[U-Boot] [PATCH v2 09/10] tegra20: Remove CPU init code from tegra20 u-boot

[Allen Martin <amartin@nvidia.com>]

On Wed, Jun 06, 2012 at 09:51:09AM -0700, Stephen Warren wrote:
> On 06/05/2012 03:20 PM, Allen Martin wrote:
> > This code is now included in the tegra20 SPL
> 
> > @@ -323,34 +91,10 @@ void init_pmc_scratch(void)
> >  
> >  	/* ODMDATA is for kernel use to determine RAM size, LP config, etc. */
> >  	writel(CONFIG_SYS_BOARD_ODMDATA, &pmc->pmc_scratch20);
> > -
> > -#ifdef CONFIG_TEGRA2_LP0
> > -	/* save Sdram params to PMC 2, 4, and 24 for WB0 */
> > -	warmboot_save_sdram_params();
> > -#endif
> >  }
> 
> Is that change intended, or was it a rebase mistake?
> 
> > diff --git a/arch/arm/cpu/tegra20-common/board.c b/arch/arm/cpu/tegra20-common/board.c
> 
> > @@ -69,6 +68,11 @@ int dram_init(void)
> >  {
> >  	/* We do not initialise DRAM here. We just query the size */
> >  	gd->ram_size = query_sdram_size();
> > +
> > +#ifdef CONFIG_TEGRA2_LP0
> > +	/* save Sdram params to PMC 2, 4, and 24 for WB0 */
> > +	warmboot_save_sdram_params();
> > +#endif
> 
> Hmmm. That's more than just removing the code that's now in the AVP
> directory. Separate patch? The patch description also doesn't say why
> this change is necessary.

This code was added since v1 of the patch series, and I had to move it
because when I fixed it so we could use the normal lowlevel_init it
gets called before the devicetree is initialized.

I rolled it into this patch, but you're probably right, it would make
more sense to be in it's own patch with a proper description.

-Allen
-- 
nvpublic