[U-Boot] [PATCH v1 3/3] mxs: Convert sys_proto.h prefixes to 'mxs'

[Marek Vasut <marex@denx.de>]

Dear Otavio Salvador,

> On Mon, Aug 13, 2012 at 3:11 PM, Marek Vasut <marex@denx.de> wrote:
> > Dear Otavio Salvador,
> > 
> > [...]
> > 
> >> diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
> >> b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c index 84d4a17..ddafddb 100644
> >> --- a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
> >> +++ b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
> >> @@ -82,9 +82,9 @@ uint8_t mxs_get_bootmode_index(void)
> >> 
> >>       bootmode |= (gpio_get_value(MX28_PAD_LCD_D04__GPIO_1_4) ? 1 : 0)
> >>       << 4; bootmode |= (gpio_get_value(MX28_PAD_LCD_D05__GPIO_1_5) ? 1
> >>       : 0) << 5;
> >> 
> >> -     for (i = 0; i < ARRAY_SIZE(mx28_boot_modes); i++) {
> >> -             masked = bootmode & mx28_boot_modes[i].boot_mask;
> >> -             if (masked == mx28_boot_modes[i].boot_pads)
> >> +     for (i = 0; i < ARRAY_SIZE(mxs_boot_modes); i++) {
> >> +             masked = bootmode & mxs_boot_modes[i].boot_mask;
> >> +             if (masked == mxs_boot_modes[i].boot_pads)
> > 
> > mxs_boot_modes? They're different for mx23 and mx28!
> 
> Yes, they're but the structure is the same so we can use same symbol
> and have a different mxs_boot_modes matrix for each.

Unless we want a single image for mx233 and mx28. Oh well ... for now

Acked-by: Marek Vasut <marex@denx.de>

> >>                       break;
> >>       
> >>       }
> > 
> > [...]
> > 
> > Rest seems fine
> > 
> > Best regards,
> > Marek Vasut

Best regards,
Marek Vasut