From: Albert ARIBAUD <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 01/11] arm: ks8695: use defined constants for UART
Date: Fri, 26 Oct 2012 23:34:26 +0200 [thread overview]
Message-ID: <20121026233426.4df62489@lilith> (raw)
In-Reply-To: <1349438998-10954-2-git-send-email-yann.vernier@orsoc.se>
Hi Yann,
On Fri, 5 Oct 2012 14:09:48 +0200, Yann Vernier
<yann.vernier@orsoc.se> wrote:
> CONFIG_BAUDRATE and KS8695_UART_LINEC_WLEN8 used for UART registers
> ---
> arch/arm/cpu/arm920t/ks8695/lowlevel_init.S | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S b/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S
> index e9f1227..1bba571 100644
> --- a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S
> +++ b/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S
> @@ -72,10 +72,10 @@ lowlevel_init:
> * enable UART for early debug trace
> */
> ldr r1, =(KS8695_IO_BASE+KS8695_UART_DIVISOR)
> - mov r2, #0xd9
> - str r2, [r1] /* 115200 baud */
> + mov r2, #((25000000+CONFIG_BAUDRATE/2) / CONFIG_BAUDRATE)
> + str r2, [r1]
> ldr r1, =(KS8695_IO_BASE+KS8695_UART_LINE_CTRL)
> - mov r2, #0x03
> + mov r2, #KS8695_UART_LINEC_WLEN8
> str r2, [r1] /* 8 data bits, no parity, 1 stop */
> ldr r1, =(KS8695_IO_BASE+KS8695_UART_TX_HOLDING)
> mov r2, #0x41
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
next prev parent reply other threads:[~2012-10-26 21:34 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-05 8:05 [U-Boot] [PATCH 3/3] cm4008: use common cfi_flash support Yann Vernier
2012-07-05 9:48 ` Andreas Bießmann
2012-07-05 13:11 ` [U-Boot] [PATCH v2] arm: cm4008, cm41xx: " Yann Vernier
2012-07-05 15:04 ` Andreas Bießmann
2012-07-06 8:27 ` [U-Boot] [PATCH v3] " Yann Vernier
2012-07-06 8:47 ` Andreas Bießmann
2012-07-06 11:33 ` Albert ARIBAUD
2012-08-09 13:33 ` [U-Boot] [PATCH 10/11] arm: ks8695: document bus speed Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 00/11] ks8695 (cm4008, cm41xx) bugfixes, constant removals, configuration generalized Yann Vernier
2012-10-04 9:15 ` Albert ARIBAUD
2012-10-05 12:09 ` [U-Boot] [PATCH 00/11] ks8695 (cm4008, cm41xx) bugfixes, constant removals, configuration generalized (repost) Yann Vernier
2012-10-05 12:09 ` [U-Boot] [PATCH 01/11] arm: ks8695: use defined constants for UART Yann Vernier
2012-10-26 21:34 ` Albert ARIBAUD [this message]
2012-10-05 12:09 ` [U-Boot] [PATCH 02/11] arm: ks8695: more macros for register values Yann Vernier
2012-10-18 18:57 ` Albert ARIBAUD
2012-11-19 11:55 ` [U-Boot] [PATCH] " Yann Vernier
2012-11-19 12:29 ` Yann Vernier
2012-11-20 0:05 ` Marek Vasut
2012-10-05 12:09 ` [U-Boot] [PATCH 03/11] arm: ks8695eth: Use MAC address from environment Yann Vernier
2012-10-18 19:00 ` Albert ARIBAUD
2012-10-18 20:55 ` Joe Hershberger
2012-10-19 8:02 ` Yann Vernier
2012-10-26 21:37 ` Albert ARIBAUD
2012-11-19 11:42 ` Yann Vernier
2012-12-01 19:23 ` Joe Hershberger
2012-10-05 12:09 ` [U-Boot] [PATCH 04/11] arm: cm4008, cm41xx: use common cfi_flash support Yann Vernier
2012-10-05 12:09 ` [U-Boot] [PATCH 05/11] arm: cm4008, cm41xx: set gd->ram_size in dram_init Yann Vernier
2012-10-05 12:09 ` [U-Boot] [PATCH 06/11] arm: cm4008, cm41xx: Fix ROM relocation Yann Vernier
2012-10-18 19:09 ` Albert ARIBAUD
2012-10-19 8:08 ` Yann Vernier
2012-10-05 12:09 ` [U-Boot] [PATCH 07/11] arm: ks8695/cm4008/cm41xx: Parameterize SDRAM Yann Vernier
2012-10-18 19:11 ` Albert ARIBAUD
2012-10-05 12:09 ` [U-Boot] [PATCH 08/11] arm: cm4008, cm41xx: don't define to 1 Yann Vernier
2012-10-05 12:09 ` [U-Boot] [PATCH 09/11] arm: ks8695/cm4xxx: don't reconfigure switch Yann Vernier
2012-10-18 19:13 ` Albert ARIBAUD
2012-10-05 12:09 ` [U-Boot] [PATCH 10/11] arm: ks8695: document bus speed Yann Vernier
2012-10-05 12:09 ` [U-Boot] [PATCH 11/11] arm: cm4008, cm41xx: read MAC address from flash Yann Vernier
2012-10-18 19:14 ` Albert ARIBAUD
2012-11-10 8:03 ` [U-Boot] [PATCH 00/11] ks8695 (cm4008, cm41xx) bugfixes, constant removals, configuration generalized (repost) Albert ARIBAUD
2012-11-13 12:46 ` Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 11/11] arm: cm4008, cm41xx: read MAC address from flash Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 07/11] arm: ks8695/cm4008/cm41xx: Parameterize SDRAM Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 09/11] arm: ks8695/cm4xxx: don't reconfigure switch Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 08/11] arm: cm4008, cm41xx: don't define to 1 Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 03/11] arm: ks8695eth: Use MAC address from environment Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 04/11] arm: cm4008, cm41xx: use common cfi_flash support Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 05/11] arm: cm4008, cm41xx: set gd->ram_size in dram_init Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 06/11] arm: cm4008, cm41xx: Fix ROM relocation Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 02/11] arm: ks8695: more macros for register values Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 01/11] arm: ks8695: use defined constants for UART Yann Vernier
2012-07-05 13:22 ` [U-Boot] [PATCH v2] arm: cm4008, cm41xx: Fix ROM relocation Yann Vernier
2012-07-05 13:41 ` Yann Vernier
2012-07-05 15:19 ` Andreas Bießmann
2012-07-12 19:37 ` Albert ARIBAUD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121026233426.4df62489@lilith \
--to=albert.u.boot@aribaud.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox