From: Albert ARIBAUD (U-Boot) <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull u-boot-atmel/master
Date: Tue, 14 Aug 2012 01:11:41 +0200 [thread overview]
Message-ID: <20120814011141.0d45c149@lilith> (raw)
In-Reply-To: <1344378552-3131-1-git-send-email-andreas.devel@googlemail.com>
Hi Andreas,
On Wed, 8 Aug 2012 00:29:12 +0200, Andreas Bie?mann
<andreas.devel@googlemail.com> wrote:
> The following changes since commit
> 8abcd8ab962cd5fb2a4c025e7c7b62a9faf4aa08:
>
> DaVinci DA8xx: fix set_cpu_clk_info() (2012-08-05 22:02:40 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to
> 17cda15fa6fb3ab2433bed951dad5c4ab30d8cbc:
>
> at91: Add support for taskit AT91SAM9G20 boards. (2012-08-07
> 23:47:29 +0200)
>
> ----------------------------------------------------------------
> Andreas Bie?mann (3):
> doc/git-mailrc: update at91 and avr32
> MAINTAINERS: fix entry of Ilko Iliev
> MAINTAINERS: fix Andreas Bie?mann AVR32 entry
>
> Bo Shen (1):
> arm : Atmel : add at91sam9x5ek board support
>
> Markus Hubig (2):
> Enable the EMAC clock in at91_macb_hw_init().
> at91: Add support for taskit AT91SAM9G20 boards.
>
> MAINTAINERS | 23 +-
> arch/arm/cpu/arm926ejs/at91/Makefile | 1 +
> arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 4 +
> arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 232
> ++++++++++++++++ arch/arm/cpu/arm926ejs/at91/clock.c
> | 12 +- arch/arm/include/asm/arch-at91/at91sam9_matrix.h | 2 +
> arch/arm/include/asm/arch-at91/at91sam9x5.h | 170
> ++++++++++++ arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h |
> 91 ++++++ arch/arm/include/asm/arch-at91/hardware.h | 2 +
> board/atmel/at91sam9x5ek/Makefile | 52 ++++
> board/atmel/at91sam9x5ek/at91sam9x5ek.c | 293
> ++++++++++++++++++++
> board/atmel/at91sam9x5ek/config.mk | 1 +
> board/taskit/stamp9g20/Makefile | 53 ++++
> board/taskit/stamp9g20/led.c | 138 +++++++++
> board/taskit/stamp9g20/stamp9g20.c | 191
> +++++++++++++ boards.cfg |
> 3 + doc/git-mailrc | 5 +-
> drivers/net/macb.c | 4 +-
> include/configs/at91sam9x5ek.h | 183
> ++++++++++++ include/configs/stamp9g20.h |
> 266 ++++++++++++++++++ 20 files changed, 1713 insertions(+), 13
> deletions(-) create mode 100644
> arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c create mode 100644
> arch/arm/include/asm/arch-at91/at91sam9x5.h create mode 100644
> arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h create mode 100644
> board/atmel/at91sam9x5ek/Makefile create mode 100644
> board/atmel/at91sam9x5ek/at91sam9x5ek.c create mode 100644
> board/atmel/at91sam9x5ek/config.mk create mode 100644
> board/taskit/stamp9g20/Makefile create mode 100644
> board/taskit/stamp9g20/led.c create mode 100644
> board/taskit/stamp9g20/stamp9g20.c create mode 100644
> include/configs/at91sam9x5ek.h create mode 100644
> include/configs/stamp9g20.h
>
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
next prev parent reply other threads:[~2012-08-13 23:11 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-07 22:29 [U-Boot] Please pull u-boot-atmel/master Andreas Bießmann
2012-08-13 23:11 ` Albert ARIBAUD [this message]
2012-08-13 23:13 ` Albert ARIBAUD
-- strict thread matches above, loose matches on Subject: below --
2012-09-01 14:50 Andreas Bießmann
2012-09-01 15:05 ` Albert ARIBAUD
2012-09-01 16:00 ` Albert ARIBAUD
2012-07-05 10:08 Andreas Bießmann
2012-07-05 11:40 ` Albert ARIBAUD
2012-07-02 22:14 Andreas Bießmann
2012-07-05 8:35 ` Albert ARIBAUD
2012-07-05 9:30 ` Andreas Bießmann
2011-06-20 6:49 Reinhard Meyer
2011-06-20 11:48 ` Albert ARIBAUD
2011-06-20 13:44 ` Wolfgang Denk
2011-06-20 14:06 ` Reinhard Meyer
2011-06-20 16:21 ` Albert ARIBAUD
2011-06-20 19:43 ` Wolfgang Denk
2011-06-20 21:19 ` Albert ARIBAUD
2011-06-20 22:14 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120814011141.0d45c149@lilith \
--to=albert.u.boot@aribaud.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox