[U-Boot] [PATCH 1/2] mx28: Split the README into a common part and a m28 specific part

[Marek Vasut <marex@denx.de>]

Dear Fabio Estevam,

> Split the README into a common part and a m28 specific part.
> 
> This will make things easier when adding new README files for other mx28
> based boards.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
>  doc/README.m28         |  217
> +--------------------------------------------- doc/README.mx28_common | 
> 226 ++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 229
> insertions(+), 214 deletions(-)
>  create mode 100644 doc/README.mx28_common
> 
> diff --git a/doc/README.m28 b/doc/README.m28
> index 548982f..9622a55 100644
> --- a/doc/README.m28
> +++ b/doc/README.m28
> @@ -1,28 +1,7 @@
>  DENX M28EVK
>  ===========
> 
> -This document describes the DENX M28/M28EVK U-Boot port. This document
> mostly -covers topics related to making the module/board bootable.
> -
> -Terminology
> ------------
> -
> -The dollar symbol ($) introduces a snipped of shell code. This shall be
> typed -into the unix command prompt in U-Boot source code root directory.
> -
> -The (=>) introduces a snipped of code that should by typed into U-Boot
> command -prompt.
> -
> -Contents
> ---------
> -
> -0) Files of the M28/M28EVK port
> -1) Prerequisites
> -2) Compiling U-Boot for M28
> -3) Installation of U-Boot for M28EVK to SD card
> -4) Installation of U-Boot for M28 to NAND flash
> -
> -0) Files of the M28/M28EVK port
> +Files of the M28/M28EVK port
>  -------------------------------

Fix the length of underlining here ;-)

Otherwise, fine by me, will ACK V2.