[U-Boot] [GIT PULL] Pull request: u-boot-imx

[Albert ARIBAUD <albert.u.boot@aribaud.net>]

Hi Stefano,

On Mon, 17 Sep 2012 15:53:54 +0200, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx, thanks.
> 
> The following changes since commit
> a9f1a4893364ddbb8b7942cded91d4c17c4f5948:
> 
>   lsxl: support power switch (2012-09-03 17:48:51 +0530)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to
> 1d9b033269263a69f7402f508c17b242fc7fea43:
> 
>   mx35pdk: README: Remove NAND references (2012-09-17 13:17:17 +0200)
> 
> ----------------------------------------------------------------
> Ashok Kumar Reddy (2):
>       ima3-mx53:Rename CONFIG_PRIME => CONFIG_ETHPRME, remove
>       mx6qsabrelite:Use IMX_GPIO_NR Macro
> 
> Beno?t Th?baudeau (8):
>       mx35: Fix decode_pll
>       mx35: Add definitions for clock gate values
>       mx35: Fix clock dividers
>       mx25: Define default SoC input clock frequencies
>       mx35: Define default SoC input clock frequencies
>       mx35 timer: Switch to 32-kHz source
>       Fix mx31_decode_pll
>       mx31: Define default SoC input clock frequencies
> 
> Fabio Estevam (3):
>       mx28evk: Convert to mxs_adjust_memory_params()
>       mx28evk: Add USB Ethernet support
>       mx35pdk: README: Remove NAND references
> 
> Marek Vasut (7):
>       M28: Fix the use of gpmi-nand in mtdparts
>       MX28: Cleanup mxsboot within make mrproper
>       MX28: Fixup the ad-hoc use of DIGCTL_MICROSECONDS
>       SCSPS1: Enable caches
>       MX28: SPI: Fix the DMA DCache race condition
>       MX28: SPI: Fix the DMA chaining
>       MX28: MMC: Avoid DMA DCache race condition
> 
> Matt Sealey (1):
>       efikamx: refine USB support
> 
> Otavio Salvador (3):
>       MX28: mx28evk: Align SSP clock speed
>       MX28: mx28evk: Enable SPI DMA
>       mx28evk: extend default environment
> 
> Stefano Babic (3):
>       MX: set a common place to share code for Freescale i.MX
>       MX35: mx35pdk: add support for MMC
>       MX6: drop binary constants from iomux header
> 
>  Makefile                                           |    8 +-
>  arch/arm/cpu/arm1136/mx31/generic.c                |   12 +-
>  arch/arm/cpu/arm1136/mx31/timer.c                  |   16 +--
>  arch/arm/cpu/arm1136/mx35/generic.c                |   90
> ++++++-------- arch/arm/cpu/arm1136/mx35/timer.c                  |
> 46 +++++--- arch/arm/cpu/arm926ejs/mx25/generic.c              |    2
> +- arch/arm/cpu/arm926ejs/mx25/timer.c                |   16 +--
>  arch/arm/cpu/arm926ejs/mxs/spl_boot.c              |    8 +-
>  arch/arm/{cpu/armv7 => }/imx-common/Makefile       |    4 +-
>  arch/arm/{cpu/armv7 => }/imx-common/cmd_bmode.c    |    0
>  arch/arm/{cpu/armv7 => }/imx-common/cpu.c          |    0
>  .../imx-common/i2c.c => imx-common/i2c-mxv7.c}     |    0
>  arch/arm/{cpu/armv7 => }/imx-common/iomux-v3.c     |    0
>  arch/arm/{cpu/armv7 => }/imx-common/speed.c        |    0
>  arch/arm/{cpu/armv7 => }/imx-common/timer.c        |    0
>  arch/arm/include/asm/arch-mx25/clock.h             |   14 +++
>  arch/arm/include/asm/arch-mx31/clock.h             |   14 +++
>  arch/arm/include/asm/arch-mx35/clock.h             |   14 +++
>  arch/arm/include/asm/arch-mx35/crm_regs.h          |   48 +++-----
>  arch/arm/include/asm/arch-mx6/iomux.h              |  124
> ++++++++++----------
>  board/freescale/mx28evk/iomux.c                    |    2 +-
>  board/freescale/mx28evk/mx28evk.c                  |    4 +-
>  board/freescale/mx35pdk/README                     |   78
> +----------- board/freescale/mx35pdk/mx35pdk.c                  |
> 25 ++++ board/freescale/mx6qsabrelite/mx6qsabrelite.c      |   24 ++--
>  board/genesi/mx51_efikamx/Makefile                 |    6 +-
>  board/genesi/mx51_efikamx/efikamx-usb.c            |   12 ++
>  board/genesi/mx51_efikamx/efikamx.c                |    3 -
>  drivers/mmc/mxsmmc.c                               |    4 +
>  drivers/spi/mxs_spi.c                              |   58 +++++----
>  include/configs/flea3.h                            |    1 -
>  include/configs/ima3-mx53.h                        |    3 +-
>  include/configs/imx31_litekit.h                    |    1 -
>  include/configs/imx31_phycore.h                    |    1 -
>  include/configs/m28evk.h                           |    4 +-
>  include/configs/mx25pdk.h                          |    1 -
>  include/configs/mx28evk.h                          |   86
> ++++++++++++-- include/configs/mx31ads.h
> |    2 - include/configs/mx31pdk.h                          |    2 -
>  include/configs/mx35pdk.h                          |   18 ++-
>  include/configs/qong.h                             |    2 -
>  include/configs/sc_sps_1.h                         |    2 -
>  include/configs/tt01.h                             |    2 -
>  include/configs/zmx25.h                            |    1 -
>  44 files changed, 409 insertions(+), 349 deletions(-)
>  rename arch/arm/{cpu/armv7 => }/imx-common/Makefile (94%)
>  rename arch/arm/{cpu/armv7 => }/imx-common/cmd_bmode.c (100%)
>  rename arch/arm/{cpu/armv7 => }/imx-common/cpu.c (100%)
>  rename arch/arm/{cpu/armv7/imx-common/i2c.c => imx-common/i2c-mxv7.c}
> (100%)
>  rename arch/arm/{cpu/armv7 => }/imx-common/iomux-v3.c (100%)
>  rename arch/arm/{cpu/armv7 => }/imx-common/speed.c (100%)
>  rename arch/arm/{cpu/armv7 => }/imx-common/timer.c (100%)
> 
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.