From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] U-boot failed
Date: Tue, 5 Jun 2012 22:22:09 +0200 [thread overview]
Message-ID: <201206052222.09234.marex@denx.de> (raw)
In-Reply-To: <CA+Lp9L8VtYVB0qaWGx1PpN2ionjgWzDisAvQnvnctk7PN1bbVg@mail.gmail.com>
Dear Zeyad A,
> Hello,
>
> Please help me to configure u-boot in my NC600 board.
What's this board? Is it supported mainline? What CPU does it have, what version
of uboot etc?
> I have reached near
> to u-boot, but the kernel is not booting. After the kernel image upload via
> serial boot mode it is giving no response.
Kernel or uboot? Maybe your xyzmodem uploader doesn't work with uboot? Minicom
worked for me.
> If the kernel image upload
> become complete it is not giving any command line in the u-boot as shown in
> the guide.
I see ... what terminal emulator do you use to communicate with uboot? btw.
uploading via tftp over the ethernet is usually much faster.
> The memory is not getting flashed.
Why of course, the loady command downloads data to RAM, you have to flash it via
"nand write" or such command afterwards.
> It is again booting the same
> old windows CE in the nand boot mode.
> Kindly provide me a little support for configuring u-boot.
>
> Thanking you,
> Regards
Best regards,
Marek Vasut
next prev parent reply other threads:[~2012-06-05 20:22 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-05 7:57 [U-Boot] U-boot failed Zeyad A
2012-06-05 20:22 ` Marek Vasut [this message]
[not found] ` <CA+Lp9L_1hJbQ6FKgsW-yhRGT-j9Pzu3Mmu=OMfbOMZCcbog7YA@mail.gmail.com>
2012-06-08 10:42 ` Marek Vasut
[not found] ` <CA+Lp9L-hRu0VkYKhrgb4zvEJov5CpU4wXaf6EUarbUbpi+PXZw@mail.gmail.com>
2012-06-08 13:48 ` Marek Vasut
[not found] ` <CA+Lp9L_HEUPGdSj2Fov8cmBG6MEK7fui_eyMD983sW7wz5UwWA@mail.gmail.com>
2012-06-11 10:44 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201206052222.09234.marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox