[U-Boot] [PATCH V3 2/2] Kirkwood: Add support for Ka-Ro TK71

[Marek Vasut <marex@denx.de>]

Dear Prafulla Wadaskar,

> > -----Original Message-----
> > From: Marek Vasut [mailto:marex at denx.de]
> > Sent: 03 July 2012 17:58
> > To: u-boot at lists.denx.de
> > Cc: Marek Vasut; Prafulla Wadaskar; Wolfgang Denk
> > Subject: [PATCH V3 2/2] Kirkwood: Add support for Ka-Ro TK71
> > 
> > Signed-off-by: Marek Vasut <marex@denx.de>
> > Cc: Prafulla Wadaskar <prafulla@marvell.com>
> > Cc: Wolfgang Denk <wd@denx.de>
> 
> ...snip...
> 
> > diff --git a/board/karo/tk71/tk71.c b/board/karo/tk71/tk71.c
> > new file mode 100644
> > index 0000000..50b563e
> > --- /dev/null
> > +++ b/board/karo/tk71/tk71.c
> > @@ -0,0 +1,174 @@
> > +/*
> > + * Copyright (C) 2012 Marek Vasut <marex@denx.de>
> > + * on behalf of DENX Software Engineering GmbH
> > + *
> > + * See file CREDITS for list of people who contributed to this
> > + * project.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> > + * MA 02110-1301 USA
> > + */
> > +
> > +#include <common.h>
> > +#include <miiphy.h>
> > +#include <asm/arch/cpu.h>
> > +#include <asm/arch/kirkwood.h>
> > +#include <asm/arch/mpp.h>
> > +#include <asm/io.h>
> > +
> > +DECLARE_GLOBAL_DATA_PTR;
> > +
> > +#define TK71_OE_LOW			(~0)
> > +#define TK71_OE_HIGH			(~0)
> > +#define TK71_OE_VAL_LOW			(0)
> > +#define TK71_OE_VAL_HIGH		(0)
> > +
> > +int board_early_init_f(void)
> > +{
> > +	unsigned long size = get_ram_size(PHYS_SDRAM_1,
> > PHYS_SDRAM_1_SIZE);
> > +
> > +	/* 256MB module, adjust BAR register */
> > +	if (size == 256 * 1024 * 1024) {
> > +		writel(KW_REG_CPUCS_WIN_ENABLE | KW_REG_CPUCS_WIN_SIZE(0xf),
> > +			KW_REG_CPUCS_WIN_SZ(0));
> > +	}
> 
> Hi Marek
> This is first patch to support this board series, so ideally you don't need
> further tuning of DRAM configuration, if you address it in kwbimage.cfg

What do you mean adress is in kwbimage.cfg ?

> You may think of this approach if you have similar board support in future.
> 
> Please post the patch w/o updating DRAM registers or

How exactly would you support the 256MB variant?

> Let's do it in cleaner way.

I already asked -- did you get anywhere with the cleaner approach? It's not even 
discussed properly yet, let alone implemented.

> macros are NOT encouraged to use for register definition.

What do you mean?

> Regards...
> Prafulla . . .

Best regards,
Marek Vasut