* [U-Boot] [PATCH] integrator: break out common config
@ 2012-05-22 20:53 Linus Walleij
2012-06-13 13:37 ` Linus Walleij
0 siblings, 1 reply; 6+ messages in thread
From: Linus Walleij @ 2012-05-22 20:53 UTC (permalink / raw)
To: u-boot
The configuration that is common for all Integrator boards may
just as well be stored in a common include file as per pattern
from other boards. This eases maintenance quite a bit.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
include/configs/integrator-common.h | 114 +++++++++++++++++++++++++++++++
include/configs/integratorap.h | 61 +----------------
include/configs/integratorcp.h | 126 ++---------------------------------
3 files changed, 122 insertions(+), 179 deletions(-)
create mode 100644 include/configs/integrator-common.h
diff --git a/include/configs/integrator-common.h b/include/configs/integrator-common.h
new file mode 100644
index 0000000..0ae4312
--- /dev/null
+++ b/include/configs/integrator-common.h
@@ -0,0 +1,114 @@
+/*
+ * (C) Copyright 2012
+ * Linaro
+ * Linus Walleij <linus.walleij@linaro.org>
+ * Common ARM Integrator configuration settings
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define CONFIG_INTEGRATOR
+
+#define CONFIG_SYS_TEXT_BASE 0x01000000
+#define CONFIG_SYS_MEMTEST_START 0x100000
+#define CONFIG_SYS_MEMTEST_END 0x10000000
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_TIMERBASE 0x13000100 /* Timer1 */
+#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "# "
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size*/
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) /* Size of malloc() pool */
+
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_MISC_INIT_R /* call misc_init_r during start up */
+
+/*
+ * There are various dependencies on the core module (CM) fitted
+ * Users should refer to their CM user guide
+ */
+#include "armcoremodule.h"
+
+/*
+ * Initialize and remap the core module, use SPD to detect memory size
+ * If CONFIG_SKIP_LOWLEVEL_INIT is not defined &
+ * the core module has a CM_INIT register
+ * then the U-Boot initialisation code will
+ * e.g. ARM Boot Monitor or pre-loader is repeated once
+ * (to re-initialise any existing CM_INIT settings to safe values).
+ *
+ * This is usually not the desired behaviour since the platform
+ * will either reboot into the ARM monitor (or pre-loader)
+ * or continuously cycle thru it without U-Boot running,
+ * depending upon the setting of Integrator/CP switch S2-4.
+ *
+ * However it may be needed if Integrator/CP switch S2-1
+ * is set OFF to boot direct into U-Boot.
+ * In that case comment out the line below.
+ */
+#define CONFIG_CM_INIT
+#define CONFIG_CM_REMAP
+#define CONFIG_CM_SPD_DETECT
+
+/*
+ * The ARM boot monitor initializes the board.
+ * However, the default U-Boot code also performs the initialization.
+ * If desired, this can be prevented by defining SKIP_LOWLEVEL_INIT
+ * - see documentation supplied with board for details of how to choose the
+ * image to run at reset/power up
+ * e.g. whether the ARM Boot Monitor runs before U-Boot
+ */
+/* #define CONFIG_SKIP_LOWLEVEL_INIT */
+
+/*
+ * The ARM boot monitor does not relocate U-Boot.
+ * However, the default U-Boot code performs the relocation check,
+ * and may relocate the code if the memory map is changed.
+ * If necessary this can be prevented by defining SKIP_RELOCATE_UBOOT
+ */
+/* #define SKIP_CONFIG_RELOCATE_UBOOT */
+
+
+/*
+ * Stack sizes
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
+#endif
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_SIZE PHYS_SDRAM_1_SIZE
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET
diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h
index 0a704cb..c94fa58 100644
--- a/include/configs/integratorap.h
+++ b/include/configs/integratorap.h
@@ -31,32 +31,11 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_INTEGRATOR
+#include "integrator-common.h"
+
+/* Integrator/AP-specific configuration */
#define CONFIG_ARCH_INTEGRATOR
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SYS_TEXT_BASE 0x01000000
-#define CONFIG_SYS_MEMTEST_START 0x100000
-#define CONFIG_SYS_MEMTEST_END 0x10000000
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_HZ_CLOCK 24000000 /* Timer 1 is clocked at 24Mhz */
-#define CONFIG_SYS_TIMERBASE 0x13000100 /* Timer1 */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_CM_INIT 1
-#define CONFIG_CM_REMAP 1
-#define CONFIG_CM_SPD_DETECT
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
/*
* PL010 Configuration
@@ -91,41 +70,7 @@
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT "Integrator-AP # " /* Monitor Command Prompt */
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "# "
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_SIZE PHYS_SDRAM_1_SIZE
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET
#define CONFIG_SYS_FLASH_BASE 0x24000000
diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h
index 57610a6..9bc9e9b 100644
--- a/include/configs/integratorcp.h
+++ b/include/configs/integratorcp.h
@@ -31,32 +31,11 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-/* Integrator-specific configuration */
-#define CONFIG_INTEGRATOR
-#define CONFIG_ARCH_CINTEGRATOR
-#define CONFIG_CM_INIT
-#define CONFIG_CM_REMAP
-#define CONFIG_CM_SPD_DETECT
+#include "integrator-common.h"
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SYS_TEXT_BASE 0x01000000
-#define CONFIG_SYS_MEMTEST_START 0x100000
-#define CONFIG_SYS_MEMTEST_END 0x10000000
-#define CONFIG_SYS_HZ 1000
+/* Integrator CP-specific configuration */
+#define CONFIG_ARCH_CINTEGRATOR
#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer 1 is clocked at 1Mhz */
-#define CONFIG_SYS_TIMERBASE 0x13000100
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
/*
* Hardware drivers
@@ -66,9 +45,7 @@
#define CONFIG_SMC91111_BASE 0xC8000000
#undef CONFIG_SMC91111_EXT_PHY
-/*
- * NS16550 Configuration
- */
+/* PL011 configuration */
#define CONFIG_PL011_SERIAL
#define CONFIG_PL011_CLOCK 14745600
#define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, (void *)CONFIG_SYS_SERIAL1 }
@@ -78,16 +55,6 @@
#define CONFIG_SYS_SERIAL0 0x16000000
#define CONFIG_SYS_SERIAL1 0x17000000
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
/*
* Command line configuration.
*/
@@ -103,43 +70,10 @@
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_PROMPT "Integrator-CP # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size*/
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size*/
-
-#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_SIZE PHYS_SDRAM_1_SIZE
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
+/*
* FLASH and environment organization
-
* Top varies according to amount fitted
* Reserve top 4 blocks of flash
* - ARM Boot Monitor
@@ -148,7 +82,6 @@
* - U-Boot environment
*
* Base is always 0x24000000
-
*/
#define CONFIG_SYS_FLASH_BASE 0x24000000
#define CONFIG_SYS_FLASH_CFI 1
@@ -190,53 +123,4 @@
#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256KB */
#define CONFIG_ENV_SIZE 8192 /* 8KB */
-/*
- * The ARM boot monitor initializes the board.
- * However, the default U-Boot code also performs the initialization.
- * If desired, this can be prevented by defining SKIP_LOWLEVEL_INIT
- * - see documentation supplied with board for details of how to choose the
- * image to run at reset/power up
- * e.g. whether the ARM Boot Monitor runs before U-Boot
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
- */
-
-/*
- * The ARM boot monitor does not relocate U-Boot.
- * However, the default U-Boot code performs the relocation check,
- * and may relocate the code if the memory map is changed.
- * If necessary this can be prevented by defining SKIP_RELOCATE_UBOOT
-
-#define SKIP_CONFIG_RELOCATE_UBOOT
-
- */
-/*-----------------------------------------------------------------------
- * There are various dependencies on the core module (CM) fitted
- * Users should refer to their CM user guide
- * - when porting adjust u-boot/Makefile accordingly
- * to define the necessary CONFIG_ s for the CM involved
- * see e.g. cp_926ejs_config
- */
-
-#include "armcoremodule.h"
-
-/*
- * If CONFIG_SKIP_LOWLEVEL_INIT is not defined &
- * the core module has a CM_INIT register
- * then the U-Boot initialisation code will
- * e.g. ARM Boot Monitor or pre-loader is repeated once
- * (to re-initialise any existing CM_INIT settings to safe values).
- *
- * This is usually not the desired behaviour since the platform
- * will either reboot into the ARM monitor (or pre-loader)
- * or continuously cycle thru it without U-Boot running,
- * depending upon the setting of Integrator/CP switch S2-4.
- *
- * However it may be needed if Integrator/CP switch S2-1
- * is set OFF to boot direct into U-Boot.
- * In that case comment out the line below.
-#undef CONFIG_CM_INIT
- */
-
#endif /* __CONFIG_H */
--
1.7.7.6
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH] integrator: break out common config
2012-05-22 20:53 [U-Boot] [PATCH] integrator: break out common config Linus Walleij
@ 2012-06-13 13:37 ` Linus Walleij
2012-07-23 10:35 ` Linus Walleij
0 siblings, 1 reply; 6+ messages in thread
From: Linus Walleij @ 2012-06-13 13:37 UTC (permalink / raw)
To: u-boot
On Tue, May 22, 2012 at 10:53 PM, Linus Walleij
<linus.walleij@linaro.org> wrote:
> The configuration that is common for all Integrator boards may
> just as well be stored in a common include file as per pattern
> from other boards. This eases maintenance quite a bit.
>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Albert, is this patch OK?
It's available here in patchwork:
http://patchwork.ozlabs.org/patch/160740/
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH] integrator: break out common config
2012-06-13 13:37 ` Linus Walleij
@ 2012-07-23 10:35 ` Linus Walleij
2012-07-29 9:14 ` Albert ARIBAUD
0 siblings, 1 reply; 6+ messages in thread
From: Linus Walleij @ 2012-07-23 10:35 UTC (permalink / raw)
To: u-boot
On Wed, Jun 13, 2012 at 3:37 PM, Linus Walleij <linus.walleij@linaro.org> wrote:
> On Tue, May 22, 2012 at 10:53 PM, Linus Walleij
> <linus.walleij@linaro.org> wrote:
>
>> The configuration that is common for all Integrator boards may
>> just as well be stored in a common include file as per pattern
>> from other boards. This eases maintenance quite a bit.
>>
>> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
>
> Albert, is this patch OK?
>
> It's available here in patchwork:
> http://patchwork.ozlabs.org/patch/160740/
Ping on this, tell me if I'm doing something wrong,
it's been floating for 2 months now...
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH] integrator: break out common config
2012-07-23 10:35 ` Linus Walleij
@ 2012-07-29 9:14 ` Albert ARIBAUD
2012-07-29 9:23 ` Albert ARIBAUD
0 siblings, 1 reply; 6+ messages in thread
From: Albert ARIBAUD @ 2012-07-29 9:14 UTC (permalink / raw)
To: u-boot
Hi Linus,
On Mon, 23 Jul 2012 12:35:05 +0200, Linus Walleij <linus.walleij@linaro.org> wrote:
> On Wed, Jun 13, 2012 at 3:37 PM, Linus Walleij <linus.walleij@linaro.org> wrote:
> > On Tue, May 22, 2012 at 10:53 PM, Linus Walleij
> > <linus.walleij@linaro.org> wrote:
> >
> >> The configuration that is common for all Integrator boards may
> >> just as well be stored in a common include file as per pattern
> >> from other boards. This eases maintenance quite a bit.
> >>
> >> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> >
> > Albert, is this patch OK?
> >
> > It's available here in patchwork:
> > http://patchwork.ozlabs.org/patch/160740/
>
> Ping on this, tell me if I'm doing something wrong,
> it's been floating for 2 months now...
No, it's just that it went below my radar (and then, I was below the radar
myself for the past week).
I'm afraid it will have to go in next now.
> Yours,
> Linus Walleij
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH] integrator: break out common config
2012-07-29 9:14 ` Albert ARIBAUD
@ 2012-07-29 9:23 ` Albert ARIBAUD
2012-08-04 11:38 ` Linus Walleij
0 siblings, 1 reply; 6+ messages in thread
From: Albert ARIBAUD @ 2012-07-29 9:23 UTC (permalink / raw)
To: u-boot
Hi Linus,
On Sun, 29 Jul 2012 11:14:34 +0200, Albert ARIBAUD <albert.u.boot@aribaud.net> wrote:
> Hi Linus,
>
> On Mon, 23 Jul 2012 12:35:05 +0200, Linus Walleij <linus.walleij@linaro.org> wrote:
> > On Wed, Jun 13, 2012 at 3:37 PM, Linus Walleij <linus.walleij@linaro.org> wrote:
> > > On Tue, May 22, 2012 at 10:53 PM, Linus Walleij
> > > <linus.walleij@linaro.org> wrote:
> > >
> > >> The configuration that is common for all Integrator boards may
> > >> just as well be stored in a common include file as per pattern
> > >> from other boards. This eases maintenance quite a bit.
> > >>
> > >> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> > >
> > > Albert, is this patch OK?
> > >
> > > It's available here in patchwork:
> > > http://patchwork.ozlabs.org/patch/160740/
> >
> > Ping on this, tell me if I'm doing something wrong,
> > it's been floating for 2 months now...
>
> No, it's just that it went below my radar (and then, I was below the radar
> myself for the past week).
>
> I'm afraid it will have to go in next now.
Just tried to git am it, seems it does not apply cleanly. Can you rebase and submit
a new version? Sorry for the inconvenience.
> > Yours,
> > Linus Walleij
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH] integrator: break out common config
2012-07-29 9:23 ` Albert ARIBAUD
@ 2012-08-04 11:38 ` Linus Walleij
0 siblings, 0 replies; 6+ messages in thread
From: Linus Walleij @ 2012-08-04 11:38 UTC (permalink / raw)
To: u-boot
On Sun, Jul 29, 2012 at 11:23 AM, Albert ARIBAUD
<albert.u.boot@aribaud.net> wrote:
> On Sun, 29 Jul 2012 11:14:34 +0200, Albert ARIBAUD <albert.u.boot@aribaud.net> wrote:
>> Hi Linus,
>>
>> On Mon, 23 Jul 2012 12:35:05 +0200, Linus Walleij <linus.walleij@linaro.org> wrote:
>> > On Wed, Jun 13, 2012 at 3:37 PM, Linus Walleij <linus.walleij@linaro.org> wrote:
>> > > On Tue, May 22, 2012 at 10:53 PM, Linus Walleij
>> > > <linus.walleij@linaro.org> wrote:
>> > >
>> > >> The configuration that is common for all Integrator boards may
>> > >> just as well be stored in a common include file as per pattern
>> > >> from other boards. This eases maintenance quite a bit.
>> > >>
>> > >> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
>> > >
>> > > Albert, is this patch OK?
>> > >
>> > > It's available here in patchwork:
>> > > http://patchwork.ozlabs.org/patch/160740/
>> >
>> > Ping on this, tell me if I'm doing something wrong,
>> > it's been floating for 2 months now...
>>
>> No, it's just that it went below my radar (and then, I was below the radar
>> myself for the past week).
>>
>> I'm afraid it will have to go in next now.
>
> Just tried to git am it, seems it does not apply cleanly. Can you rebase and submit
> a new version? Sorry for the inconvenience.
Sure no problem, I'll rebase onto your tree then.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2012-08-04 11:38 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-05-22 20:53 [U-Boot] [PATCH] integrator: break out common config Linus Walleij
2012-06-13 13:37 ` Linus Walleij
2012-07-23 10:35 ` Linus Walleij
2012-07-29 9:14 ` Albert ARIBAUD
2012-07-29 9:23 ` Albert ARIBAUD
2012-08-04 11:38 ` Linus Walleij
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox