From: Marek Vasut <marek.vasut@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [U-BOOT][PATCH] mmc: support the revision check for eMMC4.5
Date: Sat, 1 Sep 2012 08:15:26 +0200 [thread overview]
Message-ID: <201209010815.27149.marek.vasut@gmail.com> (raw)
In-Reply-To: <CAELcNGRRn8hEcKmBKVEHfS6vZvoLBs_S9spdCi+6hKGA6sp6kQ@mail.gmail.com>
Dear Jae hoon Chung,
> Hi,
>
> Anybody think about this patch?
> mmcinfo is produce correctly?
>
> if i miss something, let me know, plz.
Andy?
> Best Regards,
> Jaehoon Chung
>
> 2012/3/27 Jaehoon Chung <jh80.chung@samsung.com>:
> > eMMC card is introduced the eMMC4.5.
> > But now eMMC card is checked up to eMMC4.0.
> > This patch is supported until eMMC4.5
> >
> > Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> > Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> > ---
> > common/cmd_mmc.c | 5 ++++-
> > drivers/mmc/mmc.c | 25 +++++++++++++++++++++++++
> > include/mmc.h | 8 ++++++++
> > 3 files changed, 37 insertions(+), 1 deletions(-)
> >
> > diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
> > index 8f13c22..ff150ca 100644
> > --- a/common/cmd_mmc.c
> > +++ b/common/cmd_mmc.c
> > @@ -106,7 +106,10 @@ static void print_mmcinfo(struct mmc *mmc)
> > printf("Rd Block Len: %d\n", mmc->read_bl_len);
> >
> > printf("%s version %d.%d\n", IS_SD(mmc) ? "SD" : "MMC",
> > - (mmc->version >> 4) & 0xf, mmc->version & 0xf);
> > + (mmc->version >> 4) & 0xf,
> > + (mmc->version & 0xf) == EXT_CSD_REV_1_5 ?
> > + 41 :((mmc->version & 0xf) > EXT_CSD_REV_1_5 ?
> > + (mmc->version & 0xf) - 1 : (mmc->version &
> > 0xf)));
> >
> > printf("High Capacity: %s\n", mmc->high_capacity ? "Yes" : "No");
> > puts("Capacity: ");
> > diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
> > index 49c3349..e035012 100644
> > --- a/drivers/mmc/mmc.c
> > +++ b/drivers/mmc/mmc.c
> > @@ -651,6 +651,31 @@ int mmc_change_freq(struct mmc *mmc)
> > if (err)
> > return err;
> >
> > + switch (ext_csd[EXT_CSD_REV]) {
> > + case EXT_CSD_REV_1_0:
> > + mmc->version |= EXT_CSD_REV_1_0;
> > + break;
> > + case EXT_CSD_REV_1_1:
> > + mmc->version |= EXT_CSD_REV_1_1;
> > + break;
> > + case EXT_CSD_REV_1_2:
> > + mmc->version |= EXT_CSD_REV_1_2;
> > + break;
> > + case EXT_CSD_REV_1_3:
> > + mmc->version |= EXT_CSD_REV_1_3;
> > + break;
> > + case EXT_CSD_REV_1_5:
> > + mmc->version |= EXT_CSD_REV_1_5;
> > + break;
> > + case EXT_CSD_REV_1_6:
> > + mmc->version |= EXT_CSD_REV_1_6;
> > + break;
> > + case EXT_CSD_REV_1_4:
> > + default:
> > + printf("Unknown revision - %x\n", ext_csd[EXT_CSD_REV]);
> > + return 0;
> > + }
> > +
> > /* No high-speed support */
> > if (!ext_csd[EXT_CSD_HS_TIMING])
> > return 0;
> > diff --git a/include/mmc.h b/include/mmc.h
> > index 30c2375..726da99 100644
> > --- a/include/mmc.h
> > +++ b/include/mmc.h
> > @@ -157,6 +157,14 @@
> > #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */
> > #define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */
> >
> > +#define EXT_CSD_REV_1_0 0
> > +#define EXT_CSD_REV_1_1 1
> > +#define EXT_CSD_REV_1_2 2
> > +#define EXT_CSD_REV_1_3 3
> > +#define EXT_CSD_REV_1_4 4
> > +#define EXT_CSD_REV_1_5 5
> > +#define EXT_CSD_REV_1_6 6
> > +
> > /*
> > * EXT_CSD field definitions
> > */
> > --
> > 1.7.4.1
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de
> > http://lists.denx.de/mailman/listinfo/u-boot
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
next prev parent reply other threads:[~2012-09-01 6:15 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-27 7:16 [U-Boot] [U-BOOT][PATCH] mmc: support the revision check for eMMC4.5 Jaehoon Chung
2012-04-02 18:35 ` Jae hoon Chung
2012-09-01 6:15 ` Marek Vasut [this message]
2012-09-03 5:32 ` Jaehoon Chung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201209010815.27149.marek.vasut@gmail.com \
--to=marek.vasut@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox