG_FIT)
>  	void		*fit_hdr;
>  	const char	*fit_uname_config = NULL;
> @@ -989,9 +990,17 @@ int boot_get_ramdisk(int argc, char * const argv[],
> bootm_headers_t *images, break;
>  #endif
>  		default:
> -			puts("Wrong Ramdisk Image Format\n");
> -			rd_data = rd_len = rd_load = 0;
> -			return 1;
> +#ifdef CONFIG_SUPPORT_RAW_INITRD
> +			if (argc >= 3 && (end = strchr(argv[2], ':'))) {
> +				rd_len = simple_strtoul(++end, NULL, 16);
> +				rd_data = rd_addr;
> +			} else
> +#endif
> +			{
> +				puts("Wrong Ramdisk Image Format\n");
> +				rd_data = rd_len = rd_load = 0;
> +				return 1;
> +			}
>  		}
>  	} else if (images->legacy_hdr_valid &&
>  			image_check_type(&images->legacy_hdr_os_copy,

Best regards,
Marek Vasut