From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marek.vasut@gmail.com>
Date: Mon, 2 Apr 2012 18:34:02 +0200
Subject: [U-Boot] MMC0: DMA transfer failed
In-Reply-To: <CAOMZO5Bzgis7WGyHOfV54oZN5GBe_YGAdCL6z3FRWM8ScsP_mw@mail.gmail.com>
References: <CAOMZO5AS2fdZTTCUW1+jRsPYFaBpYdyGaef3a7Kg5RBEDDqZJQ@mail.gmail.com>
	<201204021641.07017.marek.vasut@gmail.com>
	<CAOMZO5Bzgis7WGyHOfV54oZN5GBe_YGAdCL6z3FRWM8ScsP_mw@mail.gmail.com>
Message-ID: <201204021834.02948.marek.vasut@gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Fabio Estevam,

> On Mon, Apr 2, 2012 at 11:41 AM, Marek Vasut <marek.vasut@gmail.com> wrote:
> > No, it means I might just have a good card and I didn't notice this. I
> > really do need to get some crappy (new) cards to track down these
> > issues. Fabio, can you please try debugging this?
> 
> Ok, I am debugging this.
> 
> What do you think about the change below?
> 
> --- a/drivers/mmc/mxsmmc.c
> +++ b/drivers/mmc/mxsmmc.c
> @@ -191,7 +191,7 @@ mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
> struct else
>                 cache_data_count = data_count;
> 
> -       if (data->flags & MMC_DATA_READ) {
> +       if (data->flags & MMC_DATA_WRITE) {
>                 priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_WRITE;
>                 priv->desc->cmd.address = (dma_addr_t)data->dest;
>         } else {
> 
> It doesn't fix this issue, but it seems correct.

No it's not, when you do SD READ, you read the data into the dest buffer.

Best regards,
Marek Vasut