[U-Boot] U-Boot 2012.10 PXA270 - saveenv / Kernel issue

[Marek Vasut <marex@denx.de>]

Dear Andreas Puls,

you have much better chance of getting a proper reply if you Cc 
custodian/maintainer (see MAINTAINERS) file.

> Hello everyone,
> 
> 
> i have a problem with the latest stable U-Boot 2012.10 and a Toradex
> Colibri PXA270 V2.4a Board and a upating the kernel.
> 
> The problem apears when i erase the hole NOR Flash, copy the uboot and
> the uImage.
> 
> Here are my steps.
> 
> 1.  unprotect and erase the hole flash.
> 2.  copy the latest u-boot.bin to flash
> 2.1 usb start
> 2.2 fatload usb 0:1 0xa0000000 u-boot.bin
> 2.3 protect off 0x0 0x3ffff

You mean protect off 0 0x40000 ? (0x3ffff makes no sense)

> 2.4 erase 0x0 0x3ffff
> 2.5 cp.b 0xa0000000 0x0 $filesize
> 3   reset to look the u-boot is installed
> 3.1 see that CRC is bad (normal behavier couse no defaults are written)
> 3.2 savenv and powercyle
> 4.  all fine
> 5.  copy kernel image to flash
> 5.1 usb start
> 5.2 fatload usb 0:1 0xa0000000 uimage-2.6.35.9-toradex-pxa270v22b
> 5.3 protect off 0xc0000 0x47ffff
> 5.4 erase 0xc0000 0x47ffff
> 5.5 cp.b 0xa0000000 0xc0000 $filesize
> 6.  check the uImage
> 6.1 iminfo 0xC00000 - OK
> 7.  hard reset (power cycle)
> 
> Now comes the part that i dosen't understand
> The U-Boot loader sayes again that the CRC is bad and using default values.

Did you not overwrite the env? The env is at 0x40000 in the flash.

163 #define CONFIG_SYS_MONITOR_BASE         0x0
164 #define CONFIG_SYS_MONITOR_LEN          0x80000
165 
166 #define CONFIG_ENV_ADDR                 \
167                         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
168 #define CONFIG_ENV_SIZE                 0x40000
169 #define CONFIG_ENV_SECT_SIZE            0x40000
170 #define CONFIG_ENV_ADDR_REDUND          (CONFIG_ENV_ADDR + 
CONFIG_ENV_SECT_SIZE)
171 #define CONFIG_ENV_SIZE_REDUND          (CONFIG_ENV_SIZE)

> I use "saveenv" again and make a powercycle.
> The CRC error is no more but the u-boot isnt able to boot the uImage.
> It sayes unkown Image format
> 
> 
> Sory for the long description. I search the mailing but didnt found
> something.
> 
> The latest Toradex Bootloader is u-boot 1.3.3 there is the saveenv and
> Kernel update working. But the USB support isnt working.
> 
> Could anybody give me hint or maybe know the solution ?
> 
> Kind regards
>  Andreas

Best regards,
Marek Vasut