[U-Boot] [PATCH v4 0/4] USB multi controller

[Marek Vasut <marex@denx.de>]

Dear Lucas Stach,

Patchset doesn't apply ... rebase and repost please.

> V4: Fixed build failures in fsl and mxs ehci code. Also rebased on
> the latest usb/master and did MAKEALL -a powerpc in addition to
> MAKEALL -a arm.
> 
> V3: Stephen ran into some problems applying this, as it seems my tree
> wasn't as clean as it should have been. Sorry for the inconvenience.
> This should now be fixed.
> 
> Hi all,
> 
> this is a follow up on the patch "USB: EHCI: Initialize multiple
> USB controllers at once" from Jim Lin. It takes some of the
> code but has undergone some heavy reworking.
> 
> When we remove the ifdef horror from the above mentioned patch it's
> mostly a big interface change to the usb subsystem. As this creates
> a lot of churn I've split this up into a series. Every patch is self
> contained so it doesn't break compiles and *should* not regress
> any functionality on it's own. At least the series is bisectable in
> case anything goes wrong. I've compile tested all the ARM configs.
> 
> Both the lowlevel usb and ehci interface change are backward
> compatible, so implementations that only use one controller can
> choose to ignore the new interface. All implementations are
> updated to work with the new function prototypes.
> 
> For Tegra I've included a patch to actually use the new ehci
> interface. Tom, Stephen, can I get an ACK from you for this, so
> Marek can take this through his USB tree?
> 
> All patches now rebased onto u-boot-usb/master.
> 
> Patch 3 also includes some cosmetic changes, to make the output
> of the usb commands more readable.
> 
> On my Colibri T20, with a total of 3 usb controllers of which 2
> are enabled in the device tree, output now looks like this:
> 
> Tegra20 (Colibri) # usb start
> (Re)start USB...
> USB0:   USB EHCI 1.00
> scanning bus 0 for devices... 2 USB Device(s) found
> USB1:   USB EHCI 1.00
> scanning bus 1 for devices... 2 USB Device(s) found
> USB2:   lowlevel init failed
>        scanning usb for storage devices... 1 Storage Device(s) found
>        scanning usb for ethernet devices... 1 Ethernet Device(s) found
> 
> Tegra20 (Colibri) # usb tree
> USB device tree:
>   1  Hub (480 Mb/s, 0mA)
> 
>   |  u-boot EHCI Host Controller
> 
>   +-2  Mass Storage (480 Mb/s, 200mA)
>        SanDisk U3 Titanium 2845221DC342AE8F
> 
>   3  Hub (480 Mb/s, 0mA)
> 
>   |  u-boot EHCI Host Controller
> 
>   +-4  Vendor specific (480 Mb/s, 4mA)
>        ASIX Elec. Corp. AX88772B 000001
> 
> Lucas Stach (4):
>   usb: lowlevel interface change to support multiple controllers
>   usb: ehci: rework to take advantage of new lowlevel interface
>   usb: add support for multiple usb controllers
>   tegra20: port to new ehci interface
> 
>  arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c       |   4 +-
>  arch/arm/cpu/armv7/tegra20/usb.c              |  15 +---
>  arch/arm/include/asm/arch-tegra20/usb.h       |   4 +-
>  arch/arm/include/asm/ehci-omap.h              |  10 ++-
>  arch/mips/cpu/mips32/au1x00/au1x00_usb_ohci.c |   4 +-
>  arch/powerpc/cpu/mpc5xxx/usb_ohci.c           |   4 +-
>  arch/powerpc/cpu/ppc4xx/usb_ohci.c            |   4 +-
>  arch/sparc/cpu/leon3/usb_uhci.c               |   4 +-
>  arch/sparc/lib/bootm.c                        |   2 +-
>  board/htkw/mcx/mcx.c                          |   6 +-
>  board/mpl/common/usb_uhci.c                   |   4 +-
>  board/technexion/twister/twister.c            |   6 +-
>  board/teejet/mt_ventoux/mt_ventoux.c          |   6 +-
>  board/ti/beagle/beagle.c                      |   6 +-
>  board/ti/panda/panda.c                        |   6 +-
>  common/cmd_usb.c                              |  16 +++-
>  common/usb.c                                  | 108 +++++++++++-----------
>  common/usb_hub.c                              |   2 +-
>  common/usb_storage.c                          |   2 +-
>  drivers/usb/eth/usb_ether.c                   |   2 +-
>  drivers/usb/host/ehci-armada100.c             |  15 ++--
>  drivers/usb/host/ehci-atmel.c                 |  11 ++-
>  drivers/usb/host/ehci-core.h                  |  29 ------
>  drivers/usb/host/ehci-exynos.c                |  15 ++--
>  drivers/usb/host/ehci-fsl.c                   |  15 ++--
>  drivers/usb/host/ehci-hcd.c                   | 124
> ++++++++++++++------------ drivers/usb/host/ehci-ixp4xx.c                |
>  15 ++--
>  drivers/usb/host/ehci-marvell.c               |  15 ++--
>  drivers/usb/host/ehci-mpc512x.c               |  25 ++----
>  drivers/usb/host/ehci-mx5.c                   |  11 ++-
>  drivers/usb/host/ehci-mx6.c                   |  11 ++-
>  drivers/usb/host/ehci-mxc.c                   |  11 ++-
>  drivers/usb/host/ehci-mxs.c                   |  20 +++--
>  drivers/usb/host/ehci-omap.c                  |  10 ++-
>  drivers/usb/host/ehci-pci.c                   |  15 ++--
>  drivers/usb/host/ehci-ppc4xx.c                |  11 ++-
>  drivers/usb/host/ehci-tegra.c                 |  14 ++-
>  drivers/usb/host/ehci-vct.c                   |   9 +-
>  drivers/usb/host/ehci.h                       |   4 +-
>  drivers/usb/host/isp116x-hcd.c                |   4 +-
>  drivers/usb/host/ohci-hcd.c                   |   4 +-
>  drivers/usb/host/r8a66597-hcd.c               |   4 +-
>  drivers/usb/host/sl811-hcd.c                  |   4 +-
>  drivers/usb/musb/musb_hcd.c                   |   4 +-
>  include/usb.h                                 |  10 ++-
>  include/usb/mv_udc.h                          |   2 +-
>  46 Dateien ge?ndert, 309 Zeilen hinzugef?gt(+), 318 Zeilen entfernt(-)
>  delete mode 100644 drivers/usb/host/ehci-core.h

Best regards,
Marek Vasut