From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] mx28evk kernel does not boot with 2012.07-rc3
Date: Fri, 27 Jul 2012 20:39:03 +0200 [thread overview]
Message-ID: <201207272039.03204.marex@denx.de> (raw)
In-Reply-To: <CAOMZO5C5CdtDuybG2eN4Sj4c5mPbsFeoSwjT_RrL8Lnkx7incw@mail.gmail.com>
Dear Fabio Estevam,
> Hi,
>
> I have just tried the latest U-boot and I am getting the following
> when trying to load today's linux-next:
Noooohoooooooooo! :'-C
Wakizashi, here I come ...
> U-Boot 2012.07-rc3 (Jul 27 2012 - 14:45:19)
>
> Freescale i.MX28 family at 454 MHz
> BOOT: SSP SD/MMC #0, 3V3
> I2C: ready
> DRAM: 128 MiB
> MMC: MXS MMC: 0
> In: serial
> Out: serial
> Err: serial
> Net: FEC0, FEC1
> Hit any key to stop autoboot: 0
> BOOTP broadcast 1
> BOOTP broadcast 2
> DHCP client bound to address 10.29.244.22
> Using FEC0 device
> TFTP from server 10.29.240.146; our IP address is 10.29.244.22
> Filename 'uImage'.
> Load address: 0x42000000
> Loading: ## Warning: gatewayip needed but not set
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> ####
> done
> Bytes transferred = 3343968 (330660 hex)
> ## Booting kernel from Legacy Image at 42000000 ...
> Image Name: Linux-3.5.0-next-20120727+
> Created: 2012-07-27 17:27:30 UTC
> Image Type: ARM Linux Kernel Image (uncompressed)
> Data Size: 3343904 Bytes = 3.2 MiB
> Load Address: 80008000
> Entry Point: 80008000
> Verifying Checksum ... OK
> Loading Kernel Image ... data abort
> pc : [<47fa74f0>] lr : [<47f86f44>]
> sp : 47b80ca8 ip : 80338620 fp : 00000000
> r10: 42330660 r9 : 42000040 r8 : 47b80f68
> r7 : 42000000 r6 : 00000000 r5 : 47b80d1c r4 : 00000000
> r3 : ffffffff r2 : 0033061f r1 : 42330660 r0 : 80008000
> Flags: nzCv IRQs off FIQs off Mode SVC_32
> Resetting CPU ...
>
> resetting ...
>
>
> If I use the latest stable kernel I get:
>
> U-Boot 2012.07-rc3 (Jul 27 2012 - 14:45:19)
>
> Freescale i.MX28 family at 454 MHz
> BOOT: SSP SD/MMC #0, 3V3
> I2C: ready
> DRAM: 128 MiB
> MMC: MXS MMC: 0
> In: serial
> Out: serial
> Err: serial
> Net: FEC0, FEC1
> Hit any key to stop autoboot: 0
> BOOTP broadcast 1
> BOOTP broadcast 2
> DHCP client bound to address 10.29.244.22
> Using FEC0 device
> TFTP from server 10.29.240.146; our IP address is 10.29.244.22
> Filename 'uImage'.
> Load address: 0x42000000
> Loading: ## Warning: gatewayip needed but not set
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> ###################################
> done
> Bytes transferred = 3170352 (306030 hex)
> ## Booting kernel from Legacy Image at 42000000 ...
> Image Name: Linux-3.4.6
> Created: 2012-07-26 23:30:59 UTC
> Image Type: ARM Linux Kernel Image (uncompressed)
> Data Size: 3170288 Bytes = 3 MiB
> Load Address: 90008000
> Entry Point: 90008000
> Verifying Checksum ... OK
> Loading Kernel Image ...
>
> Is there any patch missing or any ideas?
I'm stuck at 20120723 for a bit ... I'll need to resync. Do you suspect uboot
issue or kernel bug?
> Thanks,
>
> Fabio Estevam
Best regards,
Marek Vasut
next prev parent reply other threads:[~2012-07-27 18:39 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-27 18:14 [U-Boot] mx28evk kernel does not boot with 2012.07-rc3 Fabio Estevam
2012-07-27 18:39 ` Marek Vasut [this message]
2012-07-27 18:44 ` Fabio Estevam
2012-07-27 19:11 ` Marek Vasut
2012-07-27 19:14 ` Fabio Estevam
2012-07-27 19:43 ` Wolfgang Denk
2012-07-28 20:21 ` Fabio Estevam
2012-07-28 20:28 ` Wolfgang Denk
2012-07-27 23:08 ` Marek Vasut
2012-07-27 23:20 ` Marek Vasut
2012-07-28 20:12 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201207272039.03204.marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox