From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 02/11] S3C24XX: Add core support for Samsung's S3C24XX SoCs
Date: Fri, 14 Sep 2012 11:39:50 -0700 [thread overview]
Message-ID: <20120914183950.GI22028@bill-the-cat> (raw)
In-Reply-To: <1347643742-19966-3-git-send-email-jose.goncalves@inov.pt>
On Fri, Sep 14, 2012 at 06:28:53PM +0100, Jos?? Miguel Gon??alves wrote:
> This patch adds the support for Samsung's S3C24XX SoCs that have an ARM926EJS core.
> Currently it supports S3C2412, S3C2413, S3C2416 and S3C2450.
> Tested on an S3C2416 platform.
[snip]
> +/*
> + * Reset the cpu by setting up the watchdog timer and let him time out.
> + */
> +void reset_cpu(ulong addr)
> +{
> + struct s3c24xx_watchdog *const watchdog = s3c24xx_get_base_watchdog();
> +
> + /* Disable watchdog */
> + writel(0x0000, &watchdog->wtcon);
> +
> + /* Initialize watchdog timer count register */
> + writel(0x0001, &watchdog->wtcnt);
> +
> + /* Enable watchdog timer; assert reset at timer timeout */
> + writel(WTCON_RSTEN | WTCON_ENABLE, &watchdog->wtcon);
> +
> + while (1)
> + /* loop forever and wait for reset to happen */;
> +}
As we're dealing with in another series, this should be __noreturn (from
<linux/compiler.h>).
Also, please audit your new headers to make sure you aren't adding
structs / defines / etc that you aren't using by the end of the series,
and make sure to note in the cover letter that you are checkpatch clean
or explain away the false positives. Thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120914/936e5684/attachment.pgp>
next prev parent reply other threads:[~2012-09-14 18:39 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-14 17:28 [U-Boot] [PATCH v2 00/11] S3C24XX: Add support to MINI2416 board José Miguel Gonçalves
2012-09-14 17:28 ` [U-Boot] [PATCH v2 01/11] ARM: fix relocation on ARM926EJS José Miguel Gonçalves
2012-09-15 18:03 ` Marek Vasut
2012-09-16 9:45 ` José Miguel Gonçalves
2012-09-16 10:06 ` Marek Vasut
2012-09-16 10:16 ` José Miguel Gonçalves
2012-09-16 15:36 ` Marek Vasut
2012-09-16 16:26 ` José Miguel Gonçalves
2012-09-16 17:17 ` Marek Vasut
2012-09-17 6:28 ` Christian Riesch
2012-09-17 8:34 ` José Miguel Gonçalves
2012-09-17 9:03 ` Christian Riesch
2012-09-17 9:20 ` José Miguel Gonçalves
2012-09-17 17:18 ` Tom Rini
2012-09-17 17:23 ` Scott Wood
2012-09-17 17:32 ` Tom Rini
2012-09-17 17:26 ` Marek Vasut
2012-09-17 17:35 ` Tom Rini
2012-09-17 17:48 ` Marek Vasut
2012-09-17 18:00 ` Tom Rini
2012-09-17 17:27 ` José Miguel Gonçalves
2012-10-04 14:24 ` Albert ARIBAUD
2012-09-14 17:28 ` [U-Boot] [PATCH v2 02/11] S3C24XX: Add core support for Samsung's S3C24XX SoCs José Miguel Gonçalves
2012-09-14 18:03 ` Marek Vasut
[not found] ` <505375E3.6050005@inov.pt>
2012-09-14 18:25 ` Marek Vasut
2012-09-14 19:01 ` Scott Wood
2012-09-14 19:07 ` Marek Vasut
2012-09-14 19:17 ` Scott Wood
2012-09-14 18:39 ` Tom Rini [this message]
2012-09-14 17:28 ` [U-Boot] [PATCH v2 03/11] serial: Add support to 4 ports in serial_s3c24x0 José Miguel Gonçalves
2012-09-14 17:28 ` [U-Boot] [PATCH v2 04/11] serial: Use a more precise baud rate generation for serial_s3c24x0 José Miguel Gonçalves
2012-09-14 18:05 ` Marek Vasut
2012-09-14 17:28 ` [U-Boot] [PATCH v2 05/11] serial: Remove unnecessary delay in serial_s3c24x0 José Miguel Gonçalves
2012-09-14 18:05 ` Marek Vasut
2012-09-14 17:28 ` [U-Boot] [PATCH v2 06/11] rtc: Improve rtc_get() on s3c24x0_rtc José Miguel Gonçalves
2012-09-14 18:06 ` Marek Vasut
2012-09-14 17:28 ` [U-Boot] [PATCH v2 07/11] rtc: Fix rtc_reset() " José Miguel Gonçalves
2012-09-14 18:07 ` Marek Vasut
2012-09-14 17:28 ` [U-Boot] [PATCH v2 08/11] rtc: Don't allow setting unsuported years " José Miguel Gonçalves
2012-09-14 18:08 ` Marek Vasut
2012-09-14 17:29 ` [U-Boot] [PATCH v2 09/11] S3C24XX: Add NAND Flash driver José Miguel Gonçalves
2012-09-14 18:21 ` Marek Vasut
2012-09-14 18:45 ` José Miguel Gonçalves
2012-09-14 19:01 ` Tom Rini
2012-09-16 9:16 ` José Miguel Gonçalves
2012-09-17 16:57 ` Tom Rini
2012-09-17 17:03 ` Scott Wood
2012-09-17 17:08 ` Tom Rini
2012-09-17 17:13 ` Scott Wood
2012-09-17 17:08 ` José Miguel Gonçalves
2012-09-17 17:56 ` Tom Rini
2012-09-17 18:05 ` José Miguel Gonçalves
2012-09-17 18:27 ` Tom Rini
2012-09-17 18:34 ` José Miguel Gonçalves
2012-09-17 18:56 ` Tom Rini
2012-09-14 19:24 ` Scott Wood
2012-09-14 20:20 ` Tom Rini
2012-09-14 20:29 ` Scott Wood
2012-09-17 11:11 ` José Miguel Gonçalves
2012-09-14 18:47 ` Tom Rini
2012-09-14 17:29 ` [U-Boot] [PATCH v2 10/11] Add u-boot-ubl.bin target to the Makefile José Miguel Gonçalves
2012-09-14 18:22 ` Marek Vasut
2012-09-14 19:08 ` Tom Rini
2012-09-16 9:27 ` José Miguel Gonçalves
2012-09-17 6:47 ` Christian Riesch
2012-09-17 8:30 ` José Miguel Gonçalves
2012-09-17 9:10 ` Christian Riesch
2012-09-17 9:24 ` José Miguel Gonçalves
2012-09-17 14:45 ` Tom Rini
2012-09-17 16:29 ` Marek Vasut
2012-09-17 16:35 ` Tom Rini
2012-09-17 16:27 ` Scott Wood
2012-09-17 16:51 ` Tom Rini
2012-09-17 17:32 ` Scott Wood
2012-09-17 17:53 ` Tom Rini
2012-09-17 18:16 ` Scott Wood
2012-09-17 19:52 ` Wolfgang Denk
2012-09-14 17:29 ` [U-Boot] [PATCH v2 11/11] S3C24XX: Add support to MINI2416 board José Miguel Gonçalves
2012-09-14 18:58 ` Tom Rini
2012-09-16 9:11 ` José Miguel Gonçalves
2012-09-17 14:39 ` Tom Rini
2012-09-17 14:47 ` José Miguel Gonçalves
2012-09-17 15:11 ` Tom Rini
2012-09-18 12:11 ` José Miguel Gonçalves
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120914183950.GI22028@bill-the-cat \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox