From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Tue, 17 Jul 2012 00:30:22 +0200 Subject: [U-Boot] i.MX dcache issues In-Reply-To: <500269A3.60105@googlemail.com> References: <386549548.1363378.1342303697853.JavaMail.root@advansee.com> <500269A3.60105@googlemail.com> Message-ID: <201207170030.22390.marex@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Dirk Behme, > On 15.07.2012 00:08, Beno?t Th?baudeau wrote: > > On Sat, Jul 14, 2012 at 11:28:03PM +0200, Beno?t Th?baudeau wrote: > >> Shouldn't the MMC/eSDHC drivers flush/invalidate the dcache ranges > >> that they use > >> for DMA operations? Not doing so would explain why stack-allocated > >> buffers are > >> more affected than buffers in unused RAM areas. > > > > That will help: > > http://git.denx.de/?p=u-boot/u-boot-mmc.git;a=commitdiff;h=e576bd90f94080 > > 6b989ffd666552081f17f032c8 > > Are you sure that this patch does really help? > > If I remember correctly (will re-check) we have this patch locally > applied. But even with this patch, we have issues so that we enabled > CONFIG_SYS_DCACHE_OFF, i.e. disabled the dcache. Try using the bounce buffer as I do on mx28. > The issues we observed *without* CONFIG_SYS_DCACHE_OFF: The SD card > was detected as 1-bit only (mmcinfo), while with dcache off it was > used as 4-bit. Debugging this showed that wrong configuration data was > read [1]. Having a fat partition on the card, mmc part/fatls etc > failed, too, with cache enabled. Ad caches -- FEC should be fixed on these platforms, USB might work, MMC should work if you use the bounce buffer. FAT should be fixed, so should be ext2 > Best regards > > Dirk > > [1] > > http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/mmc/mmc.c;h=aebe578ff6f2e > 0228baa3e5d010f6808ea269760;hb=HEAD#l856 > > mmc->scr[0]/scr[1] contained random data > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot Best regards, Marek Vasut