From mboxrd@z Thu Jan  1 00:00:00 1970
From: Albert ARIBAUD <albert.u.boot@aribaud.net>
Date: Fri, 26 Oct 2012 23:34:26 +0200
Subject: [U-Boot] [PATCH 01/11] arm: ks8695: use defined constants for
	UART
In-Reply-To: <1349438998-10954-2-git-send-email-yann.vernier@orsoc.se>
References: <1349438998-10954-1-git-send-email-yann.vernier@orsoc.se>
	<1349438998-10954-2-git-send-email-yann.vernier@orsoc.se>
Message-ID: <20121026233426.4df62489@lilith>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Yann,

On Fri,  5 Oct 2012 14:09:48 +0200, Yann Vernier
<yann.vernier@orsoc.se> wrote:

> CONFIG_BAUDRATE and KS8695_UART_LINEC_WLEN8 used for UART registers
> ---
>  arch/arm/cpu/arm920t/ks8695/lowlevel_init.S |    6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S b/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S
> index e9f1227..1bba571 100644
> --- a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S
> +++ b/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S
> @@ -72,10 +72,10 @@ lowlevel_init:
>  	 * enable UART for early debug trace
>  	 */
>  	ldr	r1, =(KS8695_IO_BASE+KS8695_UART_DIVISOR)
> -	mov	r2, #0xd9
> -	str	r2, [r1]		/* 115200 baud */
> +	mov	r2, #((25000000+CONFIG_BAUDRATE/2) / CONFIG_BAUDRATE)
> +	str	r2, [r1]
>  	ldr	r1, =(KS8695_IO_BASE+KS8695_UART_LINE_CTRL)
> -	mov	r2, #0x03
> +	mov	r2, #KS8695_UART_LINEC_WLEN8
>  	str	r2, [r1]		/* 8 data bits, no parity, 1 stop */
>  	ldr	r1, =(KS8695_IO_BASE+KS8695_UART_TX_HOLDING)
>  	mov	r2, #0x41

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.