[U-Boot] [PATCH 3/7] LCD: add data structure for EXYNOS display driver

[U-Boot] [PATCH 3/7] LCD: add data structure for EXYNOS display driver

[Donghwa Lee]

Add vidinfo data structure for EXYNOS display driver

Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
---
 include/lcd.h |   64 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 64 insertions(+), 0 deletions(-)

diff --git a/include/lcd.h b/include/lcd.h
index d95feeb..3d9ef16 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -183,6 +183,70 @@ typedef struct vidinfo {
 	u_long	mmio;		/* Memory mapped registers */
 } vidinfo_t;
 
+#elif defined(CONFIG_EXYNOS_FB)
+
+enum {
+	FIMD_RGB_INTERFACE = 1,
+	FIMD_CPU_INTERFACE = 2,
+};
+
+typedef struct vidinfo {
+	ushort vl_col;		/* Number of columns (i.e. 640) */
+	ushort vl_row;		/* Number of rows (i.e. 480) */
+	ushort vl_width;	/* Width of display area in millimeters */
+	ushort vl_height;	/* Height of display area in millimeters */
+
+	/* LCD configuration register */
+	u_char vl_freq;		/* Frequency */
+	u_char vl_clkp;		/* Clock polarity */
+	u_char vl_oep;		/* Output Enable polarity */
+	u_char vl_hsp;		/* Horizontal Sync polarity */
+	u_char vl_vsp;		/* Vertical Sync polarity */
+	u_char vl_dp;		/* Data polarity */
+	u_char vl_bpix;		/* Bits per pixel */
+
+	/* Horizontal control register. Timing from data sheet */
+	u_char vl_hspw;		/* Horz sync pulse width */
+	u_char vl_hfpd;		/* Wait before of line */
+	u_char vl_hbpd;		/* Wait end of line */
+
+	/* Vertical control register. */
+	u_char	vl_vspw;	/* Vertical sync pulse width */
+	u_char	vl_vfpd;	/* Wait before of frame */
+	u_char	vl_vbpd;	/* Wait end of frame */
+	u_char  vl_cmd_allow_len; /* Wait end of frame */
+
+	void (*cfg_gpio)(void);
+	void (*backlight_on)(unsigned int onoff);
+	void (*reset_lcd)(void);
+	void (*lcd_power_on)(void);
+	void (*cfg_ldo)(void);
+	void (*enable_ldo)(unsigned int onoff);
+	void (*mipi_power)(void);
+	void (*backlight_reset)(void);
+
+	unsigned int win_id;
+	unsigned int init_delay;
+	unsigned int power_on_delay;
+	unsigned int reset_delay;
+	unsigned int interface_mode;
+	unsigned int mipi_enabled;
+	unsigned int cs_setup;
+	unsigned int wr_setup;
+	unsigned int wr_act;
+	unsigned int wr_hold;
+
+	/* parent clock name(MPLL, EPLL or VPLL) */
+	unsigned int pclk_name;
+	/* ratio value for source clock from parent clock. */
+	unsigned int sclk_div;
+
+	unsigned int dual_lcd_enabled;
+
+} vidinfo_t;
+
+void init_panel_info(vidinfo_t *vid);
+
 #else
 
 typedef struct vidinfo {
-- 
1.7.4.1

[U-Boot] [PATCH 3/7] LCD: add data structure for EXYNOS display driver

[Anatolij Gustschin]

Hi,

On Thu, 05 Apr 2012 15:29:24 +0900
Donghwa Lee <dh09.lee@samsung.com> wrote:

> Add vidinfo data structure for EXYNOS display driver
> 
> Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> Signed-off-by: Inki Dae <inki.dae@samsung.com>
> ---
>  include/lcd.h |   64 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  1 files changed, 64 insertions(+), 0 deletions(-)

Thanks for reworking, looks good.

Acked-by: Anatolij Gustschin <agust@denx.de>

This patch can be merged through u-boot-samsung git tree.
I'll comment on other video patches of this series soon.

Thanks,
Anatolij