* [U-Boot] [PATCH] configs: Fix usage of mmc rescan
@ 2012-10-01 15:06 Andrew Bradford
2012-10-17 15:39 ` Tom Rini
0 siblings, 1 reply; 2+ messages in thread
From: Andrew Bradford @ 2012-10-01 15:06 UTC (permalink / raw)
To: u-boot
Fix usage of 'mmc rescan' by many configs. Proper use is
'mmc dev ${mmcdev}; mmc rescan' to set the mmc device and then rescan
the device. 'mmc rescan' itself does not take any arguments.
Signed-off-by: Andrew Bradford <andrew@bradfordembedded.com>
---
include/configs/am335x_evm.h | 2 +-
include/configs/am3517_crane.h | 2 +-
include/configs/am3517_evm.h | 2 +-
include/configs/cm_t35.h | 2 +-
include/configs/devkit8000.h | 2 +-
include/configs/igep00x0.h | 2 +-
include/configs/mx28evk.h | 2 +-
include/configs/mx51evk.h | 2 +-
include/configs/mx53ard.h | 2 +-
include/configs/mx53evk.h | 2 +-
include/configs/mx53loco.h | 2 +-
include/configs/mx53smd.h | 2 +-
include/configs/mx6qarm2.h | 2 +-
include/configs/mx6qsabrelite.h | 2 +-
include/configs/omap3_beagle.h | 2 +-
include/configs/omap3_evm.h | 2 +-
include/configs/omap3_logic.h | 2 +-
include/configs/omap3_overo.h | 2 +-
include/configs/omap3_zoom1.h | 2 +-
include/configs/omap4_common.h | 2 +-
include/configs/omap5_evm.h | 2 +-
include/configs/tricorder.h | 2 +-
22 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 263a5ad..6bda1cf 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -81,7 +81,7 @@
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"echo SD/MMC found on device ${mmcdev};" \
"if run loadbootenv; then " \
"echo Loaded environment from ${bootenv};" \
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 8ddeff4..20a3df5 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -209,7 +209,7 @@
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 6980811..ce71d13 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -206,7 +206,7 @@
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 46c556d..6f355c7 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -231,7 +231,7 @@
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 2d2ee5f..7faa868 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -232,7 +232,7 @@
"dhcp ${loadaddr}; " \
"run netargs; " \
"bootm ${loadaddr}\0" \
- "autoboot=if mmc rescan ${mmcdev}; then " \
+ "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h
index b1071e8..c81ab76 100644
--- a/include/configs/igep00x0.h
+++ b/include/configs/igep00x0.h
@@ -180,7 +180,7 @@
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"echo SD/MMC found on device ${mmcdev};" \
"if run loadbootenv; then " \
"run importbootenv;" \
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index dffb744..385ee71 100644
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -312,7 +312,7 @@
"dhcp ${uimage}; bootm\0"
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index ba4a4a6..8f960dd 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -183,7 +183,7 @@
"dhcp ${uimage}; bootm\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h
index 6ab4cde..6c12f20 100644
--- a/include/configs/mx53ard.h
+++ b/include/configs/mx53ard.h
@@ -121,7 +121,7 @@
"dhcp ${uimage}; bootm\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index b46855f..4405f73 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -134,7 +134,7 @@
"dhcp ${uimage}; bootm\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 8cbaf08..2c0159f 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -142,7 +142,7 @@
"dhcp ${uimage}; bootm\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h
index f54d328..89dc07f 100644
--- a/include/configs/mx53smd.h
+++ b/include/configs/mx53smd.h
@@ -120,7 +120,7 @@
"dhcp ${uimage}; bootm\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
index 6c17895..7938612 100644
--- a/include/configs/mx6qarm2.h
+++ b/include/configs/mx6qarm2.h
@@ -108,7 +108,7 @@
#define CONFIG_BOOTCOMMAND \
"mmc dev ${mmcdev};" \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index 72d0154..b9e7e7d 100644
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -166,7 +166,7 @@
#define CONFIG_BOOTCOMMAND \
"mmc dev ${mmcdev};" \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index f79f996..7a3cc16 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -289,7 +289,7 @@
"userbutton_nonxm=gpio input 7;\0"
/* "run userbutton" will return 1 (false) if is pressed and 0 (false) if not */
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run userbutton; then " \
"setenv bootenv uEnv.txt;" \
"else " \
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 632a13f..f6e4236 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -162,7 +162,7 @@
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index b975a6c..b2457d0 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -202,7 +202,7 @@
"mtdids=" MTDIDS_DEFAULT "\0" \
"mtdparts=" MTDPARTS_DEFAULT "\0" \
"mmcdev=0\0" \
- "autoboot=if mmc rescan ${mmcdev}; then " \
+ "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index f6d6f75..626cf7a 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -188,7 +188,7 @@
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index 891e6f4..e152055 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -198,7 +198,7 @@
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index cbc9bdb..a32369a 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -165,7 +165,7 @@
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_evm.h
index 743edfd..623da77 100644
--- a/include/configs/omap5_evm.h
+++ b/include/configs/omap5_evm.h
@@ -167,7 +167,7 @@
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index 00d02e8..5859a73 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -201,7 +201,7 @@
"run nandargs; " \
"run loaduimage_ubi; " \
"bootm ${loadaddr}\0" \
- "autoboot=if mmc rescan ${mmcdev}; then " \
+ "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
--
1.7.10
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [U-Boot] [PATCH] configs: Fix usage of mmc rescan
2012-10-01 15:06 [U-Boot] [PATCH] configs: Fix usage of mmc rescan Andrew Bradford
@ 2012-10-17 15:39 ` Tom Rini
0 siblings, 0 replies; 2+ messages in thread
From: Tom Rini @ 2012-10-17 15:39 UTC (permalink / raw)
To: u-boot
On Mon, Oct 01, 2012 at 11:06:52AM -0400, Andrew Bradford wrote:
> Fix usage of 'mmc rescan' by many configs. Proper use is
> 'mmc dev ${mmcdev}; mmc rescan' to set the mmc device and then rescan
> the device. 'mmc rescan' itself does not take any arguments.
>
> Signed-off-by: Andrew Bradford <andrew@bradfordembedded.com>
Applied to u-boot-ti/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20121017/367ff4b7/attachment.pgp>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-10-17 15:39 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-10-01 15:06 [U-Boot] [PATCH] configs: Fix usage of mmc rescan Andrew Bradford
2012-10-17 15:39 ` Tom Rini
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox