From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Sat, 18 Aug 2012 17:20:29 +0200 Subject: [U-Boot] [PATCH 1/2] MX28: config: Allow different target generation in elftosb call In-Reply-To: <1345056696-23876-1-git-send-email-otavio@ossystems.com.br> References: <1345056696-23876-1-git-send-email-otavio@ossystems.com.br> Message-ID: <201208181720.29837.marex@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Otavio Salvador, > The elftosb call needs to use a target param specific for i.MX28. This > patch allow for later addition of i.MX233. > > Signed-off-by: Otavio Salvador > --- > Makefile | 5 ++++- > arch/arm/cpu/arm926ejs/mxs/{u-boot.bd => u-boot.bd.imx28} | 0 > 2 files changed, 4 insertions(+), 1 deletion(-) > rename arch/arm/cpu/arm926ejs/mxs/{u-boot.bd => u-boot.bd.imx28} (100%) > > diff --git a/Makefile b/Makefile > index f6471e2..5f11bb7 100644 > --- a/Makefile > +++ b/Makefile > @@ -452,8 +452,11 @@ $(obj)u-boot.ais: $(obj)spl/u-boot-spl.bin > $(obj)u-boot.bin cat $(obj)spl/u-boot-spl-pad.ais $(obj)u-boot.bin > \ > $(obj)u-boot.ais > > +# Specify the target for use in elftosb call > +ELFTOSB_TARGET-$(CONFIG_MX28) = imx28 > + > $(obj)u-boot.sb: $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin > - elftosb -zdf imx28 -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot.bd \ > + elftosb -zdf $(ELFTOSB_TARGET-y) -c > $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot.bd.$(ELFTOSB_TARGET-y) \ -o > $(obj)u-boot.sb Swap this to u-boot.$(ELFTOSB_TARGET-y).bd ... so the .bd suffix is always at the end. > > # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL. > diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot.bd > b/arch/arm/cpu/arm926ejs/mxs/u-boot.bd.imx28 similarity index 100% > rename from arch/arm/cpu/arm926ejs/mxs/u-boot.bd > rename to arch/arm/cpu/arm926ejs/mxs/u-boot.bd.imx28 Best regards, Marek Vasut