From: Albert ARIBAUD <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] [GIT PULL] Pull request: u-boot-imx
Date: Sat, 1 Sep 2012 14:57:27 +0200 [thread overview]
Message-ID: <20120901145727.3415693a@lilith> (raw)
In-Reply-To: <503B168C.9090205@denx.de>
Hi Stefano,
On Mon, 27 Aug 2012 08:41:16 +0200, Stefano Babic <sbabic@denx.de>
wrote:
> Hi Albert,
>
> please pull from u-boot-imx, thanks.
>
> The following changes since commit
> 5f50310588e87f2ff501992564d1b05df71419f4:
>
> davinci, c6x: Always use C version of reset code (2012-08-25
> 13:40:03 +0200)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-imx.git master
>
> for you to fetch changes up to
> ff1728c902587c2dc76869a30a32013ef005b84a:
>
> mxs: Convert timeout parameter to 'unsigned int' (2012-08-27
> 08:28:01 +0200)
>
> ----------------------------------------------------------------
> Ashok Kumar Reddy (1):
> mx6qarm2:Use IMX_GPIO_NR macro
>
> Beno?t Th?baudeau (17):
> mxc_spi: Round up clock divider
> mx25: Enable dcache
> mx5: Enable dcache
> mx35: Fix typo on EDIO
> mx3: Fix typo on IPU_CONF_CSI_EN
> mx5/6 timer: Round up tick_to_time() value
> mx5: cosmetic: Clean up lowlevel_init
> mx35: Remove duplicate GPIO3_BASE_ADDR
> mx5/6: Fix cpu_mmc_init() return value
> mx35: Add cpu_mmc_init()
> mx5: Undeclare imx_decode_pll()
> mx35 iomux: Remove unused macro
> mx35: Fix broken pin definitions
> mx35: Remove declaration of non-existing function
> mx35: Move clock enums to clock.h
> mx35: Remove declaration of non-existing function
> mxc: Make gpio_get_value() use PSR
>
> Fabio Estevam (7):
> m28evk: Turn on caches
> apx4devkit: Turn on caches
> mx28evk: Remove unneeded 'undef'
> mxs: Use correct function name to initialize dram
> mx53loco: Use IMX_GPIO_NR macro
> mx51evk: Use IMX_GPIO_NR macro
> mx53ard: Use IMX_GPIO_NR macro
>
> Marek Vasut (7):
> MX28: Drop the cp15 reconfiguration from SPL
> MX28: Shuffle around the power management code
> MX28: DMA: Align the struct mxs_dma_desc
> MX28: DMA: Prolong the DMA timeout
> MX28: SPI: Supercharge the SPI driver
> MX28: m28evk: Align SSP clock speed
> MX28: m28evk: Enable SPI DMA
>
> Matt Sealey (7):
> spi: fix mxc_spi_slave structure allocation to clear memory
> spi: fix mxs_spi_slave structure allocation to clear memory
> mx5: add iomux-mx51.h include
> efikamx: move and rename Efika MX directories and config files
> to prepare for new boards
> efikamx: remove drive strength function and roll its
> functionality into the DCD
> efikamx: configure Smarttop PCBID and LED pads in DCD for
> convenience efikamx: update MAINTAINERS for Genesi Efika MX systems
>
> Otavio Salvador (9):
> mxs: Remove not required explicit iomux-mx28.h include
> mxs: Remove not required include of iomux-mx28.h
> mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h
> mxs: Convert sys_proto.h prefixes to 'mxs'
> MX28: config: Allow different target generation in elftosb call
> MX28: Move "regs-base.h" include after SoC type configuration
> mxs: Replace i.MX233 by i.MX23 on copyright header
> mxs: Only build internal Ethernet controller for i.MX28
> mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'
>
> Stefano Babic (1):
> MX: Set a common gpio.h for all i.MX
>
> Troy Kisky (4):
> iomux: move IOMUX_GPR13_xxx defines
> imx-common/cmd_bmode.c: add imx bmode (bootmode) command
> mx6qsabrelite: add boot_mode support
> mx53evk: add boot_mode support
>
> Vikram Narayanan (1):
> tx25: Use generic gpio_* calls
>
> fabio.estevam at freescale.com (1):
> mxs: Convert timeout parameter to 'unsigned int'
>
> trem (3):
> rtc: add support of mx27 rtc
> gpio: add gpio api support to mx27 (v4)
> imx27lite: update with gpio api change (v4)
>
> MAINTAINERS | 7 +-
> Makefile | 5 +-
> arch/arm/cpu/arm1136/mx35/generic.c | 19 ++-
> arch/arm/cpu/arm1136/mx35/iomux.c | 2 -
> arch/arm/cpu/arm926ejs/mx25/generic.c | 8 +
> arch/arm/cpu/arm926ejs/mx27/generic.c | 11 +-
> arch/arm/cpu/arm926ejs/mxs/mxs.c | 40 ++---
> arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 7 +-
> arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 1 -
> arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 9 +-
> arch/arm/cpu/arm926ejs/mxs/start.S | 42 -----
> arch/arm/cpu/arm926ejs/mxs/timer.c | 2 +-
> .../arm926ejs/mxs/{u-boot.bd => u-boot-imx28.bd} | 0
> arch/arm/cpu/armv7/imx-common/Makefile | 1 +
> arch/arm/cpu/armv7/imx-common/cmd_bmode.c | 119
> ++++++++++++++ arch/arm/cpu/armv7/imx-common/cpu.c
> | 6 +- arch/arm/cpu/armv7/imx-common/timer.c | 2 +-
> arch/arm/cpu/armv7/mx5/lowlevel_init.S | 46 +++---
> arch/arm/cpu/armv7/mx5/soc.c | 39 +++++
> arch/arm/cpu/armv7/mx6/soc.c | 36 +++++
> arch/arm/include/asm/arch-mx25/gpio.h | 17 +-
> arch/arm/include/asm/arch-mx27/gpio.h | 55 +++++++
> arch/arm/include/asm/arch-mx27/imx-regs.h | 33 ++--
> arch/arm/include/asm/arch-mx27/regs-rtc.h | 40 +++++
> arch/arm/include/asm/arch-mx31/gpio.h | 7 +-
> arch/arm/include/asm/arch-mx31/imx-regs.h | 2 +-
> arch/arm/include/asm/arch-mx35/clock.h | 28 +++-
> arch/arm/include/asm/arch-mx35/crm_regs.h | 4 +-
> arch/arm/include/asm/arch-mx35/gpio.h | 12 +-
> arch/arm/include/asm/arch-mx35/imx-regs.h | 29 +---
> arch/arm/include/asm/arch-mx35/mx35_pins.h | 3 -
> arch/arm/include/asm/arch-mx35/sys_proto.h | 1 -
> arch/arm/include/asm/arch-mx5/clock.h | 2 -
> arch/arm/include/asm/arch-mx5/gpio.h | 7 +-
> arch/arm/include/asm/arch-mx5/imx-regs.h | 18 +++
> arch/arm/include/asm/arch-mx5/iomux-mx51.h | 164
> ++++++++++++++++++++
> arch/arm/include/asm/arch-mx6/gpio.h | 7 +-
> arch/arm/include/asm/arch-mx6/imx-regs.h | 23 ++-
> arch/arm/include/asm/arch-mx6/iomux.h | 129
> +++++++++++++++ arch/arm/include/asm/arch-mxs/dma.h
> | 3 +- arch/arm/include/asm/arch-mxs/imx-regs.h | 2 +-
> .../{regs-clkctrl.h => regs-clkctrl-mx28.h} | 0
> arch/arm/include/asm/arch-mxs/sys_proto.h | 24 +--
> arch/arm/include/asm/imx-common/boot_mode.h | 36 +++++
> arch/arm/include/asm/imx-common/gpio.h | 39 +++++
> arch/arm/include/asm/imx-common/iomux-v3.h | 111
> ------------- board/CarMediaLab/flea3/flea3.c |
> 6 +- board/bluegiga/apx4devkit/apx4devkit.c | 4 +-
> board/denx/m28evk/m28evk.c | 6 +-
> board/freescale/mx28evk/mx28evk.c | 2 +-
> board/freescale/mx35pdk/mx35pdk.c | 2 +-
> board/freescale/mx51evk/mx51evk.c | 6 +-
> board/freescale/mx53ard/mx53ard.c | 2 +-
> board/freescale/mx53evk/mx53evk.c | 13 ++
> board/freescale/mx53loco/mx53loco.c | 2 +-
> board/freescale/mx6qarm2/mx6qarm2.c | 4 +-
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 43 +++--
> board/{efikamx => genesi/mx51_efikamx}/Makefile | 0
> .../{efikamx => genesi/mx51_efikamx}/efikamx-usb.c | 2 +-
> board/{efikamx => genesi/mx51_efikamx}/efikamx.c | 77 ---------
> .../mx51_efikamx}/imximage_mx.cfg | 50 +++---
> .../mx51_efikamx}/imximage_sb.cfg | 0
> board/karo/tx25/tx25.c | 25 ++-
> board/logicpd/imx27lite/imx27lite.c | 5 +-
> board/schulercontrol/sc_sps_1/sc_sps_1.c | 2 +-
> board/syteco/zmx25/zmx25.c | 26 ++--
> boards.cfg | 4 +-
> drivers/dma/apbh_dma.c | 6 +-
> drivers/gpio/mxc_gpio.c | 10 +-
> drivers/i2c/mxs_i2c.c | 2 +-
> drivers/mmc/mxsmmc.c | 2 +-
> drivers/mtd/nand/mxs_nand.c | 6 +-
> drivers/rtc/Makefile | 1 +
> drivers/rtc/mx27rtc.c | 83 ++++++++++
> drivers/rtc/mxsrtc.c | 4 +-
> drivers/spi/mxc_spi.c | 6 +-
> drivers/spi/mxs_spi.c | 106
> ++++++++----- drivers/usb/host/ehci-mxs.c |
> 2 +- include/configs/apx4devkit.h | 6 +-
> include/configs/imx27lite-common.h | 5 +
> include/configs/m28evk.h | 11 +-
> include/configs/mx28evk.h | 6 +-
> include/configs/{efikamx.h => mx51_efikamx.h} | 0
> include/configs/mx53evk.h | 3 +
> include/configs/mx6qsabrelite.h | 6 +-
> include/configs/sc_sps_1.h | 4 +-
> 86 files changed, 1163 insertions(+), 585 deletions(-)
> rename arch/arm/cpu/arm926ejs/mxs/{u-boot.bd => u-boot-imx28.bd}
> (100%) create mode 100644 arch/arm/cpu/armv7/imx-common/cmd_bmode.c
> create mode 100644 arch/arm/include/asm/arch-mx27/gpio.h
> create mode 100644 arch/arm/include/asm/arch-mx27/regs-rtc.h
> create mode 100644 arch/arm/include/asm/arch-mx5/iomux-mx51.h
> create mode 100644 arch/arm/include/asm/arch-mx6/iomux.h
> rename arch/arm/include/asm/arch-mxs/{regs-clkctrl.h =>
> regs-clkctrl-mx28.h} (100%)
> create mode 100644 arch/arm/include/asm/imx-common/boot_mode.h
> create mode 100644 arch/arm/include/asm/imx-common/gpio.h
> rename board/{efikamx => genesi/mx51_efikamx}/Makefile (100%)
> rename board/{efikamx => genesi/mx51_efikamx}/efikamx-usb.c (99%)
> rename board/{efikamx => genesi/mx51_efikamx}/efikamx.c (85%)
> rename board/{efikamx => genesi/mx51_efikamx}/imximage_mx.cfg (71%)
> rename board/{efikamx => genesi/mx51_efikamx}/imximage_sb.cfg (100%)
> create mode 100644 drivers/rtc/mx27rtc.c
> rename include/configs/{efikamx.h => mx51_efikamx.h} (100%)
>
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
next prev parent reply other threads:[~2012-09-01 12:57 UTC|newest]
Thread overview: 116+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-27 6:41 [U-Boot] [GIT PULL] Pull request: u-boot-imx Stefano Babic
2012-09-01 12:57 ` Albert ARIBAUD [this message]
-- strict thread matches above, loose matches on Subject: below --
2012-09-28 15:39 Stefano Babic
2012-09-29 9:48 ` Albert ARIBAUD
2012-09-17 13:53 Stefano Babic
2012-09-20 22:46 ` Albert ARIBAUD
2012-08-07 16:00 Stefano Babic
2012-07-02 18:03 Stefano Babic
2012-07-05 8:23 ` Albert ARIBAUD
2012-05-09 16:38 Stefano Babic
2012-05-15 6:24 ` Albert ARIBAUD
2012-04-11 14:22 Stefano Babic
2012-04-16 13:04 ` Albert ARIBAUD
2012-03-08 7:52 Stefano Babic
2012-03-26 20:45 ` Albert ARIBAUD
2012-03-26 21:08 ` Albert ARIBAUD
2012-03-27 7:39 ` Stefano Babic
2012-03-03 11:38 Stefano Babic
2012-03-05 12:37 ` Albert ARIBAUD
2012-02-20 7:10 Stefano Babic
2012-02-20 7:54 ` Albert ARIBAUD
2012-02-12 16:06 Stefano Babic
2012-02-13 8:03 ` Albert ARIBAUD
2012-01-22 13:06 Stefano Babic
2012-02-04 16:57 ` Albert ARIBAUD
2012-02-05 13:32 ` Stefano Babic
2012-01-04 16:57 Stefano Babic
2012-01-04 17:41 ` Fabio Estevam
2012-01-04 17:56 ` Stefano Babic
2012-01-12 22:01 ` Albert ARIBAUD
2011-12-19 7:45 Stefano Babic
2011-12-19 8:39 ` Albert ARIBAUD
2011-12-09 14:34 Stefano Babic
2011-12-09 16:40 ` Albert ARIBAUD
2011-12-05 17:22 Stefano Babic
2011-12-05 17:27 ` Albert ARIBAUD
2011-12-01 16:14 Stefano Babic
2011-12-05 16:57 ` Albert ARIBAUD
2011-12-05 17:19 ` Stefano Babic
2011-11-11 10:40 Stefano Babic
2011-11-15 21:24 ` Albert ARIBAUD
2011-11-04 6:47 Stefano Babic
2011-11-04 21:11 ` Albert ARIBAUD
2011-10-28 12:37 Stefano Babic
2011-10-28 15:20 ` Albert ARIBAUD
2011-10-17 8:05 Stefano Babic
2011-10-18 18:12 ` Albert ARIBAUD
2011-10-19 9:30 ` Stefano Babic
2011-10-19 11:25 ` Albert ARIBAUD
2011-09-08 14:34 Stefano Babic
2011-09-08 14:59 ` Albert ARIBAUD
2011-08-26 14:23 Stefano Babic
2011-08-30 9:18 ` Albert ARIBAUD
2011-08-26 9:31 Stefano Babic
2011-08-26 9:38 ` Stefano Babic
2011-08-12 14:08 Stefano Babic
2011-08-12 17:53 ` Albert ARIBAUD
2011-07-18 12:45 Stefano Babic
2011-07-18 13:38 ` Albert ARIBAUD
2011-07-13 14:25 Stefano Babic
2011-07-14 13:42 ` Albert ARIBAUD
2011-06-30 9:38 Stefano Babic
2011-06-30 10:52 ` Albert ARIBAUD
2011-06-15 9:28 Stefano Babic
2011-06-17 19:24 ` Albert ARIBAUD
2011-06-17 19:37 ` Albert ARIBAUD
2011-06-18 9:59 ` Stefano Babic
2011-06-18 11:11 ` Albert ARIBAUD
2011-06-08 11:36 Stefano Babic
2011-06-08 20:08 ` Albert ARIBAUD
2011-05-20 15:58 Stefano Babic
2011-05-20 18:35 ` Albert ARIBAUD
2011-05-09 11:49 Stefano Babic
2011-05-10 21:55 ` Albert ARIBAUD
2011-05-11 5:50 ` Stefano Babic
2011-05-11 20:56 ` Albert ARIBAUD
2011-05-11 20:58 ` Albert ARIBAUD
2011-04-22 12:50 Stefano Babic
2011-04-05 13:29 Stefano Babic
2011-04-05 17:13 ` Albert ARIBAUD
2011-02-13 9:56 Stefano Babic
2011-02-13 11:25 ` Albert ARIBAUD
2011-02-13 11:57 ` Albert ARIBAUD
2011-02-01 18:13 Stefano Babic
2011-02-01 23:58 ` Albert ARIBAUD
2011-01-21 9:24 Stefano Babic
2011-01-21 17:33 ` Albert ARIBAUD
2011-01-13 6:40 Stefano Babic
2011-01-13 7:20 ` Albert ARIBAUD
2011-01-13 7:23 ` Stefano Babic
2011-01-13 21:30 ` Albert ARIBAUD
2011-01-17 19:10 ` Wolfgang Denk
2011-01-17 19:30 ` Stefano Babic
2010-12-09 10:05 stefano babic
2010-12-09 19:54 ` Wolfgang Denk
2010-10-28 11:25 Stefano Babic
2010-10-29 19:50 ` Wolfgang Denk
2010-10-19 14:09 Stefano Babic
2010-10-19 18:58 ` Wolfgang Denk
2010-10-14 8:42 Stefano Babic
2010-10-17 17:57 ` Wolfgang Denk
2010-10-07 8:28 Stefano Babic
2010-10-11 8:23 ` Wolfgang Denk
[not found] <4BE12AA5.8020605@denx.de>
2010-05-11 15:04 ` Tom Rix
2010-05-05 8:15 Stefano Babic
2010-04-19 13:52 Stefano Babic
2010-04-06 9:38 Stefano Babic
2010-04-18 11:45 ` Tom Rix
2010-03-02 18:45 Stefano Babic
2010-03-04 16:03 ` Tom
2010-03-05 14:54 ` Stefano Babic
2010-03-05 17:24 ` Stefano Babic
2010-03-05 14:00 ` Tom
2010-03-05 14:16 ` Stefano Babic
2010-03-05 14:40 ` Tom
2010-03-05 14:48 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120901145727.3415693a@lilith \
--to=albert.u.boot@aribaud.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox