* [U-Boot] [PATCH][resubmit] eb_cpux9k2: add USB host support to board
@ 2012-04-01 15:29 Jens Scharsig
2012-04-01 16:14 ` Marek Vasut
2012-04-21 15:13 ` Wolfgang Denk
0 siblings, 2 replies; 8+ messages in thread
From: Jens Scharsig @ 2012-04-01 15:29 UTC (permalink / raw)
To: u-boot
* add USB host support to eb_cpux9k2 board
Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
---
include/configs/eb_cpux9k2.h | 14 ++++++++++++++
1 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
index 9046cf0..eb05e2a 100644
--- a/include/configs/eb_cpux9k2.h
+++ b/include/configs/eb_cpux9k2.h
@@ -139,6 +139,8 @@
#define CONFIG_CMD_PING
#define CONFIG_I2C_CMD_NO_FLAT
#define CONFIG_I2C_CMD_TREE
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_FAT
#define CONFIG_SYS_LONGHELP
@@ -169,6 +171,18 @@
/*
* Hardware drivers
*/
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_AT91C_PQFP_UHPBUG
+#define CONFIG_USB_STORAGE
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+#define CONFIG_EFI_PARTITION
+
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"
/*
* UART/CONSOLE
--
1.7.7
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH][resubmit] eb_cpux9k2: add USB host support to board
2012-04-01 15:29 [U-Boot] [PATCH][resubmit] eb_cpux9k2: add USB host support to board Jens Scharsig
@ 2012-04-01 16:14 ` Marek Vasut
2012-04-02 6:20 ` esw at bus-elektronik.de
2012-04-21 15:13 ` Wolfgang Denk
1 sibling, 1 reply; 8+ messages in thread
From: Marek Vasut @ 2012-04-01 16:14 UTC (permalink / raw)
To: u-boot
Dear Jens Scharsig,
> * add USB host support to eb_cpux9k2 board
Did you test this too?
CCing Albert, Albert do you want me to push this through staging or you'll pick
this?
> Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
> ---
> include/configs/eb_cpux9k2.h | 14 ++++++++++++++
> 1 files changed, 14 insertions(+), 0 deletions(-)
>
> diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
> index 9046cf0..eb05e2a 100644
> --- a/include/configs/eb_cpux9k2.h
> +++ b/include/configs/eb_cpux9k2.h
> @@ -139,6 +139,8 @@
> #define CONFIG_CMD_PING
> #define CONFIG_I2C_CMD_NO_FLAT
> #define CONFIG_I2C_CMD_TREE
> +#define CONFIG_CMD_USB
> +#define CONFIG_CMD_FAT
>
> #define CONFIG_SYS_LONGHELP
>
> @@ -169,6 +171,18 @@
> /*
> * Hardware drivers
> */
> +#define CONFIG_USB_ATMEL
> +#define CONFIG_USB_OHCI_NEW
> +#define CONFIG_AT91C_PQFP_UHPBUG
> +#define CONFIG_USB_STORAGE
> +#define CONFIG_DOS_PARTITION
> +#define CONFIG_ISO_PARTITION
> +#define CONFIG_EFI_PARTITION
> +
> +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
> +#define CONFIG_SYS_USB_OHCI_CPU_INIT
> +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000
> +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"
>
> /*
> * UART/CONSOLE
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH][resubmit] eb_cpux9k2: add USB host support to board
2012-04-01 16:14 ` Marek Vasut
@ 2012-04-02 6:20 ` esw at bus-elektronik.de
2012-04-02 13:57 ` Marek Vasut
0 siblings, 1 reply; 8+ messages in thread
From: esw at bus-elektronik.de @ 2012-04-02 6:20 UTC (permalink / raw)
To: u-boot
Am 2012-04-01 18:14, schrieb Marek Vasut:
> Dear Jens Scharsig,
>
>> * add USB host support to eb_cpux9k2 board
>
> Did you test this too?
Of course, I've test this with/against current RC1.
>
> CCing Albert, Albert do you want me to push this through staging or you'll pick
> this?
>
>> Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
>> ---
>> include/configs/eb_cpux9k2.h | 14 ++++++++++++++
>> 1 files changed, 14 insertions(+), 0 deletions(-)
>>
>> diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
>> index 9046cf0..eb05e2a 100644
>> --- a/include/configs/eb_cpux9k2.h
>> +++ b/include/configs/eb_cpux9k2.h
>> @@ -139,6 +139,8 @@
>> #define CONFIG_CMD_PING
>> #define CONFIG_I2C_CMD_NO_FLAT
>> #define CONFIG_I2C_CMD_TREE
>> +#define CONFIG_CMD_USB
>> +#define CONFIG_CMD_FAT
>>
>> #define CONFIG_SYS_LONGHELP
>>
>> @@ -169,6 +171,18 @@
>> /*
>> * Hardware drivers
>> */
>> +#define CONFIG_USB_ATMEL
>> +#define CONFIG_USB_OHCI_NEW
>> +#define CONFIG_AT91C_PQFP_UHPBUG
>> +#define CONFIG_USB_STORAGE
>> +#define CONFIG_DOS_PARTITION
>> +#define CONFIG_ISO_PARTITION
>> +#define CONFIG_EFI_PARTITION
>> +
>> +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
>> +#define CONFIG_SYS_USB_OHCI_CPU_INIT
>> +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000
>> +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"
>>
>> /*
>> * UART/CONSOLE
>
> Best regards,
> Marek Vasut
Tested-by: Jens Scharsig <js_at_ng@scharsoft.de>
Best regards
Jens Scharsig
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH][resubmit] eb_cpux9k2: add USB host support to board
2012-04-02 6:20 ` esw at bus-elektronik.de
@ 2012-04-02 13:57 ` Marek Vasut
2012-04-06 8:55 ` Jens Scharsig
0 siblings, 1 reply; 8+ messages in thread
From: Marek Vasut @ 2012-04-02 13:57 UTC (permalink / raw)
To: u-boot
Dear esw at bus-elektronik.de,
> Am 2012-04-01 18:14, schrieb Marek Vasut:
> > Dear Jens Scharsig,
> >
> >> * add USB host support to eb_cpux9k2 board
> >
> > Did you test this too?
>
> Of course, I've test this with/against current RC1.
Ok, I can pick this up and push through my staging ... or does Albert want to
pick it directly via -arm (which would be better)?
> > CCing Albert, Albert do you want me to push this through staging or
> > you'll pick this?
> >
> >> Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
> >> ---
> >>
> >> include/configs/eb_cpux9k2.h | 14 ++++++++++++++
> >> 1 files changed, 14 insertions(+), 0 deletions(-)
> >>
> >> diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
> >> index 9046cf0..eb05e2a 100644
> >> --- a/include/configs/eb_cpux9k2.h
> >> +++ b/include/configs/eb_cpux9k2.h
> >> @@ -139,6 +139,8 @@
> >>
> >> #define CONFIG_CMD_PING
> >> #define CONFIG_I2C_CMD_NO_FLAT
> >> #define CONFIG_I2C_CMD_TREE
> >>
> >> +#define CONFIG_CMD_USB
> >> +#define CONFIG_CMD_FAT
> >>
> >> #define CONFIG_SYS_LONGHELP
> >>
> >> @@ -169,6 +171,18 @@
> >>
> >> /*
> >>
> >> * Hardware drivers
> >> */
> >>
> >> +#define CONFIG_USB_ATMEL
> >> +#define CONFIG_USB_OHCI_NEW
> >> +#define CONFIG_AT91C_PQFP_UHPBUG
> >> +#define CONFIG_USB_STORAGE
> >> +#define CONFIG_DOS_PARTITION
> >> +#define CONFIG_ISO_PARTITION
> >> +#define CONFIG_EFI_PARTITION
> >> +
> >> +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
> >> +#define CONFIG_SYS_USB_OHCI_CPU_INIT
> >> +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000
> >> +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"
> >>
> >> /*
> >>
> >> * UART/CONSOLE
> >
> > Best regards,
> > Marek Vasut
>
> Tested-by: Jens Scharsig <js_at_ng@scharsoft.de>
>
>
> Best regards
>
> Jens Scharsig
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH][resubmit] eb_cpux9k2: add USB host support to board
2012-04-02 13:57 ` Marek Vasut
@ 2012-04-06 8:55 ` Jens Scharsig
2012-04-06 14:05 ` Marek Vasut
0 siblings, 1 reply; 8+ messages in thread
From: Jens Scharsig @ 2012-04-06 8:55 UTC (permalink / raw)
To: u-boot
Dear Marek Vasut,
> Dear esw at bus-elektronik.de,
>
>> Am 2012-04-01 18:14, schrieb Marek Vasut:
>>> Dear Jens Scharsig,
>>>
>>>> * add USB host support to eb_cpux9k2 board
>>>
>>> Did you test this too?
>>
>> Of course, I've test this with/against current RC1.
>
> Ok, I can pick this up and push through my staging ... or does Albert want to
> pick it directly via -arm (which would be better)?
I don't know which is better. You are the custodians.
Albert what is your opinion ?
>
>>> CCing Albert, Albert do you want me to push this through staging or
>>> you'll pick this?
>>>
>>>> Signed-off-by: Jens Scharsig<js_at_ng@scharsoft.de>
>>>> ---
>>>>
>>>> include/configs/eb_cpux9k2.h | 14 ++++++++++++++
>>>> 1 files changed, 14 insertions(+), 0 deletions(-)
>>>>
>>>> diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
>>>> index 9046cf0..eb05e2a 100644
>>>> --- a/include/configs/eb_cpux9k2.h
>>>> +++ b/include/configs/eb_cpux9k2.h
>>>> @@ -139,6 +139,8 @@
>>>>
>>>> #define CONFIG_CMD_PING
>>>> #define CONFIG_I2C_CMD_NO_FLAT
>>>> #define CONFIG_I2C_CMD_TREE
>>>>
>>>> +#define CONFIG_CMD_USB
>>>> +#define CONFIG_CMD_FAT
>>>>
>>>> #define CONFIG_SYS_LONGHELP
>>>>
>>>> @@ -169,6 +171,18 @@
>>>>
>>>> /*
>>>>
>>>> * Hardware drivers
>>>> */
>>>>
>>>> +#define CONFIG_USB_ATMEL
>>>> +#define CONFIG_USB_OHCI_NEW
>>>> +#define CONFIG_AT91C_PQFP_UHPBUG
>>>> +#define CONFIG_USB_STORAGE
>>>> +#define CONFIG_DOS_PARTITION
>>>> +#define CONFIG_ISO_PARTITION
>>>> +#define CONFIG_EFI_PARTITION
>>>> +
>>>> +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
>>>> +#define CONFIG_SYS_USB_OHCI_CPU_INIT
>>>> +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000
>>>> +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"
>>>>
>>>> /*
>>>>
>>>> * UART/CONSOLE
>>>
>>> Best regards,
>>> Marek Vasut
>>
>> Tested-by: Jens Scharsig<js_at_ng@scharsoft.de>
>>
>>
>> Best regards
>>
>> Jens Scharsig
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>
> Best regards,
> Marek Vasut
Best regards
Jens Scharsig
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH][resubmit] eb_cpux9k2: add USB host support to board
2012-04-06 8:55 ` Jens Scharsig
@ 2012-04-06 14:05 ` Marek Vasut
2012-04-07 10:05 ` Jens Scharsig
0 siblings, 1 reply; 8+ messages in thread
From: Marek Vasut @ 2012-04-06 14:05 UTC (permalink / raw)
To: u-boot
Dear Jens Scharsig,
> Dear Marek Vasut,
>
> > Dear esw at bus-elektronik.de,
> >
> >> Am 2012-04-01 18:14, schrieb Marek Vasut:
> >>> Dear Jens Scharsig,
> >>>
> >>>> * add USB host support to eb_cpux9k2 board
> >>>
> >>> Did you test this too?
> >>
> >> Of course, I've test this with/against current RC1.
> >
> > Ok, I can pick this up and push through my staging ... or does Albert
> > want to pick it directly via -arm (which would be better)?
>
> I don't know which is better. You are the custodians.
Bah wah wah ... yes, we are the allmightly :-D Anyway, would you be too unhappy
if we put this into next release? Since I just submitted my pullrq for -RC1 and
I won't be too happy to push this into -RC2, it's way too far past merge window.
> Albert what is your opinion ?
>
> >>> CCing Albert, Albert do you want me to push this through staging or
> >>> you'll pick this?
> >>>
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH][resubmit] eb_cpux9k2: add USB host support to board
2012-04-06 14:05 ` Marek Vasut
@ 2012-04-07 10:05 ` Jens Scharsig
0 siblings, 0 replies; 8+ messages in thread
From: Jens Scharsig @ 2012-04-07 10:05 UTC (permalink / raw)
To: u-boot
Dear Marek Vasut,
>>
>>> Dear esw at bus-elektronik.de,
>>>
>>>> Am 2012-04-01 18:14, schrieb Marek Vasut:
>>>>> Dear Jens Scharsig,
>>>>>
>>>>>> * add USB host support to eb_cpux9k2 board
>>>>>
>>>>> Did you test this too?
>>>>
>>>> Of course, I've test this with/against current RC1.
>>>
>>> Ok, I can pick this up and push through my staging ... or does Albert
>>> want to pick it directly via -arm (which would be better)?
>>
>> I don't know which is better. You are the custodians.
>
> Bah wah wah ... yes, we are the allmightly :-D Anyway, would you be too unhappy
> if we put this into next release? Since I just submitted my pullrq for -RC1 and
LOL
I have no problems to wait for next Release. I think you mean 2012.06.
The patch have has first anniversary in soon. I would happy, if it gives not a second anniversary ;-)
Best regards
Jens Scharsig
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH][resubmit] eb_cpux9k2: add USB host support to board
2012-04-01 15:29 [U-Boot] [PATCH][resubmit] eb_cpux9k2: add USB host support to board Jens Scharsig
2012-04-01 16:14 ` Marek Vasut
@ 2012-04-21 15:13 ` Wolfgang Denk
1 sibling, 0 replies; 8+ messages in thread
From: Wolfgang Denk @ 2012-04-21 15:13 UTC (permalink / raw)
To: u-boot
Dear Jens Scharsig,
In message <1333294142-7433-1-git-send-email-js_at_ng@scharsoft.de> you wrote:
> * add USB host support to eb_cpux9k2 board
>
> Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
> ---
> include/configs/eb_cpux9k2.h | 14 ++++++++++++++
> 1 files changed, 14 insertions(+), 0 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
All he had was nothing, but that was something, and now it had been
taken away. - Terry Pratchett, _Sourcery_
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2012-04-21 15:13 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-04-01 15:29 [U-Boot] [PATCH][resubmit] eb_cpux9k2: add USB host support to board Jens Scharsig
2012-04-01 16:14 ` Marek Vasut
2012-04-02 6:20 ` esw at bus-elektronik.de
2012-04-02 13:57 ` Marek Vasut
2012-04-06 8:55 ` Jens Scharsig
2012-04-06 14:05 ` Marek Vasut
2012-04-07 10:05 ` Jens Scharsig
2012-04-21 15:13 ` Wolfgang Denk
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox