From: Albert ARIBAUD <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] pull request for u-boot-tegra/master into ARM/master
Date: Tue, 20 Nov 2012 07:21:25 +0100 [thread overview]
Message-ID: <20121120072125.6318ca8e@lilith> (raw)
In-Reply-To: <CA+m5__KuwiOwbVx2jku_zh6J_uJJThO9vPgKq4GBKGkhWgbM9w@mail.gmail.com>
Hi Tom,
On Mon, 19 Nov 2012 10:12:52 -0700, Tom Warren
<twarren.nvidia@gmail.com> wrote:
> Albert, please pull u-boot-tegra/master into ARM/master. Thanks!
>
> 'pxa' patch moved to before Simon's LCD patchset; MAKEALL -a arm AOK.
>
> The following changes since commit 7a5337732e3e05b2b0de1b592fa031b2c7b4f632:
> Rajeshwari Shinde (1):
> EXYNOS5: Enable SPI booting.
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-tegra master
>
> Allen Martin (1):
> tegra: add CONSOLE_MUX support to tegra-kbc
>
> Mayuresh Kulkarni (1):
> tegra: Enable display/lcd support on Seaboard
>
> Simon Glass (17):
> pxa: Disable dcache on palmld, palmtc, zipitz2
> tegra: Use const for pinmux_config_pingroup/table()
> tegra: Add display support to funcmux
> tegra: fdt: Add pwm binding and node
> tegra: fdt: Add LCD definitions for Tegra
> tegra: Add support for PWM
> tegra: Add LCD driver
> tegra: Add LCD support to Nvidia boards
> arm: Add control over cachability of memory regions
> lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment
> lcd: Add support for flushing LCD fb from dcache after update
> tegra: Align LCD frame buffer to section boundary
> tegra: Support control of cache settings for LCD
> tegra: fdt: Add LCD definitions for Seaboard
> lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console
> tegra: Remove unnecessary CONFIG_SYS_NAND_BASE
> tegra: config: seaboard: Move tegra-common-post to correct place
>
> Stephen Warren (4):
> ARM: tegra: TrimSlice: add support for USB1 port
> mmc: tegra: support 4-bit operation too on 8-bit slots
> ARM: tegra: enable 8-bit SD slots in board files
> tegra: use generic fs commands in BOOTCOMMAND
>
> Wei Ni (1):
> tegra: Add SOC support for display/lcd
>
> README | 16 +
> arch/arm/cpu/armv7/cache_v7.c | 11 +
> arch/arm/cpu/armv7/tegra20/Makefile | 2 +
> arch/arm/cpu/armv7/tegra20/display.c | 409 ++++++++++++++++++
> arch/arm/cpu/armv7/tegra20/pwm.c | 101 +++++
> arch/arm/cpu/tegra20-common/funcmux.c | 37 ++
> arch/arm/cpu/tegra20-common/pinmux.c | 4 +-
> arch/arm/dts/tegra20.dtsi | 105 +++++
> arch/arm/include/asm/arch-tegra20/dc.h | 545 ++++++++++++++++++++++++
> arch/arm/include/asm/arch-tegra20/display.h | 152 +++++++
> arch/arm/include/asm/arch-tegra20/pinmux.h | 4 +-
> arch/arm/include/asm/arch-tegra20/pwm.h | 75 ++++
> arch/arm/include/asm/system.h | 31 ++
> arch/arm/lib/cache-cp15.c | 51 ++-
> board/compal/paz00/paz00.c | 5 +-
> board/compulab/dts/tegra20-trimslice.dts | 3 +-
> board/compulab/trimslice/trimslice.c | 8 +
> board/nvidia/common/board.c | 24 +
> board/nvidia/dts/tegra20-seaboard.dts | 33 ++
> board/nvidia/harmony/harmony.c | 5 +-
> board/nvidia/seaboard/seaboard.c | 5 +-
> common/lcd.c | 89 ++++-
> common/main.c | 12 +-
> doc/device-tree-bindings/pwm/tegra20-pwm.txt | 18 +
> doc/device-tree-bindings/video/displaymode.txt | 42 ++
> doc/device-tree-bindings/video/tegra20-dc.txt | 85 ++++
> drivers/input/tegra-kbc.c | 18 +-
> drivers/mmc/tegra_mmc.c | 7 +-
> drivers/video/Makefile | 1 +
> drivers/video/tegra.c | 379 ++++++++++++++++
> include/configs/harmony.h | 4 +-
> include/configs/palmld.h | 3 +
> include/configs/palmtc.h | 3 +
> include/configs/paz00.h | 3 +
> include/configs/seaboard.h | 20 +-
> include/configs/tec.h | 1 -
> include/configs/tegra-common-post.h | 39 +-
> include/configs/tegra20-common.h | 3 +
> include/configs/trimslice.h | 4 +
> include/configs/ventana.h | 3 +
> include/configs/whistler.h | 3 +
> include/configs/zipitz2.h | 3 +
> include/fdtdec.h | 2 +
> include/lcd.h | 11 +
> lib/fdtdec.c | 2 +
> 45 files changed, 2303 insertions(+), 78 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/tegra20/display.c
> create mode 100644 arch/arm/cpu/armv7/tegra20/pwm.c
> create mode 100644 arch/arm/include/asm/arch-tegra20/dc.h
> create mode 100644 arch/arm/include/asm/arch-tegra20/display.h
> create mode 100644 arch/arm/include/asm/arch-tegra20/pwm.h
> create mode 100644 doc/device-tree-bindings/pwm/tegra20-pwm.txt
> create mode 100644 doc/device-tree-bindings/video/displaymode.txt
> create mode 100644 doc/device-tree-bindings/video/tegra20-dc.txt
> create mode 100644 drivers/video/tegra.c
>
>
> On Mon, Nov 19, 2012 at 8:39 AM, Tom Warren <twarren.nvidia@gmail.com> wrote:
> > That makes perfect sense - should have thought it through myself.
> >
> > I moved the pxa patch to before Simon's LCD patchset. Testing MAKEALL
> > -a arm now; should have a new pull request in a few hours.
> >
> > Thanks,
> >
> > Tom
> >
> > On Fri, Nov 16, 2012 at 5:12 PM, Albert ARIBAUD
> > <albert.u.boot@aribaud.net> wrote:
> >> Hi Tom,
> >>
> >> On Fri, 16 Nov 2012 16:42:49 -0700, Tom Warren
> >> <twarren.nvidia@gmail.com> wrote:
> >>
> >>> Albert,
> >>>
> >>> Please pull u-boot-tegra/master into ARM/master. The previously
> >>> failing pxa boards are fixed with 'pxa: Disable dcache on palmld,
> >>> palmtc, zipitz2'.
> >>
> >> Sorry to be a nuisance, but what I meant that I wanted all commits in
> >> the tegra pull req to succeed building if possible; with the added
> >> "disable cache" commit, the branch succeeds, but not all of its
> >> commits, which can hamper git bisects. Can the dcache disable patch
> >> actually appear before Simon's LCD commit?
> >>
> >> Amicalement,
> >> --
> >> Albert.
>
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
next prev parent reply other threads:[~2012-11-20 6:21 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-16 17:14 [U-Boot] pull request for u-boot-tegra/master into ARM/master Tom Warren
2012-11-16 21:27 ` Albert ARIBAUD
2012-11-16 21:45 ` Tom Warren
2012-11-16 23:33 ` Albert ARIBAUD
2012-11-16 23:42 ` Tom Warren
2012-11-17 0:12 ` Albert ARIBAUD
2012-11-19 15:39 ` Tom Warren
2012-11-19 17:12 ` Tom Warren
2012-11-20 6:21 ` Albert ARIBAUD [this message]
-- strict thread matches above, loose matches on Subject: below --
2014-08-20 16:12 Tom Warren
2014-08-29 17:48 ` Tom Rini
2014-06-19 17:53 Tom Warren
2014-07-01 16:58 ` Albert ARIBAUD
2014-06-06 15:53 Tom Warren
2014-06-08 7:13 ` Albert ARIBAUD
2014-05-13 21:14 Tom Warren
2014-05-15 16:15 ` Albert ARIBAUD
2014-04-17 16:08 Tom Warren
2014-04-21 19:00 ` Albert ARIBAUD
2014-03-06 15:39 Tom Warren
2014-03-07 14:30 ` Albert ARIBAUD
2014-02-04 23:19 Tom Warren
2014-02-11 16:42 ` Stephen Warren
2014-02-11 16:48 ` Albert ARIBAUD
2014-02-11 16:59 ` Stephen Warren
2014-02-11 17:48 ` Albert ARIBAUD
2014-02-12 17:12 ` Albert ARIBAUD
2013-12-18 20:06 Tom Warren
2013-12-18 21:18 ` Albert ARIBAUD
2013-12-18 22:28 ` Tom Warren
2013-08-19 22:57 Tom Warren
2013-09-04 9:49 ` Albert ARIBAUD
2013-07-11 22:00 Tom Warren
2013-07-12 7:51 ` Albert ARIBAUD
2013-06-06 16:30 Tom Warren
2013-06-07 8:06 ` Albert ARIBAUD
2013-05-28 21:16 Tom Warren
2013-05-29 16:16 ` Albert ARIBAUD
2013-04-15 23:28 Tom Warren
2013-04-16 17:17 ` Albert ARIBAUD
2013-04-16 19:55 ` Stephen Warren
2013-04-16 20:02 ` Tom Warren
2013-04-17 6:56 ` Albert ARIBAUD
2013-04-16 20:55 ` Albert ARIBAUD
2013-03-25 17:43 Tom Warren
2013-03-26 10:12 ` Albert ARIBAUD
2013-03-15 15:25 Tom Warren
2013-03-15 20:46 ` Albert ARIBAUD
2013-01-18 16:00 Tom Warren
2013-01-18 16:06 ` Albert ARIBAUD
2012-10-29 23:49 Tom Warren
2012-11-03 9:03 ` Albert ARIBAUD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121120072125.6318ca8e@lilith \
--to=albert.u.boot@aribaud.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox