* [U-Boot] mx28evk kernel does not boot with 2012.07-rc3
@ 2012-07-27 18:14 Fabio Estevam
2012-07-27 18:39 ` Marek Vasut
` (3 more replies)
0 siblings, 4 replies; 11+ messages in thread
From: Fabio Estevam @ 2012-07-27 18:14 UTC (permalink / raw)
To: u-boot
Hi,
I have just tried the latest U-boot and I am getting the following
when trying to load today's linux-next:
U-Boot 2012.07-rc3 (Jul 27 2012 - 14:45:19)
Freescale i.MX28 family at 454 MHz
BOOT: SSP SD/MMC #0, 3V3
I2C: ready
DRAM: 128 MiB
MMC: MXS MMC: 0
In: serial
Out: serial
Err: serial
Net: FEC0, FEC1
Hit any key to stop autoboot: 0
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 10.29.244.22
Using FEC0 device
TFTP from server 10.29.240.146; our IP address is 10.29.244.22
Filename 'uImage'.
Load address: 0x42000000
Loading: ## Warning: gatewayip needed but not set
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
####
done
Bytes transferred = 3343968 (330660 hex)
## Booting kernel from Legacy Image at 42000000 ...
Image Name: Linux-3.5.0-next-20120727+
Created: 2012-07-27 17:27:30 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3343904 Bytes = 3.2 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... data abort
pc : [<47fa74f0>] lr : [<47f86f44>]
sp : 47b80ca8 ip : 80338620 fp : 00000000
r10: 42330660 r9 : 42000040 r8 : 47b80f68
r7 : 42000000 r6 : 00000000 r5 : 47b80d1c r4 : 00000000
r3 : ffffffff r2 : 0033061f r1 : 42330660 r0 : 80008000
Flags: nzCv IRQs off FIQs off Mode SVC_32
Resetting CPU ...
resetting ...
If I use the latest stable kernel I get:
U-Boot 2012.07-rc3 (Jul 27 2012 - 14:45:19)
Freescale i.MX28 family at 454 MHz
BOOT: SSP SD/MMC #0, 3V3
I2C: ready
DRAM: 128 MiB
MMC: MXS MMC: 0
In: serial
Out: serial
Err: serial
Net: FEC0, FEC1
Hit any key to stop autoboot: 0
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 10.29.244.22
Using FEC0 device
TFTP from server 10.29.240.146; our IP address is 10.29.244.22
Filename 'uImage'.
Load address: 0x42000000
Loading: ## Warning: gatewayip needed but not set
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
###################################
done
Bytes transferred = 3170352 (306030 hex)
## Booting kernel from Legacy Image at 42000000 ...
Image Name: Linux-3.4.6
Created: 2012-07-26 23:30:59 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3170288 Bytes = 3 MiB
Load Address: 90008000
Entry Point: 90008000
Verifying Checksum ... OK
Loading Kernel Image ...
Is there any patch missing or any ideas?
Thanks,
Fabio Estevam
^ permalink raw reply [flat|nested] 11+ messages in thread* [U-Boot] mx28evk kernel does not boot with 2012.07-rc3
2012-07-27 18:14 [U-Boot] mx28evk kernel does not boot with 2012.07-rc3 Fabio Estevam
@ 2012-07-27 18:39 ` Marek Vasut
2012-07-27 18:44 ` Fabio Estevam
2012-07-27 23:08 ` Marek Vasut
` (2 subsequent siblings)
3 siblings, 1 reply; 11+ messages in thread
From: Marek Vasut @ 2012-07-27 18:39 UTC (permalink / raw)
To: u-boot
Dear Fabio Estevam,
> Hi,
>
> I have just tried the latest U-boot and I am getting the following
> when trying to load today's linux-next:
Noooohoooooooooo! :'-C
Wakizashi, here I come ...
> U-Boot 2012.07-rc3 (Jul 27 2012 - 14:45:19)
>
> Freescale i.MX28 family at 454 MHz
> BOOT: SSP SD/MMC #0, 3V3
> I2C: ready
> DRAM: 128 MiB
> MMC: MXS MMC: 0
> In: serial
> Out: serial
> Err: serial
> Net: FEC0, FEC1
> Hit any key to stop autoboot: 0
> BOOTP broadcast 1
> BOOTP broadcast 2
> DHCP client bound to address 10.29.244.22
> Using FEC0 device
> TFTP from server 10.29.240.146; our IP address is 10.29.244.22
> Filename 'uImage'.
> Load address: 0x42000000
> Loading: ## Warning: gatewayip needed but not set
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> ####
> done
> Bytes transferred = 3343968 (330660 hex)
> ## Booting kernel from Legacy Image at 42000000 ...
> Image Name: Linux-3.5.0-next-20120727+
> Created: 2012-07-27 17:27:30 UTC
> Image Type: ARM Linux Kernel Image (uncompressed)
> Data Size: 3343904 Bytes = 3.2 MiB
> Load Address: 80008000
> Entry Point: 80008000
> Verifying Checksum ... OK
> Loading Kernel Image ... data abort
> pc : [<47fa74f0>] lr : [<47f86f44>]
> sp : 47b80ca8 ip : 80338620 fp : 00000000
> r10: 42330660 r9 : 42000040 r8 : 47b80f68
> r7 : 42000000 r6 : 00000000 r5 : 47b80d1c r4 : 00000000
> r3 : ffffffff r2 : 0033061f r1 : 42330660 r0 : 80008000
> Flags: nzCv IRQs off FIQs off Mode SVC_32
> Resetting CPU ...
>
> resetting ...
>
>
> If I use the latest stable kernel I get:
>
> U-Boot 2012.07-rc3 (Jul 27 2012 - 14:45:19)
>
> Freescale i.MX28 family at 454 MHz
> BOOT: SSP SD/MMC #0, 3V3
> I2C: ready
> DRAM: 128 MiB
> MMC: MXS MMC: 0
> In: serial
> Out: serial
> Err: serial
> Net: FEC0, FEC1
> Hit any key to stop autoboot: 0
> BOOTP broadcast 1
> BOOTP broadcast 2
> DHCP client bound to address 10.29.244.22
> Using FEC0 device
> TFTP from server 10.29.240.146; our IP address is 10.29.244.22
> Filename 'uImage'.
> Load address: 0x42000000
> Loading: ## Warning: gatewayip needed but not set
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> ###################################
> done
> Bytes transferred = 3170352 (306030 hex)
> ## Booting kernel from Legacy Image at 42000000 ...
> Image Name: Linux-3.4.6
> Created: 2012-07-26 23:30:59 UTC
> Image Type: ARM Linux Kernel Image (uncompressed)
> Data Size: 3170288 Bytes = 3 MiB
> Load Address: 90008000
> Entry Point: 90008000
> Verifying Checksum ... OK
> Loading Kernel Image ...
>
> Is there any patch missing or any ideas?
I'm stuck at 20120723 for a bit ... I'll need to resync. Do you suspect uboot
issue or kernel bug?
> Thanks,
>
> Fabio Estevam
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 11+ messages in thread* [U-Boot] mx28evk kernel does not boot with 2012.07-rc3
2012-07-27 18:39 ` Marek Vasut
@ 2012-07-27 18:44 ` Fabio Estevam
2012-07-27 19:11 ` Marek Vasut
0 siblings, 1 reply; 11+ messages in thread
From: Fabio Estevam @ 2012-07-27 18:44 UTC (permalink / raw)
To: u-boot
Hi Marek,
On Fri, Jul 27, 2012 at 3:39 PM, Marek Vasut <marex@denx.de> wrote:
> I'm stuck at 20120723 for a bit ... I'll need to resync. Do you suspect uboot
> issue or kernel bug?
Looks like a U-boot issue, as even the kernel from linux-stable is not
booting with 2012.07-rc3
Regards,
Fabio Estevam
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] mx28evk kernel does not boot with 2012.07-rc3
2012-07-27 18:44 ` Fabio Estevam
@ 2012-07-27 19:11 ` Marek Vasut
2012-07-27 19:14 ` Fabio Estevam
0 siblings, 1 reply; 11+ messages in thread
From: Marek Vasut @ 2012-07-27 19:11 UTC (permalink / raw)
To: u-boot
Dear Fabio Estevam,
> Hi Marek,
>
> On Fri, Jul 27, 2012 at 3:39 PM, Marek Vasut <marex@denx.de> wrote:
> > I'm stuck at 20120723 for a bit ... I'll need to resync. Do you suspect
> > uboot issue or kernel bug?
>
> Looks like a U-boot issue, as even the kernel from linux-stable is not
> booting with 2012.07-rc3
I see, we need to bisect this then. Can you please take care of it? Ping me via
jabber/googlecrap once you have time to poke into this.
> Regards,
>
> Fabio Estevam
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] mx28evk kernel does not boot with 2012.07-rc3
2012-07-27 19:11 ` Marek Vasut
@ 2012-07-27 19:14 ` Fabio Estevam
2012-07-27 19:43 ` Wolfgang Denk
0 siblings, 1 reply; 11+ messages in thread
From: Fabio Estevam @ 2012-07-27 19:14 UTC (permalink / raw)
To: u-boot
Hi Marek,
On Fri, Jul 27, 2012 at 4:11 PM, Marek Vasut <marex@denx.de> wrote:
> I see, we need to bisect this then. Can you please take care of it? Ping me via
> jabber/googlecrap once you have time to poke into this.
Yes, I will bisect it and will let you know. Hopefully I will be able
to work on this sometime during the weekend, otherwise I will do it on
Monday.
Regards,
Fabio Estevam
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] mx28evk kernel does not boot with 2012.07-rc3
2012-07-27 19:14 ` Fabio Estevam
@ 2012-07-27 19:43 ` Wolfgang Denk
2012-07-28 20:21 ` Fabio Estevam
0 siblings, 1 reply; 11+ messages in thread
From: Wolfgang Denk @ 2012-07-27 19:43 UTC (permalink / raw)
To: u-boot
Dear Fabio Estevam,
In message <CAOMZO5BNZH3QFr-n0ca5TCg+PXFc8UQwFnPGMKYY7_mNea6uNg@mail.gmail.com> you wrote:
>
> > I see, we need to bisect this then. Can you please take care of it? Ping me via
> > jabber/googlecrap once you have time to poke into this.
>
> Yes, I will bisect it and will let you know. Hopefully I will be able
> to work on this sometime during the weekend, otherwise I will do it on
> Monday.
I understand we put the release on hold until I hear from you / see a
patch / pull request ?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It is clear that the individual who persecutes a man, his brother,
because he is not of the same opinion, is a monster. - Voltaire
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] mx28evk kernel does not boot with 2012.07-rc3
2012-07-27 19:43 ` Wolfgang Denk
@ 2012-07-28 20:21 ` Fabio Estevam
2012-07-28 20:28 ` Wolfgang Denk
0 siblings, 1 reply; 11+ messages in thread
From: Fabio Estevam @ 2012-07-28 20:21 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
On Fri, Jul 27, 2012 at 4:43 PM, Wolfgang Denk <wd@denx.de> wrote:
> I understand we put the release on hold until I hear from you / see a
> patch / pull request ?
Please go ahead with the release. It was an operator error from my
side. 2012.07-rc3 boots the kernel correctly on mx28evk.
Thanks,
Fabio Estevam
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] mx28evk kernel does not boot with 2012.07-rc3
2012-07-28 20:21 ` Fabio Estevam
@ 2012-07-28 20:28 ` Wolfgang Denk
0 siblings, 0 replies; 11+ messages in thread
From: Wolfgang Denk @ 2012-07-28 20:28 UTC (permalink / raw)
To: u-boot
Dear Fabio,
In message <CAOMZO5CAHcApwv0gmRyO1fDeauwos7vYQLfVgSs4U8DJK88FDQ@mail.gmail.com> you wrote:
>
> > I understand we put the release on hold until I hear from you / see a
> > patch / pull request ?
>
> Please go ahead with the release. It was an operator error from my
> side. 2012.07-rc3 boots the kernel correctly on mx28evk.
Thanks for the feedback!
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
f u cn rd ths, u cn gt a gd jb n cmptr prgrmmng.
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] mx28evk kernel does not boot with 2012.07-rc3
2012-07-27 18:14 [U-Boot] mx28evk kernel does not boot with 2012.07-rc3 Fabio Estevam
2012-07-27 18:39 ` Marek Vasut
@ 2012-07-27 23:08 ` Marek Vasut
2012-07-27 23:20 ` Marek Vasut
2012-07-28 20:12 ` Fabio Estevam
3 siblings, 0 replies; 11+ messages in thread
From: Marek Vasut @ 2012-07-27 23:08 UTC (permalink / raw)
To: u-boot
Dear Fabio Estevam,
> Hi,
>
> I have just tried the latest U-boot and I am getting the following
> when trying to load today's linux-next:
>
> U-Boot 2012.07-rc3 (Jul 27 2012 - 14:45:19)
>
> Freescale i.MX28 family at 454 MHz
> BOOT: SSP SD/MMC #0, 3V3
> I2C: ready
> DRAM: 128 MiB
> MMC: MXS MMC: 0
> In: serial
> Out: serial
> Err: serial
> Net: FEC0, FEC1
> Hit any key to stop autoboot: 0
> BOOTP broadcast 1
> BOOTP broadcast 2
> DHCP client bound to address 10.29.244.22
> Using FEC0 device
> TFTP from server 10.29.240.146; our IP address is 10.29.244.22
> Filename 'uImage'.
> Load address: 0x42000000
> Loading: ## Warning: gatewayip needed but not set
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> ####
-rc1 WFM
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] mx28evk kernel does not boot with 2012.07-rc3
2012-07-27 18:14 [U-Boot] mx28evk kernel does not boot with 2012.07-rc3 Fabio Estevam
2012-07-27 18:39 ` Marek Vasut
2012-07-27 23:08 ` Marek Vasut
@ 2012-07-27 23:20 ` Marek Vasut
2012-07-28 20:12 ` Fabio Estevam
3 siblings, 0 replies; 11+ messages in thread
From: Marek Vasut @ 2012-07-27 23:20 UTC (permalink / raw)
To: u-boot
Dear Fabio Estevam,
> Hi,
>
> I have just tried the latest U-boot and I am getting the following
> when trying to load today's linux-next:
[...]
I just tested stock u-boot/master ... (it is annoying and slooooooow, since it
doesn't have a huge pile of patches I plan to push into -next ;-) ) ... but it
works. So it's a problem with the EVK.
U-Boot 2012.07-rc3-00001-gd592802 (Jul 28 2012 - 01:18:16)
Freescale i.MX28 family at 454 MHz
BOOT: SSP SD/MMC #0, 3V3
I2C: ready
DRAM: 128 MiB
NAND: 256 MiB
MMC: MXS MMC: 0
In: serial
Out: serial
Err: serial
Net: FEC0 [PRIME], FEC1
Hit any key to stop autoboot: 0
=>
=> boot
Using FEC0 device
TFTP from server 192.168.1.1; our IP address is 192.168.1.60
Filename 'imx28-m28evk.dtb'.
Load address: 0x41000000
Loading: ####
done
Bytes transferred = 15874 (3e02 hex)
Using FEC0 device
TFTP from server 192.168.1.1; our IP address is 192.168.1.60
Filename 'uImage'.
Load address: 0x42000000
Loading: T #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
##############################
done
Bytes transferred = 3147744 (3007e0 hex)
## Booting kernel from Legacy Image at 42000000 ...
Image Name: Linux-3.5.0-next-20120723-00021-
Created: 2012-07-27 18:21:30 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3147680 Bytes = 3 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Kernel Image ... OK
OK
Loading Device Tree to 47b4e000, end 47b54e01 ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.0-next-20120723-00021-g186fab7-dirty
(root at mashiro) (gcc version 4.7.1 (Debian 4.7.1-3) ) #19022
[ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Freescale i.MX28 (Device Tree), model: DENX M28EVK
btw. now "they" know my ip address range ;-D
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 11+ messages in thread* [U-Boot] mx28evk kernel does not boot with 2012.07-rc3
2012-07-27 18:14 [U-Boot] mx28evk kernel does not boot with 2012.07-rc3 Fabio Estevam
` (2 preceding siblings ...)
2012-07-27 23:20 ` Marek Vasut
@ 2012-07-28 20:12 ` Fabio Estevam
3 siblings, 0 replies; 11+ messages in thread
From: Fabio Estevam @ 2012-07-28 20:12 UTC (permalink / raw)
To: u-boot
On Fri, Jul 27, 2012 at 3:14 PM, Fabio Estevam <festevam@gmail.com> wrote:
> Bytes transferred = 3343968 (330660 hex)
> ## Booting kernel from Legacy Image at 42000000 ...
> Image Name: Linux-3.5.0-next-20120727+
> Created: 2012-07-27 17:27:30 UTC
> Image Type: ARM Linux Kernel Image (uncompressed)
> Data Size: 3343904 Bytes = 3.2 MiB
> Load Address: 80008000
> Entry Point: 80008000
My mistake: I was working with mx31 previously which has this LOADADDR.
Using the correct LOADADDR for mx28 makes the kernel to boot just fine
on 2012.07-rc3.
Sorry for the noise.
Regards,
Fabio Estevam
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2012-07-28 20:28 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-07-27 18:14 [U-Boot] mx28evk kernel does not boot with 2012.07-rc3 Fabio Estevam
2012-07-27 18:39 ` Marek Vasut
2012-07-27 18:44 ` Fabio Estevam
2012-07-27 19:11 ` Marek Vasut
2012-07-27 19:14 ` Fabio Estevam
2012-07-27 19:43 ` Wolfgang Denk
2012-07-28 20:21 ` Fabio Estevam
2012-07-28 20:28 ` Wolfgang Denk
2012-07-27 23:08 ` Marek Vasut
2012-07-27 23:20 ` Marek Vasut
2012-07-28 20:12 ` Fabio Estevam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox