From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] mx28evk kernel does not boot with 2012.07-rc3
Date: Sat, 28 Jul 2012 01:20:50 +0200 [thread overview]
Message-ID: <201207280120.50312.marex@denx.de> (raw)
In-Reply-To: <CAOMZO5C5CdtDuybG2eN4Sj4c5mPbsFeoSwjT_RrL8Lnkx7incw@mail.gmail.com>
Dear Fabio Estevam,
> Hi,
>
> I have just tried the latest U-boot and I am getting the following
> when trying to load today's linux-next:
[...]
I just tested stock u-boot/master ... (it is annoying and slooooooow, since it
doesn't have a huge pile of patches I plan to push into -next ;-) ) ... but it
works. So it's a problem with the EVK.
U-Boot 2012.07-rc3-00001-gd592802 (Jul 28 2012 - 01:18:16)
Freescale i.MX28 family at 454 MHz
BOOT: SSP SD/MMC #0, 3V3
I2C: ready
DRAM: 128 MiB
NAND: 256 MiB
MMC: MXS MMC: 0
In: serial
Out: serial
Err: serial
Net: FEC0 [PRIME], FEC1
Hit any key to stop autoboot: 0
=>
=> boot
Using FEC0 device
TFTP from server 192.168.1.1; our IP address is 192.168.1.60
Filename 'imx28-m28evk.dtb'.
Load address: 0x41000000
Loading: ####
done
Bytes transferred = 15874 (3e02 hex)
Using FEC0 device
TFTP from server 192.168.1.1; our IP address is 192.168.1.60
Filename 'uImage'.
Load address: 0x42000000
Loading: T #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
##############################
done
Bytes transferred = 3147744 (3007e0 hex)
## Booting kernel from Legacy Image at 42000000 ...
Image Name: Linux-3.5.0-next-20120723-00021-
Created: 2012-07-27 18:21:30 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3147680 Bytes = 3 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Kernel Image ... OK
OK
Loading Device Tree to 47b4e000, end 47b54e01 ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.0-next-20120723-00021-g186fab7-dirty
(root at mashiro) (gcc version 4.7.1 (Debian 4.7.1-3) ) #19022
[ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Freescale i.MX28 (Device Tree), model: DENX M28EVK
btw. now "they" know my ip address range ;-D
Best regards,
Marek Vasut
next prev parent reply other threads:[~2012-07-27 23:20 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-27 18:14 [U-Boot] mx28evk kernel does not boot with 2012.07-rc3 Fabio Estevam
2012-07-27 18:39 ` Marek Vasut
2012-07-27 18:44 ` Fabio Estevam
2012-07-27 19:11 ` Marek Vasut
2012-07-27 19:14 ` Fabio Estevam
2012-07-27 19:43 ` Wolfgang Denk
2012-07-28 20:21 ` Fabio Estevam
2012-07-28 20:28 ` Wolfgang Denk
2012-07-27 23:08 ` Marek Vasut
2012-07-27 23:20 ` Marek Vasut [this message]
2012-07-28 20:12 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201207280120.50312.marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox