[U-Boot] [PATCH 1/2] KW: Move the memory register definitions into kirkwood.h

[Marek Vasut <marex@denx.de>]

Dear Gerlando Falauto,

> Dear Maruk,
> 
> I am currently trying to address the exact same issue (SDRAM size
> detection and fixup).
> My idea was however (as opposed to moving register definition as you
> did), to add a fixup function to dram.c, say:
> 
> /*
>   * kw_sdram_bs - writes SDRAM Bank size
>   */
> void kw_sdram_bs_set(enum memory_bank bank, u32 size)
> {
> 	/* Read current register value */
> 	u32 reg = readl(KW_REG_CPUCS_WIN_SZ(bank));
> 
> 	printf("Current value: %x\n", reg);
> 	/* Clear window size */
> 	reg &= ~KW_REG_CPUCS_WIN_SIZE(0xFF);
> 
> 	/* Set new window size */
> 	reg |= KW_REG_CPUCS_WIN_SIZE((size - 1) >> 24);
> 
> 	printf("Writing: %x\n", reg);
> 	writel(reg, KW_REG_CPUCS_WIN_SZ(bank));
> }
> 
> which would then be called to fix the window size according to the total
> memory size as reported by get_ram_size().

Read up at [1].

http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/133991

> What do you think?
> 
> Thank you,
> Gerlando

Best regards,
Marek Vasut