From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v6] h2200: Add USB CDC ethernet support
Date: Wed, 3 Oct 2012 21:22:09 +0200 [thread overview]
Message-ID: <201210032122.09896.marex@denx.de> (raw)
In-Reply-To: <506C8BAE.4020108@gmail.com>
Dear ?ukasz Da?ek,
> On 03.10.2012 20:34, Marek Vasut wrote:
> > Dear Lukasz Dalek,
> >
> >> Add support for ethernet over USB which can be used for e.g. booting
> >> process. It works with tftp and dhcp clients code.
> >>
> >> Signed-off-by: Lukasz Dalek<luk0104@gmail.com>
> >> ---
> >>
> >> Changes for v6:
> >> - Defined only one entire for board
> >>
> >> Changes for v5:
> >> - Surrendered #include<usb.h> with CONFIGs
> >>
> >> board/h2200/h2200.c | 17 +++++++++++++++++
> >> boards.cfg | 2 +-
> >> include/configs/h2200.h | 27 +++++++++++++++++++++++++++
> >> 3 files changed, 45 insertions(+), 1 deletions(-)
> >>
> >> diff --git a/board/h2200/h2200.c b/board/h2200/h2200.c
> >> index 3076306..617bb04 100644
> >> --- a/board/h2200/h2200.c
> >> +++ b/board/h2200/h2200.c
> >> @@ -22,9 +22,20 @@
> >>
> >> #include<asm/arch/pxa.h>
> >> #include<asm/arch/pxa-regs.h>
> >> #include<asm/io.h>
> >>
> >> +#ifdef CONFIG_H2200_USBETH
> >
> > It's always defined, remove it.
> >
> >> +# include<usb.h>
> >> +#endif
> >>
> >> DECLARE_GLOBAL_DATA_PTR;
> >>
> >> +#ifdef CONFIG_H2200_USBETH
> >> +int board_eth_init(bd_t *bis)
> >> +{
> >> + usb_eth_initialize(bis);
> >> + return 0;
> >> +}
> >> +#endif
> >> +
> >>
> >> int board_init(void)
> >> {
> >>
> >> /* We have RAM, disable cache */
> >>
> >> @@ -36,6 +47,12 @@ int board_init(void)
> >>
> >> /* adress of boot parameters */
> >> gd->bd->bi_boot_params = 0xa0000100;
> >>
> >> + /* Let host see that device is disconnected */
> >> +#if defined(CONFIG_H2200_USBETH)
> >> + udc_disconnect();
> >> + mdelay(500);
> >> +#endif
> >> +
> >>
> >> return 0;
> >>
> >> }
> >>
> >> diff --git a/boards.cfg b/boards.cfg
> >> index ab10938..f557c2b 100644
> >> --- a/boards.cfg
> >> +++ b/boards.cfg
> >> @@ -282,7 +282,7 @@ dvlhost arm ixp
> >>
> >> pdnb3 arm ixp pdnb3
> >>
> >> prodrive scpu arm ixp pdnb3
> >>
> >> prodrive - pdnb3:SCPU balloon3
> >>
> >> arm pxa
> >> -h2200 arm pxa
> >> +h2200 arm pxa h2200
> >> -
> >>
> >> - h2200:H2200_USBETH lubbock
> >
> > [...]
> >
> > This change isn't needed if you remove CONFIG_H2200_USBETH
> >
> >> diff --git a/include/configs/h2200.h b/include/configs/h2200.h
> >> index de5299b..4c5a1ae 100644
> >> --- a/include/configs/h2200.h
> >> +++ b/include/configs/h2200.h
> >> @@ -153,4 +153,31 @@
> >>
> >> #define CONFIG_BOOTARGS "root=/dev/ram0 ro console=ttyS0,115200n8"
> >>
> >> +#ifdef CONFIG_H2200_USBETH
> >
> > ifdef - endif not needed, otherwise good.
> >
> >> +# define CONFIG_SYS_CONSOLE_IS_IN_ENV
> >> +# define CONFIG_USB_DEV_PULLUP_GPIO 33
> >> +/* USB VBUS GPIO 3 */
> >> +
> >> +# define CONFIG_CMD_NET
> >> +# define CONFIG_CMD_PING
> >> +
> >> +# define CONFIG_BOOTDELAY 2
> >> +# define CONFIG_BOOTCOMMAND \
> >> + "setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \
> >> + "if bootp ; then setenv downloaded 1 ; fi ; done ; " \
> >> + "source :script ; " \
> >> + "bootm ; "
> >> +
> >> +# define CONFIG_USB_GADGET_PXA2XX
> >> +# define CONFIG_USB_ETHER
> >> +# define CONFIG_USB_ETH_SUBSET
> >> +
> >> +# define CONFIG_USBNET_DEV_ADDR "de:ad:be:ef:00:01"
> >> +# define CONFIG_USBNET_HOST_ADDR "de:ad:be:ef:00:02"
> >> +# define CONFIG_EXTRA_ENV_SETTINGS \
> >> + "stdin=serial\0" \
> >> + "stdout=serial\0" \
> >> + "stderr=serial\0"
> >> +#endif
> >> +
> >>
> >> #endif /* __CONFIG_H */
>
> Why do I have to remove CONFIG_H2200_USBETH? If I do so, I'm not be able to
> disable USB ethernet support.
Why would you disable it?
next prev parent reply other threads:[~2012-10-03 19:22 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-02 22:51 [U-Boot] [PATCH v5 1/3] h2200: Add support for iPAQ h2200 palmtop Lukasz Dalek
2012-10-02 22:51 ` [U-Boot] [PATCH v5 2/3] pxa: Add code to examine cpu model and revision Lukasz Dalek
2012-10-02 22:51 ` [U-Boot] [PATCH v5 3/3] h2200: Add USB CDC ethernet support Lukasz Dalek
2012-10-03 0:06 ` Marek Vasut
2012-10-03 0:09 ` Łukasz Dałek
2012-10-03 0:18 ` Marek Vasut
2012-10-03 0:24 ` Łukasz Dałek
2012-10-03 0:25 ` Marek Vasut
2012-10-03 0:30 ` Łukasz Dałek
2012-10-03 1:04 ` Marek Vasut
2012-10-03 9:50 ` Łukasz Dałek
2012-10-03 18:20 ` [U-Boot] [PATCH v6] " Lukasz Dalek
2012-10-03 18:34 ` Marek Vasut
2012-10-03 19:02 ` Łukasz Dałek
2012-10-03 19:22 ` Marek Vasut [this message]
2012-10-03 19:25 ` Łukasz Dałek
2012-10-03 19:40 ` Marek Vasut
2012-10-03 19:44 ` Łukasz Dałek
2012-10-03 20:02 ` Marek Vasut
2012-10-03 21:10 ` Łukasz Dałek
2012-10-03 21:32 ` Marek Vasut
2012-10-03 21:46 ` [U-Boot] [PATCH v7] " Lukasz Dalek
2012-10-03 23:30 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201210032122.09896.marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox