From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Tue, 2 Oct 2012 12:17:40 +0200
Subject: [U-Boot] Has anyone gotten the mmc commands to work on the
	NOVSOMTMi.MX6Q-SL-1-D, on the NOVPEK board by Novtech?
In-Reply-To: <CEF1C43EC1BF464090308EB428E13600022198@AMEXMB02.ds.jdsu.net>
References: <CEF1C43EC1BF464090308EB428E13600022198@AMEXMB02.ds.jdsu.net>
Message-ID: <201210021217.40424.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Greg Topmiller,

> I am using release 2012.07 of u-boot with board type freescale/mx6qarm2. 
> The mx6qarm2 is what is used as the board type in the freescale u-boot
> delivered with the board.  We want to use the main line u-boot 2012.07. 
> To get it working I had to change the serial port and it boots ok.  I also
> noticed sdhc1 and sdhc2 were not being initialized with
> fsl_esdhc_initialize.  I tried to initialize them but it hangs on "mmc
> rescan".  I turned on CONFIG_MMC_TRACE and get the following.
[..]

Do you supply power to the card ?

Best regards,
Marek Vasut