[U-Boot] [PATCH 1/2] S3C2440 : PLL Initialization should be SoC specific

[Marek Vasut <marex@denx.de>]

Dear Gabriel Huau,

> Signed-off-by: Gabriel Huau <contact@huau-gabriel.fr>
> ---
>  arch/arm/cpu/arm920t/s3c24x0/timer.c |   36
> ++++++++++++++++++++++++++++++++++ board/mpl/vcma9/lowlevel_init.S      | 
>  22 --------------------- board/samsung/smdk2410/smdk2410.c    |   19
> ------------------
>  3 files changed, 36 insertions(+), 41 deletions(-)
> 
> diff --git a/arch/arm/cpu/arm920t/s3c24x0/timer.c
> b/arch/arm/cpu/arm920t/s3c24x0/timer.c index d8668be..7ff687c 100644
> --- a/arch/arm/cpu/arm920t/s3c24x0/timer.c
> +++ b/arch/arm/cpu/arm920t/s3c24x0/timer.c
> @@ -37,8 +37,27 @@
> 
>  DECLARE_GLOBAL_DATA_PTR;
> 
> +#ifdef CONFIG_S3C2440
> +/*
> + * PLL/Clock configuration
> + */
> +/* FCLK = 405 MHz, HCLK = 101 MHz, PCLK = 50 MHz, UCLK = 48 MHz */
> +#define CLKDIVN_VAL	7
> +#define M_MDIV		0x7f
> +#define M_PDIV		0x2
> +#define M_SDIV		0x1
> +
> +#define U_M_MDIV	0x38
> +#define U_M_PDIV	0x2
> +#define U_M_SDIV	0x2
> +#endif

So after applying your patch, timer driver won't build for 2410 ?

> +
>  int timer_init(void)
>  {
> +#ifdef CONFIG_S3C2440
> +	struct s3c24x0_clock_power * const clk_power =
> +					s3c24x0_get_base_clock_power();
> +#endif

gc-sections will handle this

>  	struct s3c24x0_timers *timers = s3c24x0_get_base_timers();
>  	ulong tmr;
> 
> @@ -65,6 +84,23 @@ int timer_init(void)
>  	gd->lastinc = 0;
>  	gd->tbl = 0;
> 
> +#ifdef CONFIG_S3C2440

DTTO

> +	/* to reduce PLL lock time, adjust the LOCKTIME register */
> +	clk_power->locktime = 0xFFFFFF;

unexplained magic

> +	clk_power->clkdivn = CLKDIVN_VAL;
> +
> +	/* configure UPLL */
> +	clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
> +	/* some delay between MPLL and UPLL */
> +	__udelay(10);

simple udelay() is ok.

> +
> +	/* configure MPLL */
> +	clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
> +
> +	/* some delay between MPLL and UPLL */
> +	__udelay(8000);
> +#endif
> +
>  	return 0;
>  }
> 
> diff --git a/board/mpl/vcma9/lowlevel_init.S
> b/board/mpl/vcma9/lowlevel_init.S index dadaac7..4deb451 100644
> --- a/board/mpl/vcma9/lowlevel_init.S
> +++ b/board/mpl/vcma9/lowlevel_init.S
> @@ -262,28 +262,6 @@ lowlevel_init:
>  	cmp     r3, r4
>  	bne     0b
> 
> -	/* setup MPLL registers */
> -	ldr	r1, =CLKBASE
> -	ldr	r4, =0xFFFFFF
> -	add	r3, r2, #4		/* r3 points to PLL values */
> -	str	r4, [r1, #LOCKTIME]
> -	ldmia	r3, {r4,r5}
> -	str	r5, [r1, #UPLLCON]	/* writing PLL register */
> -					/* !! order seems to be important !! */
> -	/* a little delay */
> -	ldr	r3, =0x4000
> -0:
> -	subs	r3, r3, #1
> -	bne	0b
> -
> -	str	r4, [r1, #MPLLCON]	/* writing PLL register */
> -					/* !! order seems to be important !! */
> -	/* a little delay */
> -	ldr	r3, =0x4000
> -0:
> -	subs	r3, r3, #1
> -	bne	0b
> -
>  	/* everything is fine now */
>  	mov	pc, lr
> 
> diff --git a/board/samsung/smdk2410/smdk2410.c
> b/board/samsung/smdk2410/smdk2410.c index e9ba922..3beb587 100644
> --- a/board/samsung/smdk2410/smdk2410.c
> +++ b/board/samsung/smdk2410/smdk2410.c
> @@ -69,27 +69,8 @@ static inline void pll_delay(unsigned long loops)
> 
>  int board_early_init_f(void)
>  {
> -	struct s3c24x0_clock_power * const clk_power =
> -					s3c24x0_get_base_clock_power();
>  	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
> 
> -	/* to reduce PLL lock time, adjust the LOCKTIME register */
> -	writel(0xFFFFFF, &clk_power->locktime);
> -
> -	/* configure MPLL */
> -	writel((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV,
> -	       &clk_power->mpllcon);
> -
> -	/* some delay between MPLL and UPLL */
> -	pll_delay(4000);
> -
> -	/* configure UPLL */
> -	writel((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV,
> -	       &clk_power->upllcon);
> -
> -	/* some delay between MPLL and UPLL */
> -	pll_delay(8000);
> -
>  	/* set up the I/O ports */
>  	writel(0x007FFFFF, &gpio->gpacon);
>  	writel(0x00044555, &gpio->gpbcon);

Magic?

Best regards,
Marek Vasut