[U-Boot] U-Boot build report @ Sat Mar 31 05:30:15 CEST 2012

Marek Vasut
2012-03-31T15:53:18Z

Dear Simon Glass,

> Hi,
>
> On Mar 31, 2012 7:13 AM, "Marek Vasut" <marex@denx.de> wrote:
> > Dear Anatolij Gustschin,
> >
> > > On Sat, 31 Mar 2012 15:43:03 +0200
> > > Anatolij Gustschin <agust@denx.de> wrote:
> > > ...
> > >
> > > > > arm/seaboard FAILED FOR: eldk4.2 eldk5.1
> > > > > arm/ventana FAILED FOR: eldk4.2 eldk5.1
> > > >
> > > > These boards actually build without errors and warnings, but
> > > > errors/warnings status is reported by MAKEALL because of the output:
> > > >
> > > > DTC: dts->dtb on file "dt.dtb.tmp"
> > > >
> > > > This could be fixed by
> > > >
> > > > diff --git a/dts/Makefile b/dts/Makefile
> > > > index 5792afd..d19a622 100644
> > > > --- a/dts/Makefile
> > > > +++ b/dts/Makefile
> > > > @@ -47,7 +47,7 @@ DT_BIN := $(obj)dt.dtb
> > > >
> > > > $(DT_BIN): $(TOPDIR)/board/$(VENDOR)/dts/$(DEVICE_TREE).dts
> > > >
> > > > cat $< | $(CPP) -P $(DTS_CPPFLAGS) - >$@.tmp
> > > >
> > > > - $(DTC) -R 4 -p 0x1000 -O dtb -o ${DT_BIN} $@.tmp
> > > > + $(DTC) -R 4 -p 0x1000 -O dtb -o ${DT_BIN} $@.tmp 2> /dev/null
> > > >
> > > > rm $@.tmp
> > > >
> > > > process_lds = \
> > >
> > > Thinking more about this I see that it is wrong. dtc could die
> > > for other reasons and it should be handled as error.
> > > We should fix dtc instead not to output this info to stderr.
> > > Currently it does:
> > >
> > > fprintf(stderr, "DTC: %s->%s on file \"%s\"\n",
> > >
> > > inform, outform, arg);
> >
> > Agreed! Doing stderr output of info text is plain wrong :( Will you send
>
> a patch
>
> > mainline please?
>
> I will do that if you like, it has bugged me for a while.

Thank you very much, I owe you :)

> Regards,
> Simon
>
> > > Thanks,
> > >
> > > Anatolij
> >
> > Best regards,
> > Marek Vasut

Best regards,
Marek Vasut