[U-Boot] [PATCH 0/6 V3] EXYNOS5: USB: Enable USB 2.0 support

[U-Boot] [PATCH 0/6 V3] EXYNOS5: USB: Enable USB 2.0 support

[Rajeshwari Shinde]

This patchset series adds support to enable USB 2.0 on smdk5250.
It corrects sysreg register, usb host, usb otg base address,
adds power management registers,functions to enable and disable power
to the USB host controller are added.

This patchset is based on:
USB: EXYNOS: Add ehci support.patch

Rajeshwari Shinde (6):
  EXYNOS5: Fix system register structure
  EXYNOS5: Add structure for PMU registers
  USB: EXYNOS: Set USB 2.0 HOST Link mode
  EXYNOS: Add power Enable/Disable for USB-EHCI
  EXYNOS5: USB: Fix incorrect USB base addresses
  CONFIG: EXYNOS5: USB: Enable USB 2.0 on smdk5250

Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>

 arch/arm/cpu/armv7/exynos/power.c         |   22 +
 arch/arm/cpu/armv7/exynos/system.c        |   22 +
 arch/arm/include/asm/arch-exynos/cpu.h    |    4 +-
 arch/arm/include/asm/arch-exynos/power.h  |  626 +++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-exynos/system.h |    4 +
 drivers/usb/host/ehci-exynos.c            |    8 +
 include/configs/smdk5250.h                |    6 +
 7 files changed, 690 insertions(+), 2 deletions(-)

-- 
1.7.4.4

[U-Boot] [PATCH 1/6 V3] EXYNOS5: Fix system register structure

[Rajeshwari Shinde]

This patch corrects the SYSREG structure.
We have removed the sysreg.h added in the previous patchset
version as the sysreg structure is already defined in system.h.

Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>
---
Changes for v2:
	- Removed the definitions added for SYSREG registers as they were 
	already defined in system.h
	- Corrected the already exsisted exynos5_sysreg as per the user manual. 
 arch/arm/include/asm/arch-exynos/system.h |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/arch/arm/include/asm/arch-exynos/system.h b/arch/arm/include/asm/arch-exynos/system.h
index c85f949..c1d880f 100644
--- a/arch/arm/include/asm/arch-exynos/system.h
+++ b/arch/arm/include/asm/arch-exynos/system.h
@@ -42,6 +42,7 @@ struct exynos5_sysreg {
 	unsigned int	reserved;
 	unsigned int	ispblk_cfg;
 	unsigned int	usb20phy_cfg;
+	unsigned char	res2[0x29c];
 	unsigned int	mipi_dphy;
 	unsigned int	dptx_dphy;
 	unsigned int	phyclk_sel;
-- 
1.7.4.4

[U-Boot] [PATCH 2/6 V3] EXYNOS5: Add structure for PMU registers

[Rajeshwari Shinde]

This patch adds power mananagement registers structure for exynos5 SoC.

Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Chander Kashyap <chander.kashyap@linaro.org>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>
---
 arch/arm/include/asm/arch-exynos/power.h |  622 ++++++++++++++++++++++++++++++
 1 files changed, 622 insertions(+), 0 deletions(-)

diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h
index 6444fd0..4236beb 100644
--- a/arch/arm/include/asm/arch-exynos/power.h
+++ b/arch/arm/include/asm/arch-exynos/power.h
@@ -225,6 +225,628 @@ struct exynos4_power {
 	unsigned int	gps_alive_status;
 	unsigned int	gps_alive_option;
 };
+
+struct exynos5_power {
+	unsigned int	om_stat;
+	unsigned char	res1[0x18];
+	unsigned int	rtc_clko_sel;
+	unsigned int	gnss_rtc_out_ctrl;
+	unsigned char	res2[0x1dc];
+	unsigned int	central_seq_configuration;
+	unsigned int	central_seq_status;
+	unsigned int	central_seq_option;
+	unsigned char	res3[0x14];
+	unsigned int	seq_transition0;
+	unsigned int	seq_transition1;
+	unsigned int	seq_transition2;
+	unsigned int	seq_transition3;
+	unsigned int	seq_transition4;
+	unsigned int	seq_transition5;
+	unsigned int	seq_transition6;
+	unsigned int	seq_transition7;
+	unsigned int	central_seq_dmc_configuration;
+	unsigned int	central_seq_dmc_status;
+	unsigned int	central_seq_dmc_option;
+	unsigned char	res4[0x14];
+	unsigned int	seq_dmc_transition0;
+	unsigned int	seq_dmc_transition1;
+	unsigned int	seq_dmc_transition2;
+	unsigned int	seq_dmc_transition3;
+	unsigned int	seq_dmc_transition4;
+	unsigned int	seq_dmc_transition5;
+	unsigned int	seq_dmc_transition6;
+	unsigned int	seq_dmc_transition7;
+	unsigned char	res5[0x180];
+	unsigned int	swreset;
+	unsigned int	rst_stat;
+	unsigned int	automatic_wdt_reset_disable;
+	unsigned int	mask_wdt_reset_request;
+	unsigned int	mask_wreset_request;
+	unsigned char	res6[0xec];
+	unsigned int	reset_sequencer_configuration;
+	unsigned int	reset_sequencer_status;
+	unsigned int	reset_sequencer_option;
+	unsigned char	res7[0xf4];
+	unsigned int	wakeup_stat;
+	unsigned int	eint_wakeup_mask;
+	unsigned int	wakeup_mask;
+	unsigned int	wakeup_interrupt;
+	unsigned char	res8[0x10];
+	unsigned int	wakeup_stat_dmc;
+	unsigned int	eint_wakeup_mask_dmc;
+	unsigned int	wakeup_mask_dmc;
+	unsigned int	wakeup_interrupt_dmc;
+	unsigned char	res9[0xd0];
+	unsigned int	hdmi_phy_control;
+	unsigned int	usbdrd_phy_control;
+	unsigned int	usbhost_phy_control;
+	unsigned int	efnand_phy_control;
+	unsigned int	mipi_phy0_control;
+	unsigned int	mipi_phy1_control;
+	unsigned int	adc_phy_control;
+	unsigned int	mtcadc_phy_control;
+	unsigned int	dptx_phy_control;
+	unsigned int	sata_phy_control;
+	unsigned char	res10[0xd8];
+	unsigned int	inform0;
+	unsigned int	inform1;
+	unsigned int	inform2;
+	unsigned int	inform3;
+	unsigned int	sysip_dat0;
+	unsigned int	sysip_dat1;
+	unsigned int	sysip_dat2;
+	unsigned int	sysip_dat3;
+	unsigned char	res11[0xe0];
+	unsigned int	pmu_spare0;
+	unsigned int	pmu_spare1;
+	unsigned int	pmu_spare2;
+	unsigned int	pmu_spare3;
+	unsigned char	res12[0x70];
+	unsigned int	irom_data_reg0;
+	unsigned int	irom_data_reg1;
+	unsigned int	irom_data_reg2;
+	unsigned int	irom_data_reg3;
+	unsigned char	res13[0x70];
+	unsigned int	pmu_debug;
+	unsigned char	res14[0x5fc];
+	unsigned int	arm_core0_sys_pwr_reg;
+	unsigned int	dis_irq_arm_core0_local_sys_pwr_reg;
+	unsigned int	dis_irq_arm_core0_central_sys_pwr_reg;
+	unsigned char	res15[0x4];
+	unsigned int	arm_core1_sys_pwr_reg;
+	unsigned int	dis_irq_arm_core1_local_sys_pwr_reg;
+	unsigned int	dis_irq_arm_core1_central_sys_pwr_reg;
+	unsigned char	res16[0x24];
+	unsigned int	fsys_arm_sys_pwr_reg;
+	unsigned int	dis_irq_fsys_arm_local_sys_pwr_reg;
+	unsigned int	dis_irq_fsys_arm_central_sys_pwr_reg;
+	unsigned char	res17[0x4];
+	unsigned int	isp_arm_sys_pwr_reg;
+	unsigned int	dis_irq_isp_arm_local_sys_pwr_reg;
+	unsigned int	dis_irq_isp_arm_central_sys_pwr_reg;
+	unsigned char	res18[0x24];
+	unsigned int	arm_common_sys_pwr_reg;
+	unsigned char	res19[0x3c];
+	unsigned int	arm_l2_sys_pwr_reg;
+	unsigned char	res20[0x3c];
+	unsigned int	cmu_aclkstop_sys_pwr_reg;
+	unsigned int	cmu_sclkstop_sys_pwr_reg;
+	unsigned char	res21[0x4];
+	unsigned int	cmu_reset_sys_pwr_reg;
+	unsigned char	res22[0x10];
+	unsigned int	cmu_aclkstop_dmc_sys_pwr_reg;
+	unsigned int	cmu_sclkstop_dmc_sys_pwr_reg;
+	unsigned char	res23[0x4];
+	unsigned int	cmu_reset_dmc_sys_pwr_reg;
+	unsigned char	res24[0x8];
+	unsigned int	ddrphy_dlllock_sys_pwr_reg;
+	unsigned char	res25[0x4];
+	unsigned int	apll_sysclk_sys_pwr_reg;
+	unsigned int	mpll_sysclk_sys_pwr_reg;
+	unsigned int	vpll_sysclk_sys_pwr_reg;
+	unsigned int	epll_sysclk_sys_pwr_reg;
+	unsigned int	bpll_sysclk_sys_pwr_reg;
+	unsigned int	cpll_sysclk_sys_pwr_reg;
+	unsigned int	gpll_sysclk_sys_pwr_reg;
+	unsigned char	res26[0x8];
+	unsigned int	mplluser_sysclk_sys_pwr_reg;
+	unsigned char	res27[0x8];
+	unsigned int	bplluser_sysclk_sys_pwr_reg;
+	unsigned char	res28[0xc];
+	unsigned int	top_bus_sys_pwr_reg;
+	unsigned int	top_retention_sys_pwr_reg;
+	unsigned int	top_pwr_sys_pwr_reg;
+	unsigned char	res29[0x4];
+	unsigned int	top_bus_dmc_sys_pwr_reg;
+	unsigned int	top_retention_dmc_sys_pwr_reg;
+	unsigned int	top_pwr_dmc_sys_pwr_reg;
+	unsigned char	res30[0x4];
+	unsigned int	logic_reset_sys_pwr_reg;
+	unsigned int	oscclk_gate_sys_pwr_reg;
+	unsigned char	res31[0x8];
+	unsigned int	logic_reset_dmc_sys_pwr_reg;
+	unsigned int	oscclk_gate_dmc_sys_pwr_reg;
+	unsigned char	res32[0x8];
+	unsigned int	usbotg_mem_sys_pwr_reg;
+	unsigned char	res33[0x4];
+	unsigned int	g2d_mem_sys_pwr_reg;
+	unsigned int	usbdrd_mem_sys_pwr_reg;
+	unsigned int	efnand_mem_sys_pwr_reg;
+	unsigned int	cssys_mem_sys_pwr_reg;
+	unsigned int	secss_mem_sys_pwr_reg;
+	unsigned int	rotator_mem_sys_pwr_reg;
+	unsigned int	intram_mem_sys_pwr_reg;
+	unsigned int	introm_mem_sys_pwr_reg;
+	unsigned int	jpeg_mem_sys_pwr_reg;
+	unsigned int	hsi_mem_sys_pwr_reg;
+	unsigned char	res34[0x4];
+	unsigned int	mcuiop_mem_sys_pwr_reg;
+	unsigned char	res35[0x4];
+	unsigned int	sata_mem_sys_pwr_reg;
+	unsigned int	pad_retention_dram_sys_pwr_reg;
+	unsigned int	pad_retention_mau_sys_pwr_reg;
+	unsigned int	pad_retention_jtag_sys_pwr_reg;
+	unsigned char	res36[0xc];
+	unsigned int	pad_retention_mmc2_sys_pwr_reg;
+	unsigned int	pad_retention_mmc3_sys_pwr_reg;
+	unsigned int	pad_retention_gpio_sys_pwr_reg;
+	unsigned int	pad_retention_uart_sys_pwr_reg;
+	unsigned int	pad_retention_mmc0_sys_pwr_reg;
+	unsigned int	pad_retention_mmc1_sys_pwr_reg;
+	unsigned int	pad_retention_ebia_sys_pwr_reg;
+	unsigned int	pad_retention_ebib_sys_pwr_reg;
+	unsigned int	pad_retention_spi_sys_pwr_reg;
+	unsigned int	pad_retention_gpio_dmc_sys_pwr_reg;
+	unsigned int	pad_isolation_sys_pwr_reg;
+	unsigned char	res37[0xc];
+	unsigned int	pad_isolation_dmc_sys_pwr_reg;
+	unsigned char	res38[0xc];
+	unsigned int	pad_alv_sel_sys_pwr_reg;
+	unsigned char	res39[0x20];
+	unsigned int	xxti_sys_pwr_reg;
+	unsigned char	res40[0x38];
+	unsigned int	ext_regulator_sys_pwr_reg;
+	unsigned char	res41[0x3c];
+	unsigned int	gpio_mode_sys_pwr_reg;
+	unsigned char	res42[0x1c];
+	unsigned int	gpio_mode_dmc_sys_pwr_reg;
+	unsigned char	res43[0x1c];
+	unsigned int	gpio_mode_mau_sys_pwr_reg;
+	unsigned int	top_asb_reset_sys_pwr_reg;
+	unsigned int	top_asb_isolation_sys_pwr_reg;
+	unsigned char	res44[0xb4];
+	unsigned int	gscl_sys_pwr_reg;
+	unsigned int	isp_sys_pwr_reg;
+	unsigned int	mfc_sys_pwr_reg;
+	unsigned int	g3d_sys_pwr_reg;
+	unsigned char	res45[0x4];
+	unsigned int	disp1_sys_pwr_reg;
+	unsigned int	mau_sys_pwr_reg;
+	unsigned char	res46[0x64];
+	unsigned int	cmu_clkstop_gscl_sys_pwr_reg;
+	unsigned int	cmu_clkstop_isp_sys_pwr_reg;
+	unsigned int	cmu_clkstop_mfc_sys_pwr_reg;
+	unsigned int	cmu_clkstop_g3d_sys_pwr_reg;
+	unsigned char	res47[0x4];
+	unsigned int	cmu_clkstop_disp1_sys_pwr_reg;
+	unsigned int	cmu_clkstop_mau_sys_pwr_reg;
+	unsigned char	res48[0x24];
+	unsigned int	cmu_sysclk_gscl_sys_pwr_reg;
+	unsigned int	cmu_sysclk_isp_sys_pwr_reg;
+	unsigned int	cmu_sysclk_mfc_sys_pwr_reg;
+	unsigned int	cmu_sysclk_g3d_sys_pwr_reg;
+	unsigned char	res49[0x4];
+	unsigned int	cmu_sysclk_disp1_sys_pwr_reg;
+	unsigned int	cmu_sysclk_mau_sys_pwr_reg;
+	unsigned char	res50[0xa4];
+	unsigned int	cmu_reset_gscl_sys_pwr_reg;
+	unsigned int	cmu_reset_isp_sys_pwr_reg;
+	unsigned int	cmu_reset_mfc_sys_pwr_reg;
+	unsigned int	cmu_reset_g3d_sys_pwr_reg;
+	unsigned char	res51[0x4];
+	unsigned int	cmu_reset_disp1_sys_pwr_reg;
+	unsigned int	cmu_reset_mau_sys_pwr_reg;
+	unsigned char	res52[0xa64];
+	unsigned int	arm_core0_configuration;
+	unsigned int	arm_core0_status;
+	unsigned int	arm_core0_option;
+	unsigned char	res53[0x14];
+	unsigned int	dis_irq_arm_core0_local_configuration;
+	unsigned int	dis_irq_arm_core0_local_status;
+	unsigned int	dis_irq_arm_core0_local_option;
+	unsigned char	res54[0x14];
+	unsigned int	dis_irq_arm_core0_central_configuration;
+	unsigned int	dis_irq_arm_core0_central_status;
+	unsigned int	dis_irq_arm_core0_central_option;
+	unsigned char	res55[0x34];
+	unsigned int	arm_core1_configuration;
+	unsigned int	arm_core1_status;
+	unsigned int	arm_core1_option;
+	unsigned char	res56[0x14];
+	unsigned int	dis_irq_arm_core1_local_configuration;
+	unsigned int	dis_irq_arm_core1_local_status;
+	unsigned int	dis_irq_arm_core1_local_option;
+	unsigned char	res57[0x14];
+	unsigned int	dis_irq_arm_core1_central_configuration;
+	unsigned int	dis_irq_arm_core1_central_status;
+	unsigned int	dis_irq_arm_core1_central_option;
+	unsigned char	res58[0x134];
+	unsigned int	fsys_arm_configuration;
+	unsigned int	fsys_arm_status;
+	unsigned int	fsys_arm_option;
+	unsigned char	res59[0x14];
+	unsigned int	dis_irq_fsys_arm_local_configuration;
+	unsigned int	dis_irq_fsys_arm_local_status;
+	unsigned int	dis_irq_fsys_arm_local_option;
+	unsigned char	res60[0x14];
+	unsigned int	dis_irq_fsys_arm_central_configuration;
+	unsigned int	dis_irq_fsys_arm_central_status;
+	unsigned int	dis_irq_fsys_arm_central_option;
+	unsigned char	res61[0x34];
+	unsigned int	isp_arm_configuration;
+	unsigned int	isp_arm_status;
+	unsigned int	isp_arm_option;
+	unsigned char	res62[0x14];
+	unsigned int	dis_irq_isp_arm_local_configuration;
+	unsigned int	dis_irq_isp_arm_local_status;
+	unsigned int	dis_irq_isp_arm_local_option;
+	unsigned char	res63[0x14];
+	unsigned int	dis_irq_isp_arm_central_configuration;
+	unsigned int	dis_irq_isp_arm_central_status;
+	unsigned int	dis_irq_isp_arm_central_option;
+	unsigned char	res64[0x134];
+	unsigned int	arm_common_configuration;
+	unsigned int	arm_common_status;
+	unsigned int	arm_common_option;
+	unsigned char	res65[0x1f4];
+	unsigned int	arm_l2_configuration;
+	unsigned int	arm_l2_status;
+	unsigned int	arm_l2_option;
+	unsigned char	res66[0x1f4];
+	unsigned int	cmu_aclkstop_configuration;
+	unsigned int	cmu_aclkstop_status;
+	unsigned int	cmu_aclkstop_option;
+	unsigned char	res67[0x14];
+	unsigned int	cmu_sclkstop_configuration;
+	unsigned int	cmu_sclkstop_status;
+	unsigned int	cmu_sclkstop_option;
+	unsigned char	res68[0x34];
+	unsigned int	cmu_reset_configuration;
+	unsigned int	cmu_reset_status;
+	unsigned int	cmu_reset_option;
+	unsigned char	res69[0x94];
+	unsigned int	cmu_aclkstop_dmc_configuration;
+	unsigned int	cmu_aclkstop_dmc_status;
+	unsigned int	cmu_aclkstop_dmc_option;
+	unsigned char	res70[0x14];
+	unsigned int	cmu_sclkstop_dmc_configuration;
+	unsigned int	cmu_sclkstop_dmc_status;
+	unsigned int	cmu_sclkstop_dmc_option;
+	unsigned char	res71[0x34];
+	unsigned int	cmu_reset_dmc_configuration;
+	unsigned int	cmu_reset_dmc_status;
+	unsigned int	cmu_reset_dmc_option;
+	unsigned char	res72[0x54];
+	unsigned int	ddrphy_dlllock_configuration;
+	unsigned int	ddrphy_dlllock_status;
+	unsigned int	ddrphy_dlllock_option;
+	unsigned char	res73[0x34];
+	unsigned int	apll_sysclk_configuration;
+	unsigned int	apll_sysclk_status;
+	unsigned int	apll_sysclk_option;
+	unsigned char	res74[0x18];
+	unsigned int	mpll_sysclk_status;
+	unsigned int	mpll_sysclk_option;
+	unsigned char	res75[0x14];
+	unsigned int	vpll_sysclk_configuration;
+	unsigned int	vpll_sysclk_status;
+	unsigned int	vpll_sysclk_option;
+	unsigned char	res76[0x14];
+	unsigned int	epll_sysclk_configuration;
+	unsigned int	epll_sysclk_status;
+	unsigned int	epll_sysclk_option;
+	unsigned char	res77[0x14];
+	unsigned int	bpll_sysclk_configuration;
+	unsigned int	bpll_sysclk_status;
+	unsigned int	bpll_sysclk_option;
+	unsigned char	res78[0x14];
+	unsigned int	cpll_sysclk_configuration;
+	unsigned int	cpll_sysclk_status;
+	unsigned int	cpll_sysclk_option;
+	unsigned char	res79[0x14];
+	unsigned int	gpll_sysclk_configuration;
+	unsigned int	gpll_sysclk_status;
+	unsigned int	gpll_sysclk_option;
+	unsigned char	res80[0x54];
+	unsigned int	mplluser_sysclk_configuration;
+	unsigned int	mplluser_sysclk_status;
+	unsigned int	mplluser_sysclk_option;
+	unsigned char	res81[0x54];
+	unsigned int	bplluser_sysclk_configuration;
+	unsigned int	bplluser_sysclk_status;
+	unsigned int	bplluser_sysclk_option;
+	unsigned char	res82[0x74];
+	unsigned int	top_bus_configuration;
+	unsigned int	top_bus_status;
+	unsigned int	top_bus_option;
+	unsigned char	res83[0x14];
+	unsigned int	top_retention_configuration;
+	unsigned int	top_retention_status;
+	unsigned int	top_retention_option;
+	unsigned char	res84[0x14];
+	unsigned int	top_pwr_configuration;
+	unsigned int	top_pwr_status;
+	unsigned int	top_pwr_option;
+	unsigned char	res85[0x34];
+	unsigned int	top_bus_dmc_configuration;
+	unsigned int	top_bus_dmc_status;
+	unsigned int	top_bus_dmc_option;
+	unsigned char	res86[0x14];
+	unsigned int	top_retention_dmc_configuration;
+	unsigned int	top_retention_dmc_status;
+	unsigned int	top_retention_dmc_option;
+	unsigned char	res87[0x14];
+	unsigned int	top_pwr_dmc_configuration;
+	unsigned int	top_pwr_dmc_status;
+	unsigned int	top_pwr_dmc_option;
+	unsigned char	res88[0x34];
+	unsigned int	logic_reset_configuration;
+	unsigned int	logic_reset_status;
+	unsigned int	logic_reset_option;
+	unsigned char	res89[0x14];
+	unsigned int	oscclk_gate_configuration;
+	unsigned int	oscclk_gate_status;
+	unsigned int	oscclk_gate_option;
+	unsigned char	res90[0x54];
+	unsigned int	logic_reset_dmc_configuration;
+	unsigned int	logic_reset_dmc_status;
+	unsigned int	logic_reset_dmc_option;
+	unsigned char	res91[0x14];
+	unsigned int	oscclk_gate_dmc_configuration;
+	unsigned int	oscclk_gate_dmc_status;
+	unsigned int	oscclk_gate_dmc_option;
+	unsigned char	res92[0x54];
+	unsigned int	usbotg_mem_configuration;
+	unsigned int	usbotg_mem_status;
+	unsigned int	usbotg_mem_option;
+	unsigned char	res93[0x34];
+	unsigned int	g2d_mem_configuration;
+	unsigned int	g2d_mem_status;
+	unsigned int	g2d_mem_option;
+	unsigned char	res94[0x14];
+	unsigned int	usbdrd_mem_configuration;
+	unsigned int	usbdrd_mem_status;
+	unsigned int	usbdrd_mem_option;
+	unsigned char	res95[0x14];
+	unsigned int	efnand_mem_configuration;
+	unsigned int	efnand_mem_status;
+	unsigned int	efnand_mem_option;
+	unsigned char	res96[0x14];
+	unsigned int	cssys_mem_configuration;
+	unsigned int	cssys_mem_status;
+	unsigned int	cssys_mem_option;
+	unsigned char	res97[0x14];
+	unsigned int	secss_mem_configuration;
+	unsigned int	secss_mem_status;
+	unsigned int	secss_mem_option;
+	unsigned char	res98[0x14];
+	unsigned int	rotator_mem_configuration;
+	unsigned int	rotator_mem_status;
+	unsigned int	rotator_mem_option;
+	unsigned char	res99[0x14];
+	unsigned int	intram_mem_configuration;
+	unsigned int	intram_mem_status;
+	unsigned int	intram_mem_option;
+	unsigned char	res100[0x14];
+	unsigned int	introm_mem_configuration;
+	unsigned int	introm_mem_status;
+	unsigned int	introm_mem_option;
+	unsigned char	res101[0x14];
+	unsigned int	jpeg_mem_configuration;
+	unsigned int	jpeg_mem_status;
+	unsigned int	jpeg_mem_option;
+	unsigned char	res102[0x14];
+	unsigned int	hsi_mem_configuration;
+	unsigned int	hsi_mem_status;
+	unsigned int	hsi_mem_option;
+	unsigned char	res103[0x34];
+	unsigned int	mcuiop_mem_configuration;
+	unsigned int	mcuiop_mem_status;
+	unsigned int	mcuiop_mem_option;
+	unsigned char	res104[0x14];
+	unsigned int	sata_mem_configuration;
+	unsigned int	sata_mem_status;
+	unsigned int	sata_mem_option;
+	unsigned char	res105[0x34];
+	unsigned int	pad_retention_dram_configuration;
+	unsigned int	pad_retention_dram_status;
+	unsigned int	pad_retention_dram_option;
+	unsigned char	res106[0x14];
+	unsigned int	pad_retention_mau_configuration;
+	unsigned int	pad_retention_mau_status;
+	unsigned int	pad_retention_mau_option;
+	unsigned char	res107[0x14];
+	unsigned int	pad_retention_jtag_configuration;
+	unsigned int	pad_retention_jtag_status;
+	unsigned int	pad_retention_jtag_option;
+	unsigned char	res108[0x74];
+	unsigned int	pad_retention_mmc2_configuration;
+	unsigned int	pad_retention_mmc2_status;
+	unsigned int	pad_retention_mmc2_option;
+	unsigned char	res109[0x14];
+	unsigned int	pad_retention_mmc3_configuration;
+	unsigned int	pad_retention_mmc3_status;
+	unsigned int	pad_retention_mmc3_option;
+	unsigned char	res110[0x14];
+	unsigned int	pad_retention_gpio_configuration;
+	unsigned int	pad_retention_gpio_status;
+	unsigned int	pad_retention_gpio_option;
+	unsigned char	res111[0x14];
+	unsigned int	pad_retention_uart_configuration;
+	unsigned int	pad_retention_uart_status;
+	unsigned int	pad_retention_uart_option;
+	unsigned char	res112[0x14];
+	unsigned int	pad_retention_mmc0_configuration;
+	unsigned int	pad_retention_mmc0_status;
+	unsigned int	pad_retention_mmc0_option;
+	unsigned char	res113[0x14];
+	unsigned int	pad_retention_mmc1_configuration;
+	unsigned int	pad_retention_mmc1_status;
+	unsigned int	pad_retention_mmc1_option;
+	unsigned char	res114[0x14];
+	unsigned int	pad_retention_ebia_configuration;
+	unsigned int	pad_retention_ebia_status;
+	unsigned int	pad_retention_ebia_option;
+	unsigned char	res115[0x14];
+	unsigned int	pad_retention_ebib_configuration;
+	unsigned int	pad_retention_ebib_status;
+	unsigned int	pad_retention_ebib_option;
+	unsigned char	res116[0x14];
+	unsigned int	pad_retention_spi_configuration;
+	unsigned int	pad_retention_spi_status;
+	unsigned int	pad_retention_spi_option;
+	unsigned char	res117[0x14];
+	unsigned int	pad_retention_gpio_dmc_configuration;
+	unsigned int	pad_retention_gpio_dmc_status;
+	unsigned int	pad_retention_gpio_dmc_option;
+	unsigned char	res118[0x14];
+	unsigned int	pad_isolation_configuration;
+	unsigned int	pad_isolation_status;
+	unsigned int	pad_isolation_option;
+	unsigned char	res119[0x74];
+	unsigned int	pad_isolation_dmc_configuration;
+	unsigned int	pad_isolation_dmc_status;
+	unsigned int	pad_isolation_dmc_option;
+	unsigned char	res120[0x74];
+	unsigned int	pad_alv_sel_configuration;
+	unsigned int	pad_alv_sel_status;
+	unsigned int	pad_alv_sel_option0;
+	unsigned int	ps_hold_control;
+	unsigned char	res130[0x110];
+	unsigned int	xxti_configuration;
+	unsigned int	xxti_status;
+	unsigned int	xxti_option;
+	unsigned char	res131[0x10];
+	unsigned int	xxti_duration3;
+	unsigned char	res132[0x1c0];
+	unsigned int	ext_regulator_configuration;
+	unsigned int	ext_regulator_status;
+	unsigned int	ext_regulator_option;
+	unsigned char	res133[0x10];
+	unsigned int	ext_regulator_duration3;
+	unsigned char	res134[0x1e0];
+	unsigned int	gpio_mode_configuration;
+	unsigned int	gpio_mode_status;
+	unsigned int	gpio_mode_option;
+	unsigned char	res135[0xf4];
+	unsigned int	gpio_mode_dmc_configuration;
+	unsigned int	gpio_mode_dmc_status;
+	unsigned int	gpio_mode_dmc_option;
+	unsigned char	res136[0xd4];
+	unsigned int	gpio_mode_mau_configuration;
+	unsigned int	gpio_mode_mau_status;
+	unsigned int	gpio_mode_mau_option;
+	unsigned char	res137[0x14];
+	unsigned int	top_asb_reset_configuration;
+	unsigned int	top_asb_reset_status;
+	unsigned int	top_asb_reset_option;
+	unsigned char	res138[0x14];
+	unsigned int	top_asb_isolation_configuration;
+	unsigned int	top_asb_isolation_status;
+	unsigned int	top_asb_isolation_option;
+	unsigned char	res139[0x5d4];
+	unsigned int	gscl_configuration;
+	unsigned int	gscl_status;
+	unsigned int	gscl_option;
+	unsigned char	res140[0x14];
+	unsigned int	isp_configuration;
+	unsigned int	isp_status;
+	unsigned int	isp_option;
+	unsigned char	res141[0x14];
+	unsigned int	mfc_configuration;
+	unsigned int	mfc_status;
+	unsigned int	mfc_option;
+	unsigned char	res142[0x14];
+	unsigned int	g3d_configuration;
+	unsigned int	g3d_status;
+	unsigned int	g3d_option;
+	unsigned char	res143[0x34];
+	unsigned int	disp1_configuration;
+	unsigned int	disp1_status;
+	unsigned int	disp1_option;
+	unsigned char	res144[0x14];
+	unsigned int	mau_configuration;
+	unsigned int	mau_status;
+	unsigned int	mau_option;
+	unsigned char	res145[0x334];
+	unsigned int	cmu_clkstop_gscl_configuration;
+	unsigned int	cmu_clkstop_gscl_status;
+	unsigned int	cmu_clkstop_gscl_option;
+	unsigned char	res146[0x14];
+	unsigned int	cmu_clkstop_isp_configuration;
+	unsigned int	cmu_clkstop_isp_status;
+	unsigned int	cmu_clkstop_isp_option;
+	unsigned char	res147[0x14];
+	unsigned int	cmu_clkstop_mfc_configuration;
+	unsigned int	cmu_clkstop_mfc_status;
+	unsigned int	cmu_clkstop_mfc_option;
+	unsigned char	res148[0x14];
+	unsigned int	cmu_clkstop_g3d_configuration;
+	unsigned int	cmu_clkstop_g3d_status;
+	unsigned int	cmu_clkstop_g3d_option;
+	unsigned char	res149[0x34];
+	unsigned int	cmu_clkstop_disp1_configuration;
+	unsigned int	cmu_clkstop_disp1_status;
+	unsigned int	cmu_clkstop_disp1_option;
+	unsigned char	res150[0x14];
+	unsigned int	cmu_clkstop_mau_configuration;
+	unsigned int	cmu_clkstop_mau_status;
+	unsigned int	cmu_clkstop_mau_option;
+	unsigned char	res151[0x134];
+	unsigned int	cmu_sysclk_gscl_configuration;
+	unsigned int	cmu_sysclk_gscl_status;
+	unsigned int	cmu_sysclk_gscl_option;
+	unsigned char	res152[0x18];
+	unsigned int	cmu_sysclk_isp_status;
+	unsigned int	cmu_sysclk_isp_option;
+	unsigned char	res153[0x18];
+	unsigned int	cmu_sysclk_mfc_status;
+	unsigned int	cmu_sysclk_mfc_option;
+	unsigned char	res154[0x18];
+	unsigned int	cmu_sysclk_g3d_status;
+	unsigned int	cmu_sysclk_g3d_option;
+	unsigned char	res155[0x38];
+	unsigned int	cmu_sysclk_disp1_status;
+	unsigned int	cmu_sysclk_disp1_option;
+	unsigned char	res156[0x18];
+	unsigned int	cmu_sysclk_mau_status;
+	unsigned int	cmu_sysclk_mau_option;
+	unsigned char	res157[0x534];
+	unsigned int	cmu_reset_gscl_configuration;
+	unsigned int	cmu_reset_gscl_status;
+	unsigned int	cmu_reset_gscl_option;
+	unsigned char	res158[0x14];
+	unsigned int	cmu_reset_isp_configuration;
+	unsigned int	cmu_reset_isp_status;
+	unsigned int	cmu_reset_isp_option;
+	unsigned char	res159[0x14];
+	unsigned int	cmu_reset_mfc_configuration;
+	unsigned int	cmu_reset_mfc_status;
+	unsigned int	cmu_reset_mfc_option;
+	unsigned char	res160[0x14];
+	unsigned int	cmu_reset_g3d_configuration;
+	unsigned int	cmu_reset_g3d_status;
+	unsigned int	cmu_reset_g3d_option;
+	unsigned char	res161[0x34];
+	unsigned int	cmu_reset_disp1_configuration;
+	unsigned int	cmu_reset_disp1_status;
+	unsigned int	cmu_reset_disp1_option;
+	unsigned char	res162[0x14];
+	unsigned int	cmu_reset_mau_configuration;
+	unsigned int	cmu_reset_mau_status;
+	unsigned int	cmu_reset_mau_option;
+	unsigned char	res163[0x24];
+};
 #endif	/* __ASSEMBLY__ */
 
 void set_mipi_phy_ctrl(unsigned int dev_index, unsigned int enable);
-- 
1.7.4.4

[U-Boot] [PATCH 3/6 V3] USB: EXYNOS: Set USB 2.0 HOST Link mode

[Rajeshwari Shinde]

This patch adds a function to set usb host mode to USB 2.0 HOST Link
for EXYNOS5

Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
---
Changes for v2:
	- Setting SYSREG registers was moved to System.c
	- This setting of SYSREG registers was moved to seperate patch
Changes for v3:
	- Placed setting usbhost function to top of set_system_display
	- Renamed enable_usbhost_mode and exynos5_enable_usbhost_mode to
	set_usbhost_mode and exynos5_set_usbhost_mode.
This patch is based on:
USB: EXYNOS: Add ehci support.patch	
 arch/arm/cpu/armv7/exynos/system.c        |   22 ++++++++++++++++++++++
 arch/arm/include/asm/arch-exynos/system.h |    3 +++
 drivers/usb/host/ehci-exynos.c            |    3 +++
 3 files changed, 28 insertions(+), 0 deletions(-)

diff --git a/arch/arm/cpu/armv7/exynos/system.c b/arch/arm/cpu/armv7/exynos/system.c
index 6c34730..cc6ee03 100644
--- a/arch/arm/cpu/armv7/exynos/system.c
+++ b/arch/arm/cpu/armv7/exynos/system.c
@@ -25,6 +25,28 @@
 #include <asm/io.h>
 #include <asm/arch/system.h>
 
+static void exynos5_set_usbhost_mode(unsigned int mode)
+{
+	struct exynos5_sysreg *sysreg =
+		(struct exynos5_sysreg *)samsung_get_base_sysreg();
+	unsigned int phy_cfg;
+
+	/* Setting USB20PHY_CONFIG register to USB 2.0 HOST link */
+	if (mode == USB20_PHY_CFG_HOST_LINK_EN) {
+		setbits_le32(&sysreg->usb20phy_cfg,
+				USB20_PHY_CFG_HOST_LINK_EN);
+	} else {
+		clrbits_le32(&sysreg->usb20phy_cfg,
+				USB20_PHY_CFG_HOST_LINK_EN);
+	}
+}
+
+void set_usbhost_mode(unsigned int mode)
+{
+	if (cpu_is_exynos5())
+		exynos5_set_usbhost_mode(mode);
+}
+
 static void exynos4_set_system_display(void)
 {
 	struct exynos4_sysreg *sysreg =
diff --git a/arch/arm/include/asm/arch-exynos/system.h b/arch/arm/include/asm/arch-exynos/system.h
index c1d880f..42e1d21 100644
--- a/arch/arm/include/asm/arch-exynos/system.h
+++ b/arch/arm/include/asm/arch-exynos/system.h
@@ -49,6 +49,9 @@ struct exynos5_sysreg {
 };
 #endif
 
+#define USB20_PHY_CFG_HOST_LINK_EN	(1 << 0)
+
+void set_usbhost_mode(unsigned int mode);
 void set_system_display_ctrl(void);
 
 #endif	/* _EXYNOS4_SYSTEM_H */
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index 3830c43..90d66d3 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -24,12 +24,15 @@
 #include <usb.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/ehci.h>
+#include <asm/arch/system.h>
 #include "ehci.h"
 #include "ehci-core.h"
 
 /* Setup the EHCI host controller. */
 static void setup_usb_phy(struct exynos_usb_phy *usb)
 {
+	set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN);
+
 	clrbits_le32(&usb->usbphyctrl0,
 			HOST_CTRL0_FSEL_MASK |
 			HOST_CTRL0_COMMONON_N |
-- 
1.7.4.4

[U-Boot] [PATCH 4/6 V3] EXYNOS: Add power Enable/Disable for USB-EHCI

[Rajeshwari Shinde]

This patch adds functions to enable/disable the power of USB
host controller for EXYNOS5.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
---
Chnages in v2:
	- Removed setting of SYSREG registers and moved to system.c.
	- Enabling and Disabling of USB_PHY_CTRL was moved to single function.
Changes in v3:
	- Removed function to set PS_HOLD as it was not required for USB.
	- Renamed power_enable_usb_phy and exynos5_enable_usb_phy to
	set_usb_phy_ctrl and exynos5_set_usb_phy_ctrl.
	- Added defination for POWER_USB_HOST_PHY_CTRL_DISABLE.
This patch is based on:
USB: EXYNOS: Add ehci support.patch
 arch/arm/cpu/armv7/exynos/power.c        |   22 ++++++++++++++++++++++
 arch/arm/include/asm/arch-exynos/power.h |    4 ++++
 drivers/usb/host/ehci-exynos.c           |    5 +++++
 3 files changed, 31 insertions(+), 0 deletions(-)

diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c
index c765304..e09917f 100644
--- a/arch/arm/cpu/armv7/exynos/power.c
+++ b/arch/arm/cpu/armv7/exynos/power.c
@@ -52,3 +52,25 @@ void set_mipi_phy_ctrl(unsigned int dev_index, unsigned int enable)
 	if (cpu_is_exynos4())
 		exynos4_mipi_phy_control(dev_index, enable);
 }
+
+void exynos5_set_usb_phy_ctrl(unsigned int enable)
+{
+	struct exynos5_power *power =
+		(struct exynos5_power *)samsung_get_base_power();
+
+	if (enable) {
+		/* Enabling USBHOST_PHY */
+		setbits_le32(&power->usbhost_phy_control,
+				POWER_USB_HOST_PHY_CTRL_EN);
+	} else {
+		/* Disabling USBHOST_PHY */
+		clrbits_le32(&power->usbhost_phy_control,
+				POWER_USB_HOST_PHY_CTRL_EN);
+	}
+}
+
+void set_usb_phy_ctrl(unsigned int enable)
+{
+	if (cpu_is_exynos5())
+		exynos5_set_usb_phy_ctrl(enable);
+}
diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h
index 4236beb..30aba16 100644
--- a/arch/arm/include/asm/arch-exynos/power.h
+++ b/arch/arm/include/asm/arch-exynos/power.h
@@ -855,4 +855,8 @@ void set_mipi_phy_ctrl(unsigned int dev_index, unsigned int enable);
 #define EXYNOS_MIPI_PHY_SRESETN		(1 << 1)
 #define EXYNOS_MIPI_PHY_MRESETN		(1 << 2)
 
+void set_usb_phy_ctrl(unsigned int enable);
+
+#define POWER_USB_HOST_PHY_CTRL_EN		(1 << 0)
+#define POWER_USB_HOST_PHY_CTRL_DISABLE		(0 << 0)
 #endif
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index 90d66d3..093b13d 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -25,6 +25,7 @@
 #include <asm/arch/cpu.h>
 #include <asm/arch/ehci.h>
 #include <asm/arch/system.h>
+#include <asm/arch/power.h>
 #include "ehci.h"
 #include "ehci-core.h"
 
@@ -33,6 +34,8 @@ static void setup_usb_phy(struct exynos_usb_phy *usb)
 {
 	set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN);
 
+	set_usb_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN);
+
 	clrbits_le32(&usb->usbphyctrl0,
 			HOST_CTRL0_FSEL_MASK |
 			HOST_CTRL0_COMMONON_N |
@@ -73,6 +76,8 @@ static void reset_usb_phy(struct exynos_usb_phy *usb)
 			HOST_CTRL0_SIDDQ |
 			HOST_CTRL0_FORCESUSPEND |
 			HOST_CTRL0_FORCESLEEP);
+
+	set_usb_phy_ctrl(POWER_USB_HOST_PHY_CTRL_DISABLE);
 }
 
 /*
-- 
1.7.4.4

[U-Boot] [PATCH 5/6 V3] EXYNOS5: USB: Fix incorrect USB base addresses

[Rajeshwari Shinde]

This patch corrects the base addresses for USB_PHY and USB_OTG.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Chander Kashyap <chander.kashyap@linaro.org>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>
---
 arch/arm/include/asm/arch-exynos/cpu.h |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
index 85d421d..8d5d2b5 100644
--- a/arch/arm/include/asm/arch-exynos/cpu.h
+++ b/arch/arm/include/asm/arch-exynos/cpu.h
@@ -70,10 +70,10 @@
 #define EXYNOS5_GPIO_PART1_BASE		0x11400000
 #define EXYNOS5_MIPI_DSIM_BASE		0x11D00000
 #define EXYNOS5_USB_HOST_EHCI_BASE	0x12110000
+#define EXYNOS5_USBPHY_BASE		0x12130000
+#define EXYNOS5_USBOTG_BASE		0x12140000
 #define EXYNOS5_MMC_BASE		0x12200000
 #define EXYNOS5_SROMC_BASE		0x12250000
-#define EXYNOS5_USBOTG_BASE		0x12480000
-#define EXYNOS5_USBPHY_BASE		0x12480000
 #define EXYNOS5_UART_BASE		0x12C00000
 #define EXYNOS5_PWMTIMER_BASE		0x12DD0000
 #define EXYNOS5_GPIO_PART2_BASE		0x13400000
-- 
1.7.4.4

[U-Boot] [PATCH 6/6 V3] CONFIG: EXYNOS5: USB: Enable USB 2.0 on smdk5250

[Rajeshwari Shinde]

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>
---
 include/configs/smdk5250.h |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h
index 9659f9e..47cbb0b 100644
--- a/include/configs/smdk5250.h
+++ b/include/configs/smdk5250.h
@@ -101,6 +101,12 @@
 #define CONFIG_BOOTDELAY		3
 #define CONFIG_ZERO_BOOTDELAY_CHECK
 
+/* USB */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_EXYNOS
+#define CONFIG_USB_STORAGE
+
 /* MMC SPL */
 #define CONFIG_SPL
 #define COPY_BL2_FNPTR_ADDR	0x02020030
-- 
1.7.4.4

[U-Boot] [PATCH 1/6 V3] EXYNOS5: Fix system register structure

[Marek Vasut]

Dear Rajeshwari Shinde,

> This patch corrects the SYSREG structure.
> We have removed the sysreg.h added in the previous patchset
> version as the sysreg structure is already defined in system.h.
> 
> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
> Acked-by: Minkyu Kang <mk7.kang@samsung.com>
> ---
> Changes for v2:
> 	- Removed the definitions added for SYSREG registers as they were
> 	already defined in system.h
> 	- Corrected the already exsisted exynos5_sysreg as per the user manual.
>  arch/arm/include/asm/arch-exynos/system.h |    1 +
>  1 files changed, 1 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/include/asm/arch-exynos/system.h
> b/arch/arm/include/asm/arch-exynos/system.h index c85f949..c1d880f 100644
> --- a/arch/arm/include/asm/arch-exynos/system.h
> +++ b/arch/arm/include/asm/arch-exynos/system.h

Ok, I tried applying this, but system.h is missing in my tree ... did I miss any 
other patchset?

> @@ -42,6 +42,7 @@ struct exynos5_sysreg {
>  	unsigned int	reserved;
>  	unsigned int	ispblk_cfg;
>  	unsigned int	usb20phy_cfg;
> +	unsigned char	res2[0x29c];
>  	unsigned int	mipi_dphy;
>  	unsigned int	dptx_dphy;
>  	unsigned int	phyclk_sel;

Best regards,
Marek Vasut

[U-Boot] [PATCH 1/6 V3] EXYNOS5: Fix system register structure

[Chander Kashyap]

Dear Marek,


On 9 May 2012 14:19, Marek Vasut <marex@denx.de> wrote:
> Dear Rajeshwari Shinde,
>
>> This patch corrects the SYSREG structure.
>> We have removed the sysreg.h added in the previous patchset
>> version as the sysreg structure is already defined in system.h.
>>
>> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
>> Acked-by: Minkyu Kang <mk7.kang@samsung.com>
>> ---
>> Changes for v2:
>> ? ? ? - Removed the definitions added for SYSREG registers as they were
>> ? ? ? already defined in system.h
>> ? ? ? - Corrected the already exsisted exynos5_sysreg as per the user manual.
>> ?arch/arm/include/asm/arch-exynos/system.h | ? ?1 +
>> ?1 files changed, 1 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/include/asm/arch-exynos/system.h
>> b/arch/arm/include/asm/arch-exynos/system.h index c85f949..c1d880f 100644
>> --- a/arch/arm/include/asm/arch-exynos/system.h
>> +++ b/arch/arm/include/asm/arch-exynos/system.h
>
> Ok, I tried applying this, but system.h is missing in my tree ... did I miss any
> other patchset?
>

Well patches are already availabel at u-boot-arm tree.
http://git.denx.de/?p=u-boot/u-boot-arm.git;a=summary

>> @@ -42,6 +42,7 @@ struct exynos5_sysreg {
>> ? ? ? unsigned int ? ?reserved;
>> ? ? ? unsigned int ? ?ispblk_cfg;
>> ? ? ? unsigned int ? ?usb20phy_cfg;
>> + ? ? unsigned char ? res2[0x29c];
>> ? ? ? unsigned int ? ?mipi_dphy;
>> ? ? ? unsigned int ? ?dptx_dphy;
>> ? ? ? unsigned int ? ?phyclk_sel;
>
> Best regards,
> Marek Vasut
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot



-- 
with warm regards,
Chander Kashyap

[U-Boot] [PATCH 1/6 V3] EXYNOS5: Fix system register structure

[Chander Kashyap]

On 9 May 2012 15:17, Chander Kashyap <chander.kashyap@linaro.org> wrote:
> Dear Marek,
>
>
> On 9 May 2012 14:19, Marek Vasut <marex@denx.de> wrote:
>> Dear Rajeshwari Shinde,
>>
>>> This patch corrects the SYSREG structure.
>>> We have removed the sysreg.h added in the previous patchset
>>> version as the sysreg structure is already defined in system.h.
>>>
>>> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
>>> Acked-by: Minkyu Kang <mk7.kang@samsung.com>
>>> ---
>>> Changes for v2:
>>> ? ? ? - Removed the definitions added for SYSREG registers as they were
>>> ? ? ? already defined in system.h
>>> ? ? ? - Corrected the already exsisted exynos5_sysreg as per the user manual.
>>> ?arch/arm/include/asm/arch-exynos/system.h | ? ?1 +
>>> ?1 files changed, 1 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/arch/arm/include/asm/arch-exynos/system.h
>>> b/arch/arm/include/asm/arch-exynos/system.h index c85f949..c1d880f 100644
>>> --- a/arch/arm/include/asm/arch-exynos/system.h
>>> +++ b/arch/arm/include/asm/arch-exynos/system.h
>>
>> Ok, I tried applying this, but system.h is missing in my tree ... did I miss any
>> other patchset?
>>
>
> Well patches are already availabel at u-boot-arm tree.
> http://git.denx.de/?p=u-boot/u-boot-arm.git;a=summary

EXYNOS: definitions of system resgister and power management registers.

>
>>> @@ -42,6 +42,7 @@ struct exynos5_sysreg {
>>> ? ? ? unsigned int ? ?reserved;
>>> ? ? ? unsigned int ? ?ispblk_cfg;
>>> ? ? ? unsigned int ? ?usb20phy_cfg;
>>> + ? ? unsigned char ? res2[0x29c];
>>> ? ? ? unsigned int ? ?mipi_dphy;
>>> ? ? ? unsigned int ? ?dptx_dphy;
>>> ? ? ? unsigned int ? ?phyclk_sel;
>>
>> Best regards,
>> Marek Vasut
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>
>
>
> --
> with warm regards,
> Chander Kashyap



-- 
with warm regards,
Chander Kashyap

[U-Boot] [PATCH 1/6 V3] EXYNOS5: Fix system register structure

[Marek Vasut]

Dear Chander Kashyap,

> On 9 May 2012 15:17, Chander Kashyap <chander.kashyap@linaro.org> wrote:
> > Dear Marek,
> > 
> > On 9 May 2012 14:19, Marek Vasut <marex@denx.de> wrote:
> >> Dear Rajeshwari Shinde,
> >> 
> >>> This patch corrects the SYSREG structure.
> >>> We have removed the sysreg.h added in the previous patchset
> >>> version as the sysreg structure is already defined in system.h.
> >>> 
> >>> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
> >>> Acked-by: Minkyu Kang <mk7.kang@samsung.com>
> >>> ---
> >>> Changes for v2:
> >>>       - Removed the definitions added for SYSREG registers as they were
> >>>       already defined in system.h
> >>>       - Corrected the already exsisted exynos5_sysreg as per the user
> >>> manual. arch/arm/include/asm/arch-exynos/system.h |    1 +
> >>>  1 files changed, 1 insertions(+), 0 deletions(-)
> >>> 
> >>> diff --git a/arch/arm/include/asm/arch-exynos/system.h
> >>> b/arch/arm/include/asm/arch-exynos/system.h index c85f949..c1d880f
> >>> 100644 --- a/arch/arm/include/asm/arch-exynos/system.h
> >>> +++ b/arch/arm/include/asm/arch-exynos/system.h
> >> 
> >> Ok, I tried applying this, but system.h is missing in my tree ... did I
> >> miss any other patchset?
> > 
> > Well patches are already availabel at u-boot-arm tree.
> > http://git.denx.de/?p=u-boot/u-boot-arm.git;a=summary
> 
> EXYNOS: definitions of system resgister and power management registers.

I see ... I'll wait until these are mainline then.

> 
> >>> @@ -42,6 +42,7 @@ struct exynos5_sysreg {
> >>>       unsigned int    reserved;
> >>>       unsigned int    ispblk_cfg;
> >>>       unsigned int    usb20phy_cfg;
> >>> +     unsigned char   res2[0x29c];
> >>>       unsigned int    mipi_dphy;
> >>>       unsigned int    dptx_dphy;
> >>>       unsigned int    phyclk_sel;
> >> 
> >> Best regards,
> >> Marek Vasut
> > 
> > --
> > with warm regards,
> > Chander Kashyap

Best regards,
Marek Vasut

[U-Boot] [PATCH 3/6 V3] USB: EXYNOS: Set USB 2.0 HOST Link mode

[Minkyu Kang]

On 8 May 2012 19:11, Rajeshwari Shinde <rajeshwari.s@samsung.com> wrote:
> This patch adds a function to set usb host mode to USB 2.0 HOST Link
> for EXYNOS5
>
> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
> ---
> Changes for v2:
> ? ? ? ?- Setting SYSREG registers was moved to System.c
> ? ? ? ?- This setting of SYSREG registers was moved to seperate patch
> Changes for v3:
> ? ? ? ?- Placed setting usbhost function to top of set_system_display
> ? ? ? ?- Renamed enable_usbhost_mode and exynos5_enable_usbhost_mode to
> ? ? ? ?set_usbhost_mode and exynos5_set_usbhost_mode.
> This patch is based on:
> USB: EXYNOS: Add ehci support.patch
> ?arch/arm/cpu/armv7/exynos/system.c ? ? ? ?| ? 22 ++++++++++++++++++++++
> ?arch/arm/include/asm/arch-exynos/system.h | ? ?3 +++
> ?drivers/usb/host/ehci-exynos.c ? ? ? ? ? ?| ? ?3 +++
> ?3 files changed, 28 insertions(+), 0 deletions(-)
>

Acked-by: Minkyu Kang <mk7.kang@samsung.com>

-- 
from. prom.
www.promsoft.net

[U-Boot] [PATCH 4/6 V3] EXYNOS: Add power Enable/Disable for USB-EHCI

[Minkyu Kang]

Dear Rajeshwari Shinde,

On 8 May 2012 19:12, Rajeshwari Shinde <rajeshwari.s@samsung.com> wrote:
> This patch adds functions to enable/disable the power of USB
> host controller for EXYNOS5.
>
> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
> Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>
> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
> ---
> Chnages in v2:
> ? ? ? ?- Removed setting of SYSREG registers and moved to system.c.
> ? ? ? ?- Enabling and Disabling of USB_PHY_CTRL was moved to single function.
> Changes in v3:
> ? ? ? ?- Removed function to set PS_HOLD as it was not required for USB.
> ? ? ? ?- Renamed power_enable_usb_phy and exynos5_enable_usb_phy to
> ? ? ? ?set_usb_phy_ctrl and exynos5_set_usb_phy_ctrl.
> ? ? ? ?- Added defination for POWER_USB_HOST_PHY_CTRL_DISABLE.
> This patch is based on:
> USB: EXYNOS: Add ehci support.patch
> ?arch/arm/cpu/armv7/exynos/power.c ? ? ? ?| ? 22 ++++++++++++++++++++++
> ?arch/arm/include/asm/arch-exynos/power.h | ? ?4 ++++
> ?drivers/usb/host/ehci-exynos.c ? ? ? ? ? | ? ?5 +++++
> ?3 files changed, 31 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c
> index c765304..e09917f 100644
> --- a/arch/arm/cpu/armv7/exynos/power.c
> +++ b/arch/arm/cpu/armv7/exynos/power.c
> @@ -52,3 +52,25 @@ void set_mipi_phy_ctrl(unsigned int dev_index, unsigned int enable)
> ? ? ? ?if (cpu_is_exynos4())
> ? ? ? ? ? ? ? ?exynos4_mipi_phy_control(dev_index, enable);
> ?}
> +
> +void exynos5_set_usb_phy_ctrl(unsigned int enable)

We have usb device also.
How about usbhost_phy instead of usb_phy?

> +{
> + ? ? ? struct exynos5_power *power =
> + ? ? ? ? ? ? ? (struct exynos5_power *)samsung_get_base_power();
> +
> + ? ? ? if (enable) {
> + ? ? ? ? ? ? ? /* Enabling USBHOST_PHY */
> + ? ? ? ? ? ? ? setbits_le32(&power->usbhost_phy_control,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_USB_HOST_PHY_CTRL_EN);
> + ? ? ? } else {
> + ? ? ? ? ? ? ? /* Disabling USBHOST_PHY */
> + ? ? ? ? ? ? ? clrbits_le32(&power->usbhost_phy_control,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_USB_HOST_PHY_CTRL_EN);
> + ? ? ? }
> +}
> +
> +void set_usb_phy_ctrl(unsigned int enable)
> +{
> + ? ? ? if (cpu_is_exynos5())
> + ? ? ? ? ? ? ? exynos5_set_usb_phy_ctrl(enable);
> +}

Thanks.
Minkyu Kang.
-- 
from. prom.
www.promsoft.net

[U-Boot] [PATCH 0/6 V3] EXYNOS5: USB: Enable USB 2.0 support

[Joonyoung Shim]

Hi, Rajeshwari,

2012/5/8 Rajeshwari Shinde <rajeshwari.s@samsung.com>:
> This patchset series adds support to enable USB 2.0 on smdk5250.

Do you have any plan to support USB 3.0 DRD Controller of Exynos5250?

Thanks.

> It corrects sysreg register, usb host, usb otg base address,
> adds power management registers,functions to enable and disable power
> to the USB host controller are added.
>
> This patchset is based on:
> USB: EXYNOS: Add ehci support.patch
>
> Rajeshwari Shinde (6):
>   EXYNOS5: Fix system register structure
>   EXYNOS5: Add structure for PMU registers
>   USB: EXYNOS: Set USB 2.0 HOST Link mode
>   EXYNOS: Add power Enable/Disable for USB-EHCI
>   EXYNOS5: USB: Fix incorrect USB base addresses
>   CONFIG: EXYNOS5: USB: Enable USB 2.0 on smdk5250
>
> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
>
>  arch/arm/cpu/armv7/exynos/power.c         |   22 +
>  arch/arm/cpu/armv7/exynos/system.c        |   22 +
>  arch/arm/include/asm/arch-exynos/cpu.h    |    4 +-
>  arch/arm/include/asm/arch-exynos/power.h  |  626 +++++++++++++++++++++++++++++
>  arch/arm/include/asm/arch-exynos/system.h |    4 +
>  drivers/usb/host/ehci-exynos.c            |    8 +
>  include/configs/smdk5250.h                |    6 +
>  7 files changed, 690 insertions(+), 2 deletions(-)
>
> --
> 1.7.4.4
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot



-- 
- Joonyoung Shim

[U-Boot] [PATCH 0/6 V3] EXYNOS5: USB: Enable USB 2.0 support

[Rajeshwari Birje]

Hi Joonyoung Shim,

Yes, Vivek Gautam is working on the same.
He might let you know the progress of the same.

Regards,
Rajeshwari Shinde.


On Tue, Jul 3, 2012 at 3:24 PM, Joonyoung Shim <dofmind@gmail.com> wrote:
> Hi, Rajeshwari,
>
> 2012/5/8 Rajeshwari Shinde <rajeshwari.s@samsung.com>:
>> This patchset series adds support to enable USB 2.0 on smdk5250.
>
> Do you have any plan to support USB 3.0 DRD Controller of Exynos5250?
>
> Thanks.
>
>> It corrects sysreg register, usb host, usb otg base address,
>> adds power management registers,functions to enable and disable power
>> to the USB host controller are added.
>>
>> This patchset is based on:
>> USB: EXYNOS: Add ehci support.patch
>>
>> Rajeshwari Shinde (6):
>>   EXYNOS5: Fix system register structure
>>   EXYNOS5: Add structure for PMU registers
>>   USB: EXYNOS: Set USB 2.0 HOST Link mode
>>   EXYNOS: Add power Enable/Disable for USB-EHCI
>>   EXYNOS5: USB: Fix incorrect USB base addresses
>>   CONFIG: EXYNOS5: USB: Enable USB 2.0 on smdk5250
>>
>> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
>>
>>  arch/arm/cpu/armv7/exynos/power.c         |   22 +
>>  arch/arm/cpu/armv7/exynos/system.c        |   22 +
>>  arch/arm/include/asm/arch-exynos/cpu.h    |    4 +-
>>  arch/arm/include/asm/arch-exynos/power.h  |  626 +++++++++++++++++++++++++++++
>>  arch/arm/include/asm/arch-exynos/system.h |    4 +
>>  drivers/usb/host/ehci-exynos.c            |    8 +
>>  include/configs/smdk5250.h                |    6 +
>>  7 files changed, 690 insertions(+), 2 deletions(-)
>>
>> --
>> 1.7.4.4
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>
>
>
> --
> - Joonyoung Shim
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] [PATCH 0/6 V3] EXYNOS5: USB: Enable USB 2.0 support

[Vivek Gautam]

Hi  Joonyoung Shim,

We are currently working on this.
We also needed stack support for xhci in U-boot. So both tasks are going on
simultaneously, the stack as well as USB 3.0 DRD controller for exynos5250.
Will soon come with the required support patchesets.

Thanks
Vivek

On Tue, Jul 3, 2012 at 3:41 PM, Rajeshwari Birje <rajeshwari.birje@gmail.com
> wrote:

> Hi Joonyoung Shim,
>
> Yes, Vivek Gautam is working on the same.
> He might let you know the progress of the same.
>
> Regards,
> Rajeshwari Shinde.
>
>
> On Tue, Jul 3, 2012 at 3:24 PM, Joonyoung Shim <dofmind@gmail.com> wrote:
> > Hi, Rajeshwari,
> >
> > 2012/5/8 Rajeshwari Shinde <rajeshwari.s@samsung.com>:
> >> This patchset series adds support to enable USB 2.0 on smdk5250.
> >
> > Do you have any plan to support USB 3.0 DRD Controller of Exynos5250?
> >
> > Thanks.
> >
> >> It corrects sysreg register, usb host, usb otg base address,
> >> adds power management registers,functions to enable and disable power
> >> to the USB host controller are added.
> >>
> >> This patchset is based on:
> >> USB: EXYNOS: Add ehci support.patch
> >>
> >> Rajeshwari Shinde (6):
> >>   EXYNOS5: Fix system register structure
> >>   EXYNOS5: Add structure for PMU registers
> >>   USB: EXYNOS: Set USB 2.0 HOST Link mode
> >>   EXYNOS: Add power Enable/Disable for USB-EHCI
> >>   EXYNOS5: USB: Fix incorrect USB base addresses
> >>   CONFIG: EXYNOS5: USB: Enable USB 2.0 on smdk5250
> >>
> >> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
> >>
> >>  arch/arm/cpu/armv7/exynos/power.c         |   22 +
> >>  arch/arm/cpu/armv7/exynos/system.c        |   22 +
> >>  arch/arm/include/asm/arch-exynos/cpu.h    |    4 +-
> >>  arch/arm/include/asm/arch-exynos/power.h  |  626
> +++++++++++++++++++++++++++++
> >>  arch/arm/include/asm/arch-exynos/system.h |    4 +
> >>  drivers/usb/host/ehci-exynos.c            |    8 +
> >>  include/configs/smdk5250.h                |    6 +
> >>  7 files changed, 690 insertions(+), 2 deletions(-)
> >>
> >> --
> >> 1.7.4.4
> >>
> >> _______________________________________________
> >> U-Boot mailing list
> >> U-Boot at lists.denx.de
> >> http://lists.denx.de/mailman/listinfo/u-boot
> >
> >
> >
> > --
> > - Joonyoung Shim
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de
> > http://lists.denx.de/mailman/listinfo/u-boot
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>