[U-Boot] [PATCH v2 0/2] Factorize ARM startup code as mush as possible.

[Sughosh Ganu <urwithsughosh@gmail.com>]

hi Albert,

On Mon Nov 05, 2012 at 01:09:25PM +0530, Sughosh Ganu wrote:
> On Sun Nov 04, 2012 at 10:38:32AM -0700, Tom Rini wrote:
> > On Sun, Nov 04, 2012 at 12:43:12PM +0100, Albert ARIBAUD wrote:
> > 
> > > Hi Tom,
> > > 
> > > On Sun,  4 Nov 2012 12:32:03 +0100, Albert ARIBAUD
> > > <albert.u.boot@aribaud.net> wrote:
> > > 
> > > > The goal of this series is to scrub the start.S files
> > > > which have proliferated across arch/arm and eliminate
> > > > code redundancy.
> > > 
> > > I know this came a bit late in early nov 4th, but I really would like
> > > it to be considered for 2013.01. Would you agree to make an exception
> > > for it? Thanks in advance.
> > 
> > If you can collect a diverse set of Tested-by's, yes.
> 
> I have not gone through the patch, but will test it in a day or two on
> the hawkboard, and report the findings.
> 
> The hawkboard comes with the arm926ejs core, so that part of the code
> would be tested.

I tried the 1st patch of the series, and with that u-boot does not
come up on the board. It is also printing out some random values for
the dram and nand sizes.

The patch was applied on top of commit 1cc619be8b7. Also, with the
mentioned commit, u-boot boots up fine on the board. Also to be noted
is that the spl image compiled with these changes is booting up fine,
loading the main u-boot image, and jumping to it -- the issue is with
booting the main u-boot image.

-sughosh