From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marek.vasut@gmail.com>
Date: Tue, 28 Aug 2012 12:18:21 +0200
Subject: [U-Boot] [PATCH v2 1/2] MX28: mx28evk: Align SSP clock speed
In-Reply-To: <1346147802-4720-1-git-send-email-otavio@ossystems.com.br>
References: <1346147802-4720-1-git-send-email-otavio@ossystems.com.br>
Message-ID: <201208281218.22072.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Otavio Salvador,

> Align the SSP clock speed with oscilator to achieve higher transfer
> stability.

This change is still pointless, unless you have user for this!

> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
> ---
> Changes in v2:
> - reword commit log to match the change description done on m28evk.
> 
>  board/freescale/mx28evk/mx28evk.c |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/board/freescale/mx28evk/mx28evk.c
> b/board/freescale/mx28evk/mx28evk.c index 867d3c8..d782aea 100644
> --- a/board/freescale/mx28evk/mx28evk.c
> +++ b/board/freescale/mx28evk/mx28evk.c
> @@ -49,8 +49,8 @@ int board_early_init_f(void)
> 
>  	/* SSP0 clock at 96MHz */
>  	mx28_set_sspclk(MXC_SSPCLK0, 96000, 0);
> -	/* SSP2 clock at 96MHz */
> -	mx28_set_sspclk(MXC_SSPCLK2, 96000, 0);
> +	/* SSP2 clock at 160MHz */
> +	mx28_set_sspclk(MXC_SSPCLK2, 160000, 0);
> 
>  #ifdef	CONFIG_CMD_USB
>  	mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT);

Best regards,
Marek Vasut