public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] powerpc/usb: fix bug of CPU halt when missing USB PHY clock
Date: Thu, 19 Apr 2012 10:24:13 +0200	[thread overview]
Message-ID: <201204191024.13943.marex@denx.de> (raw)
In-Reply-To: <3F453DDFF675A64A89321A1F3528102172E445@039-SN1MPN1-003.039d.mgd.msft.net>

Dear Liu Shengzhou-B36685,

> Hello guys,
> 
> I didn't get an explicit list from silicon team to point out which
> platforms contain this PHY_CLK_VALID bit or not, Someone said all
> platforms have this bit, it's not true, at least we found P4080 and P1022
> no this bit. I'll trace it later.
> 
> This patch is not necessary for boards with USB PHY clock valid, just for
> those case of USB PHY clock invalid.

Roger that, thanks a lot :)

> 
> Thanks,
> Shengzhou
> 
> > -----Original Message-----
> > From: Marek Vasut [mailto:marex at denx.de]
> > Sent: Thursday, April 19, 2012 6:57 AM
> > To: Andy Fleming
> > Cc: Liu Shengzhou-B36685; u-boot at lists.denx.de
> > Subject: Re: [U-Boot] [PATCH] powerpc/usb: fix bug of CPU halt when
> > missing USB PHY clock
> > 
> > Dear Andy Fleming,
> > 
> > > Pinging you on this, again. Also, I've now moved the patch to Marek's
> > > queue, instead of mine.
> > 
> > Thanks! Did the FSL silicon team respond already?
> > 
> > > On Sun, Feb 26, 2012 at 8:44 PM, Liu Shengzhou-B36685
> > > 
> > > <B36685@freescale.com> wrote:
> > > >> -----Original Message-----
> > > >> From: Marek Vasut [mailto:marex at denx.de]
> > > >> Sent: Monday, February 27, 2012 7:13 AM
> > > >> To: u-boot at lists.denx.de
> > > >> Cc: Liu Shengzhou-B36685
> > > >> Subject: Re: [U-Boot] [PATCH] powerpc/usb: fix bug of CPU halt when
> > > >> missing USB PHY clock
> > > >> 
> > > >> > when missing USB PHY clock and issuing "usb start" at u-boot
> > > >> > prompt, writing to or_portsc register will cause CPU halt. We
> > > >> > should check USBGP[PHY_CLK_VALID] bit at the first time in
> > > >> > ehci_hcd_init() to
> > > >> 
> > > >> avoid
> > > >> 
> > > >> > CPU hang in this case.
> > > >> > 
> > > >> > Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
> > > >> > ---
> > > >> > 
> > > >> >  drivers/usb/host/ehci-fsl.c |   22 +++++++++++++++++++---
> > > >> >  1 files changed, 19 insertions(+), 3 deletions(-)
> > > >> 
> > > >> Hi,
> > > >> 
> > > >> what's the status of this patch/patchset?
> > > >> 
> > > >> Thanks
> > > >> M
> > > > 
> > > > Currently we found that usb CTRL_PHY_CLK_VALID bit breaks on P1022
> > > > platform, which not contains this bit. - P1023/P3041/P5020 etc, have
> > > > this bit
> > > > 
> > > >  - P3060/4080/PSC913x do have this bit, but not mentioned in RM.
> > > >  - P1022(perhaps and other) has no this bit I'm waiting for the
> > > > 
> > > > response from FSL silicon team to confirm whether there is other
> > > > platform not including this bit or not, so this patch maybe have to
> > > > be pending until I get confirmation.
> > > > 
> > > > Thanks,
> > > > Shengzhou
> > > > 
> > > > 
> > > > _______________________________________________
> > > > U-Boot mailing list
> > > > U-Boot at lists.denx.de
> > > > http://lists.denx.de/mailman/listinfo/u-boot
> > 
> > Best regards,
> > Marek Vasut

Best regards,
Marek Vasut

  reply	other threads:[~2012-04-19  8:24 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-02-01  8:31 [U-Boot] [PATCH] powerpc/usb: fix bug of CPU halt when missing USB PHY clock Shengzhou Liu
2012-02-26 23:12 ` Marek Vasut
2012-02-27  2:44   ` Liu Shengzhou-B36685
2012-04-18 22:49     ` Andy Fleming
2012-04-18 22:57       ` Marek Vasut
2012-04-19  7:32         ` Liu Shengzhou-B36685
2012-04-19  8:24           ` Marek Vasut [this message]
2012-10-16  6:23           ` Marek Vasut
2012-10-18  3:40             ` Liu Shengzhou-B36685

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201204191024.13943.marex@denx.de \
    --to=marex@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox