From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Mon, 2 Apr 2012 15:57:19 +0200
Subject: [U-Boot] [PATCH][resubmit] eb_cpux9k2: add USB host support to
	board
In-Reply-To: <4F794532.9050708@bus-elektronik.de>
References: <1333294142-7433-1-git-send-email-js_at_ng@scharsoft.de>
	<201204011814.49948.marex@denx.de>
	<4F794532.9050708@bus-elektronik.de>
Message-ID: <201204021557.19844.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear esw at bus-elektronik.de,

> Am 2012-04-01 18:14, schrieb Marek Vasut:
> > Dear Jens Scharsig,
> > 
> >> * add USB host support to eb_cpux9k2 board
> > 
> > Did you test this too?
> 
> Of course, I've test this with/against current RC1.

Ok, I can pick this up and push through my staging ... or does Albert want to 
pick it directly via -arm (which would be better)?

> > CCing Albert, Albert do you want me to push this through staging or
> > you'll pick this?
> > 
> >> Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
> >> ---
> >> 
> >>  include/configs/eb_cpux9k2.h |   14 ++++++++++++++
> >>  1 files changed, 14 insertions(+), 0 deletions(-)
> >> 
> >> diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
> >> index 9046cf0..eb05e2a 100644
> >> --- a/include/configs/eb_cpux9k2.h
> >> +++ b/include/configs/eb_cpux9k2.h
> >> @@ -139,6 +139,8 @@
> >> 
> >>  #define CONFIG_CMD_PING
> >>  #define CONFIG_I2C_CMD_NO_FLAT
> >>  #define CONFIG_I2C_CMD_TREE
> >> 
> >> +#define CONFIG_CMD_USB
> >> +#define CONFIG_CMD_FAT
> >> 
> >>  #define CONFIG_SYS_LONGHELP
> >> 
> >> @@ -169,6 +171,18 @@
> >> 
> >>  /*
> >>  
> >>   * Hardware drivers
> >>   */
> >> 
> >> +#define CONFIG_USB_ATMEL
> >> +#define CONFIG_USB_OHCI_NEW
> >> +#define CONFIG_AT91C_PQFP_UHPBUG
> >> +#define CONFIG_USB_STORAGE
> >> +#define CONFIG_DOS_PARTITION
> >> +#define CONFIG_ISO_PARTITION
> >> +#define CONFIG_EFI_PARTITION
> >> +
> >> +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	1
> >> +#define CONFIG_SYS_USB_OHCI_CPU_INIT
> >> +#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00300000
> >> +#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91rm9200"
> >> 
> >>  /*
> >>  
> >>   * UART/CONSOLE
> > 
> > Best regards,
> > Marek Vasut
> 
> Tested-by: Jens Scharsig <js_at_ng@scharsoft.de>
> 
> 
> Best regards
> 
> Jens Scharsig
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot

Best regards,
Marek Vasut