[U-Boot] [PATCH 5/9] ARM: add tegra support to arm720t

[Allen Martin <amartin@nvidia.com>]

On Mon, May 14, 2012 at 10:03:24PM -0700, Stephen Warren wrote:
> On 05/10/2012 01:02 AM, Allen Martin wrote:
> > Add support for tegra arm7 boot processor.  This processor is used to
> > power on the Cortex A9 and transfer control to it.
> 
> > +static void enable_cpu_power_rail(void)
> 
> > +	/*
> > +	 * The TI PMU65861C needs a 3.75ms delay between enabling
> > +	 * the power rail and enabling the CPU clock.  This delay
> > +	 * between SM1EN and SM1 is for switching time + the ramp
> > +	 * up of the voltage to the CPU (VDD_CPU from PMU).
> > +	 */
> > +	udelay(3750);
> 
> Not all boards use that PMU. Can this be conditional on a define that
> enables that PMU, or part of the PMU diver or something?

Sounds reasonable, although I think it should be part of a separate
patch.  This code I just moved unmodified from ap20.c in the armv7
tegra2 directory.

> 
> > diff --git a/arch/arm/cpu/arm720t/tegra2/cpu.h b/arch/arm/cpu/arm720t/tegra2/cpu.h
> 
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> 
> Is this new code you just wrote? If so, shouldn't it be GPL v2 not GPL v2+?

Again I just moved it unmodified (copyright and all) from ap20.h.  

-Allen
-- 
nvpublic