From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Mon, 18 Jun 2012 20:31:34 +0200 Subject: [U-Boot] [PATCH v3] doc: README.mx28_common: Add missing entry into Contents In-Reply-To: <1340034709-10635-1-git-send-email-fabio.estevam@freescale.com> References: <1340034709-10635-1-git-send-email-fabio.estevam@freescale.com> Message-ID: <201206182031.34805.marex@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Fabio Estevam, > commit 419ea2d84 (mx28: Split the README into a common part and a m28 > specific part) missed an entry in the Contents section that was part of > the original file. > > Add the missing entry for completeness. > > Signed-off-by: Fabio Estevam Please add my evil Acked-by: Marek Vasut > --- > Changes since v2: > - Use 'into NAND' also in the middle of text rather than only in the > Content section Change since v1: > - Fix completion->completeness , for->into > doc/README.mx28_common | 5 +++-- > 1 files changed, 3 insertions(+), 2 deletions(-) > > diff --git a/doc/README.mx28_common b/doc/README.mx28_common > index 448d221..f73978d 100644 > --- a/doc/README.mx28_common > +++ b/doc/README.mx28_common > @@ -19,6 +19,7 @@ Contents > 1) Prerequisites > 2) Compiling U-Boot for a MX28 based board > 3) Installation of U-Boot for a MX28 based board to SD card > +4) Installation of U-Boot into NAND flash > > 1) Prerequisites > ---------------- > @@ -146,8 +147,8 @@ NOTE: If the user needs to adjust the start sector, the > "mxsboot" tool contains a "-p" switch for that purpose. The "-p" switch > takes the sector number as an argument. > > -4) Installation of U-Boot for NAND flash > ------------------------------------------------ > +4) Installation of U-Boot into NAND flash > +----------------------------------------- > > To boot a MX28 based board from NAND, set the boot mode DIP switches > according to i.MX28 manual chapter 12.2.1 (Table 12-2), PORT=GPMI, NAND > 1.8 V. Best regards, Marek Vasut