From mboxrd@z Thu Jan  1 00:00:00 1970
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Wed, 18 Jul 2012 17:49:04 +0200
Subject: [U-Boot] [PATCH u-boot-arm/next v2 1/1] OMAP3: igep00x0: add
 SPL support for IGEP-based boards
In-Reply-To: <1342484117-4740-1-git-send-email-javier@dowhile0.org>
References: <1342484117-4740-1-git-send-email-javier@dowhile0.org>
Message-ID: <20120718174904.1d9842a7@skate>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Le Tue, 17 Jul 2012 02:15:17 +0200,
Javier Martinez Canillas <javier@dowhile0.org> a ?crit :

> +void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl,
> +		u32 *mr)
> +{
> +	*mr = MICRON_V_MR_165;
> +#ifdef CONFIG_BOOT_NAND
> +	*mcfg = MICRON_V_MCFG_165(512 << 20);
> +	*ctrla = MICRON_V_ACTIMA_165;
> +	*ctrlb = MICRON_V_ACTIMB_165;
> +	*rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;

I thought the NAND version of the IGEPv2 was capable of using the 200
Mhz timings. At least, from the limited testing I had done, it seemed
to work.

Best regards,

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com