From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Sat, 31 Mar 2012 23:29:18 +0200
Subject: [U-Boot] [PATCH 10/14] CMD: Remove CMD_MEM and CMD_LOOPW,
	they're unused
In-Reply-To: <20120331225908.3af5779b@wker>
References: <1333216039-21507-1-git-send-email-marex@denx.de>
	<1333216039-21507-10-git-send-email-marex@denx.de>
	<20120331225908.3af5779b@wker>
Message-ID: <201203312329.18669.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Anatolij Gustschin,

> Hi Marek,
> 
> On Sat, 31 Mar 2012 19:47:15 +0200
> 
> Marek Vasut <marex@denx.de> wrote:
> > Signed-off-by: Marek Vasut <marex@denx.de>
> > ---
> > 
> >  README |    7 -------
> >  1 files changed, 0 insertions(+), 7 deletions(-)
> > 
> > diff --git a/README b/README
> > index c98afa7..0ebe877 100644
> > --- a/README
> > +++ b/README
> > 
> > @@ -3379,10 +3379,6 @@ Low Level (hardware related) configuration options:
> >  		and crc32 is the correct crc32 which the
> >  		area should have.
> > 
> > -- CONFIG_LOOPW
> > -		Add the "loopw" memory command. This only takes effect if
> > -		the memory commands are activated globally (CONFIG_CMD_MEM).
> 
> Please, no. CONFIG_LOOPW is used if CONFIG_CMD_MEMORY is defined. This
> text should be fixed instead: s/CONFIG_CMD_MEM/CONFIG_CMD_MEMORY/

DAMN, it's not CONFIG_CMD ... scrap this patch, good catch!
> 
> Also it probably makes sense to change CONFIG_LOOPW to CONFIG_CMD_LOOPW
> since this configures an U-Boot command.

Agreed!
> 
> Same for CONFIG_MX_CYCLIC.

Yes.
> 
> ...
> 
> > @@ -3394,9 +3390,6 @@ Low Level (hardware related) configuration options:
> >  		=> mwc.l 100 12345678 10
> >  		This command will write 12345678 to address 100 all 10 ms.
> > 
> > -		This only takes effect if the memory commands are activated
> > -		globally (CONFIG_CMD_MEM).
> > -
> 
> Same applies here.
> 
> Thanks,
> Anatolij

Best regards,
Marek Vasut