From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Tue, 28 Aug 2012 21:36:28 +0200
Subject: [U-Boot] [PATCH] mx28evk: Convert to mxs_adjust_memory_params()
In-Reply-To: <1346182146-1154-1-git-send-email-fabio.estevam@freescale.com>
References: <1346182146-1154-1-git-send-email-fabio.estevam@freescale.com>
Message-ID: <201208282136.28538.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Fabio Estevam,

> Recent conversion from mx28_adjust_memory_params to
> mxs_adjust_memory_params missed to update mx28evk, which caused the board
> not to boot.

Oh of course ... that's an obvious flub. I'm very unhappy about the conversion 
causing such trouble! Please be more careful next time.

> Apply the conversion so that the board can boot again.

Yes,

Acked-by: Marek Vasut <marex@denx.de>

> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
>  board/freescale/mx28evk/iomux.c |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/board/freescale/mx28evk/iomux.c
> b/board/freescale/mx28evk/iomux.c index 16a6d8a..ae6eda3 100644
> --- a/board/freescale/mx28evk/iomux.c
> +++ b/board/freescale/mx28evk/iomux.c
> @@ -173,7 +173,7 @@ const iomux_cfg_t iomux_setup[] = {
>  #define HW_DRAM_CTL29_CONFIG	(CS_MAP << 24 | COLUMN_SIZE << 16 | \
>  					ADDR_PINS << 8 | APREBIT)
> 
> -void mx28_adjust_memory_params(uint32_t *dram_vals)
> +void mxs_adjust_memory_params(uint32_t *dram_vals)
>  {
>  	dram_vals[HW_DRAM_CTL29] = HW_DRAM_CTL29_CONFIG;
>  }

Best regards,
Marek Vasut