From: Luka Perkov <luka@openwrt.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 09/22] ARM: sun4i: Enable ethernet support (wemac) on A10 boards
Date: Sun, 25 Nov 2012 16:05:40 +0100 [thread overview]
Message-ID: <20121125150540-9180@mutt-kz> (raw)
In-Reply-To: <1353843735.17518.20.camel@home.hno.se>
Hi Henrik,
On Sun, Nov 25, 2012 at 12:42:15PM +0100, Henrik Nordstr?m wrote:
> From: Stefan Roese <sr@denx.de>
> Signed-off-by: Stefan Roese <sr@denx.de>
> Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net>
> ---
> arch/arm/cpu/armv7/sunxi/board.c | 14 ++++++++++++++
> include/configs/sun4i.h | 8 ++++++++
> 2 files changed, 22 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
> index 5c94110..29cc4bd 100644
> --- a/arch/arm/cpu/armv7/sunxi/board.c
> +++ b/arch/arm/cpu/armv7/sunxi/board.c
> @@ -32,6 +32,7 @@
> #include <asm/arch/timer.h>
> #include <asm/arch/gpio.h>
> #include <asm/arch/sys_proto.h>
> +#include <netdev.h>
>
> int gpio_init(void)
> {
> @@ -78,3 +79,16 @@ void enable_caches(void)
> dcache_enable();
> }
> #endif
> +
> +#if defined(CONFIG_SUNXI_WEMAC)
> +/*
> + * Initializes on-chip ethernet controllers.
> + * to override, implement board_eth_init()
> + */
> +int cpu_eth_init(bd_t *bis)
> +{
> + sunxi_wemac_initialize(bis);
> +
> + return 0;
> +}
> +#endif
> diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h
> index 513f618..ad51446 100644
> --- a/include/configs/sun4i.h
> +++ b/include/configs/sun4i.h
> @@ -44,4 +44,12 @@
>
> #define CONFIG_CONS_INDEX 1 /* UART0 */
>
> +/* Ethernet support on A10 */
> +#define CONFIG_SUNXI_WEMAC
> +#define CONFIG_MII /* MII PHY management */
I would remove trailing tab and use one space.
> +
> +#define CONFIG_CMD_MII
> +#define CONFIG_CMD_NET
> +#define CONFIG_CMD_PING
> +
> #endif /* __CONFIG_H */
> --
> 1.7.7.6
Luka
next prev parent reply other threads:[~2012-11-25 15:05 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1353842684.git.henrik@henriknordstrom.net>
2012-11-25 11:37 ` [U-Boot] [PATCH 01/22] ARM: sunxi: Basic Allwinner A10/A13 (sun4i/sun5i) support Henrik Nordström
2012-11-25 12:23 ` Luka Perkov
2012-11-25 13:08 ` Henrik Nordström
2012-11-25 19:55 ` Wolfgang Denk
2012-11-26 1:05 ` [U-Boot] [PATCH 01/22] Re: Copyright on board makefiles Henrik Nordström
2012-11-26 5:54 ` Wolfgang Denk
2012-11-25 19:52 ` [U-Boot] [PATCH 01/22] ARM: sunxi: Basic Allwinner A10/A13 (sun4i/sun5i) support Wolfgang Denk
2012-11-25 18:06 ` Marek Vasut
2012-11-26 0:21 ` Henrik Nordström
2012-11-26 0:33 ` Marek Vasut
2012-11-26 5:52 ` Wolfgang Denk
2012-11-25 19:33 ` Wolfgang Denk
2012-11-25 23:53 ` Henrik Nordström
2012-11-26 8:00 ` Stefan Roese
2012-11-25 19:40 ` Wolfgang Denk
2012-11-25 11:37 ` [U-Boot] [PATCH 02/22] ARM: sunxi: MMC driver Henrik Nordström
2012-11-25 14:33 ` Luka Perkov
2012-11-25 15:39 ` Henrik Nordström
2012-11-25 17:07 ` Luka Perkov
2012-11-25 19:58 ` Wolfgang Denk
2012-11-25 19:56 ` Wolfgang Denk
2012-11-25 18:09 ` Marek Vasut
2012-11-25 19:44 ` Wolfgang Denk
2012-11-25 11:38 ` [U-Boot] [PATCH 03/22] ARM sunxi: I2C driver Henrik Nordström
2012-11-25 14:41 ` Luka Perkov
2012-11-25 15:47 ` Henrik Nordström
2012-11-25 18:11 ` Marek Vasut
2012-11-25 19:47 ` Wolfgang Denk
2012-11-26 11:13 ` Heiko Schocher
2012-11-26 13:39 ` Henrik Nordström
2012-11-25 11:39 ` [U-Boot] [PATCH 05/22] power: Add AXP209 Power Management controller (I2C) Henrik Nordström
2012-11-25 14:44 ` Luka Perkov
2012-11-25 18:13 ` Marek Vasut
2012-11-25 19:48 ` Wolfgang Denk
2012-11-25 11:40 ` [U-Boot] [PATCH 06/22] ARM sunxi: Basic GPIO driver Henrik Nordström
2012-11-25 14:52 ` Luka Perkov
2012-11-25 18:14 ` Marek Vasut
2012-11-25 19:50 ` Wolfgang Denk
2012-11-25 21:47 ` Marek Vasut
2012-11-25 23:41 ` Henrik Nordström
2012-11-25 11:40 ` [U-Boot] [PATCH 07/22] tools: mksunixboot adding a Allwinner boot header Henrik Nordström
2012-11-25 15:01 ` Luka Perkov
2012-11-25 17:47 ` Wolfgang Denk
2012-11-25 11:41 ` [U-Boot] [PATCH 08/22] net: Add sunxi (Allwinner) wemac driver Henrik Nordström
2013-07-08 15:43 ` Joe Hershberger
2013-07-08 16:16 ` Tom Rini
2013-07-08 16:29 ` Joe Hershberger
2013-07-08 19:03 ` Tom Rini
2012-11-25 11:42 ` [U-Boot] [PATCH 09/22] ARM: sun4i: Enable ethernet support (wemac) on A10 boards Henrik Nordström
2012-11-25 15:05 ` Luka Perkov [this message]
2012-11-25 11:43 ` [U-Boot] [PATCH 10/22] sunxi: Add more network commands and netconsole support Henrik Nordström
2012-11-25 15:07 ` Luka Perkov
2012-11-25 11:44 ` [U-Boot] [PATCH 11/22] ARM: sunxi: U-Boot SPL capable of booting directly from MMC Henrik Nordström
2012-11-25 15:11 ` Luka Perkov
2012-11-25 11:44 ` [U-Boot] [PATCH 12/22] ARM sunxi: SPL support for Olimex A13-OLinuXino board Henrik Nordström
2012-11-25 15:17 ` Luka Perkov
2012-11-25 11:44 ` [U-Boot] [PATCH 13/22] ARM sunxi: SPL support for Mele A1000 board Henrik Nordström
2012-11-25 11:45 ` [U-Boot] [PATCH 14/22] ARM sunxi: SPL support for Cubieboard board Henrik Nordström
2012-11-25 11:45 ` [U-Boot] [PATCH 15/22] ARM sunxi: SPL support for Hackberry 1GB board Henrik Nordström
2012-11-25 11:45 ` [U-Boot] [PATCH 16/22] ARM sunxi: SPL support for a13_mid board Henrik Nordström
2012-11-25 11:45 ` [U-Boot] [PATCH 17/22] ARM sunxi: SPL support for Mini-X board Henrik Nordström
2012-11-25 11:46 ` [U-Boot] [PATCH 18/22] ARM sunxi: SPL support for hyundai A7HD board Henrik Nordström
2012-11-25 11:46 ` [U-Boot] [PATCH 19/22] ARM sunxi: SPL support for MK802 board Henrik Nordström
2012-11-25 11:46 ` [U-Boot] [PATCH 20/22] ARM sunxi: SPL support for Rikomagic MK802II board Henrik Nordström
2012-11-25 11:46 ` [U-Boot] [PATCH 21/22] ARM sunxi: SPL support for Mele A3700 board Henrik Nordström
2012-11-25 11:46 ` [U-Boot] [PATCH 22/22] ARM sunxi: SPL support for Olinuxino A13 Micro Henrik Nordström
2012-11-25 11:47 ` [U-Boot] [PATCH 04/22] ARM: sunxi: watchdog support Henrik Nordström
2013-02-02 23:55 ` Albert ARIBAUD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121125150540-9180@mutt-kz \
--to=luka@openwrt.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox