From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] MXS NAND: DMA read error
Date: Tue, 17 Apr 2012 10:17:37 +0200 [thread overview]
Message-ID: <201204171017.37983.marex@denx.de> (raw)
In-Reply-To: <4F8D24C0.9090106@bluegiga.com>
Dear Lauri Hintsala,
> Hello,
>
> I'm trying to compile latest U-Boot to mx28evk (rev D) with NAND
> support. U-Boot boots up but NAND chip is not detected and DMA read
> error is popped up.
MX28 EVK has no NAND, right?
Otherwise, check if you have APBH DMA enabled in your include/configs/mx28evk.h
btw Fabio, can you please ping me on jabber?
> Here is console output:
>
> U-Boot 2012.04-rc2-dirty (Apr 17 2012 - 10:58:50)
>
> Freescale i.MX28 family at 454 MHz
> DRAM: 128 MiB
> NAND: MXS NAND: DMA read error (-110)
> MXS NAND: DMA read error (-110)
> MXS NAND: Error sending command
> MXS NAND: DMA read error (-110)
> MXS NAND: DMA read error (-110)
> MXS NAND: Error sending command
> MXS NAND: DMA read error (-110)
> MXS NAND: DMA read error (-110)
> MXS NAND: DMA read error (-110)
> MXS NAND: DMA read error (-110)
> MXS NAND: DMA read error (-110)
> MXS NAND: DMA read error (-110)
> MXS NAND: DMA read error (-110)
> MXS NAND: DMA read error (-110)
> No NAND device found!!!
> 0 MiB
>
>
> I did following changes to mainline code. Did I forget something?
>
> diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c
> index 9c95811..93e54da 100644
> --- a/drivers/mtd/nand/mxs_nand.c
> +++ b/drivers/mtd/nand/mxs_nand.c
> @@ -465,7 +465,7 @@ static void mxs_nand_read_buf(struct mtd_info *mtd,
> uint8_t *buf, int length)
> /* Execute the DMA chain. */
> ret = mxs_dma_go(channel);
> if (ret) {
> - printf("MXS NAND: DMA read error\n");
> + printf("MXS NAND: DMA read error (%d)\n", ret);
> goto rtn;
> }
>
> diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
> index 02f3366..a0bd2db 100644
> --- a/include/configs/mx28evk.h
> +++ b/include/configs/mx28evk.h
> @@ -148,6 +148,15 @@
> #endif
>
> /*
> + * NAND
> + */
> +#define CONFIG_CMD_NAND
> +#define CONFIG_NAND_MXS
> +#define CONFIG_SYS_MAX_NAND_DEVICE 1
> +#define CONFIG_SYS_NAND_BASE 0x60000000
> +#define CONFIG_SYS_NAND_5_ADDR_CYCLE
> +
> +/*
> * Ethernet on SOC (FEC)
> */
> #ifdef CONFIG_CMD_NET
>
>
> BR,
> Lauri Hintsala
Best regards,
Marek Vasut
next prev parent reply other threads:[~2012-04-17 8:17 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-17 8:07 [U-Boot] MXS NAND: DMA read error Lauri Hintsala
2012-04-17 8:17 ` Marek Vasut [this message]
2012-04-17 8:23 ` Lauri Hintsala
2012-04-17 8:29 ` Marek Vasut
2012-04-17 8:38 ` Lauri Hintsala
2012-04-17 9:05 ` Marek Vasut
2012-04-17 9:26 ` Lauri Hintsala
2012-04-17 10:17 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201204171017.37983.marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox