From: Wolfgang Denk <wd@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 01/22] ARM: sunxi: Basic Allwinner A10/A13 (sun4i/sun5i) support
Date: Sun, 25 Nov 2012 20:40:48 +0100 [thread overview]
Message-ID: <20121125194048.757CE20105B@gemini.denx.de> (raw)
In-Reply-To: <1353843450.17518.13.camel@home.hno.se>
Dear Henrik Nordstr?m,
In message <1353843450.17518.13.camel@home.hno.se> you wrote:
> This adds support for the Allwinner A10/A13 SoC's. Additionally
> board support for the dev-boards sun4i/sun5i is added.
...
> +/* Return PLL5 frequency in Hz
> + * Note: Assumes PLL5 reference is 24MHz clock
> + */
Incorrect multiline comment style. Please fix globally.
> diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h
> new file mode 100644
> index 0000000..513f618
...
> +#define CONFIG_MACH_TYPE 4104
NAK.
Please use value from mach-types.h ; if needed, ask for an update.
> diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h
> new file mode 100644
> index 0000000..dc84aba
...
> +#define CONFIG_MACH_TYPE 4138
Ditto.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"It may be that our role on this planet is not to worship God but to
create him." - Arthur C. Clarke
next prev parent reply other threads:[~2012-11-25 19:40 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1353842684.git.henrik@henriknordstrom.net>
2012-11-25 11:37 ` [U-Boot] [PATCH 01/22] ARM: sunxi: Basic Allwinner A10/A13 (sun4i/sun5i) support Henrik Nordström
2012-11-25 12:23 ` Luka Perkov
2012-11-25 13:08 ` Henrik Nordström
2012-11-25 19:55 ` Wolfgang Denk
2012-11-26 1:05 ` [U-Boot] [PATCH 01/22] Re: Copyright on board makefiles Henrik Nordström
2012-11-26 5:54 ` Wolfgang Denk
2012-11-25 19:52 ` [U-Boot] [PATCH 01/22] ARM: sunxi: Basic Allwinner A10/A13 (sun4i/sun5i) support Wolfgang Denk
2012-11-25 18:06 ` Marek Vasut
2012-11-26 0:21 ` Henrik Nordström
2012-11-26 0:33 ` Marek Vasut
2012-11-26 5:52 ` Wolfgang Denk
2012-11-25 19:33 ` Wolfgang Denk
2012-11-25 23:53 ` Henrik Nordström
2012-11-26 8:00 ` Stefan Roese
2012-11-25 19:40 ` Wolfgang Denk [this message]
2012-11-25 11:37 ` [U-Boot] [PATCH 02/22] ARM: sunxi: MMC driver Henrik Nordström
2012-11-25 14:33 ` Luka Perkov
2012-11-25 15:39 ` Henrik Nordström
2012-11-25 17:07 ` Luka Perkov
2012-11-25 19:58 ` Wolfgang Denk
2012-11-25 19:56 ` Wolfgang Denk
2012-11-25 18:09 ` Marek Vasut
2012-11-25 19:44 ` Wolfgang Denk
2012-11-25 11:38 ` [U-Boot] [PATCH 03/22] ARM sunxi: I2C driver Henrik Nordström
2012-11-25 14:41 ` Luka Perkov
2012-11-25 15:47 ` Henrik Nordström
2012-11-25 18:11 ` Marek Vasut
2012-11-25 19:47 ` Wolfgang Denk
2012-11-26 11:13 ` Heiko Schocher
2012-11-26 13:39 ` Henrik Nordström
2012-11-25 11:39 ` [U-Boot] [PATCH 05/22] power: Add AXP209 Power Management controller (I2C) Henrik Nordström
2012-11-25 14:44 ` Luka Perkov
2012-11-25 18:13 ` Marek Vasut
2012-11-25 19:48 ` Wolfgang Denk
2012-11-25 11:40 ` [U-Boot] [PATCH 06/22] ARM sunxi: Basic GPIO driver Henrik Nordström
2012-11-25 14:52 ` Luka Perkov
2012-11-25 18:14 ` Marek Vasut
2012-11-25 19:50 ` Wolfgang Denk
2012-11-25 21:47 ` Marek Vasut
2012-11-25 23:41 ` Henrik Nordström
2012-11-25 11:40 ` [U-Boot] [PATCH 07/22] tools: mksunixboot adding a Allwinner boot header Henrik Nordström
2012-11-25 15:01 ` Luka Perkov
2012-11-25 17:47 ` Wolfgang Denk
2012-11-25 11:41 ` [U-Boot] [PATCH 08/22] net: Add sunxi (Allwinner) wemac driver Henrik Nordström
2013-07-08 15:43 ` Joe Hershberger
2013-07-08 16:16 ` Tom Rini
2013-07-08 16:29 ` Joe Hershberger
2013-07-08 19:03 ` Tom Rini
2012-11-25 11:42 ` [U-Boot] [PATCH 09/22] ARM: sun4i: Enable ethernet support (wemac) on A10 boards Henrik Nordström
2012-11-25 15:05 ` Luka Perkov
2012-11-25 11:43 ` [U-Boot] [PATCH 10/22] sunxi: Add more network commands and netconsole support Henrik Nordström
2012-11-25 15:07 ` Luka Perkov
2012-11-25 11:44 ` [U-Boot] [PATCH 11/22] ARM: sunxi: U-Boot SPL capable of booting directly from MMC Henrik Nordström
2012-11-25 15:11 ` Luka Perkov
2012-11-25 11:44 ` [U-Boot] [PATCH 12/22] ARM sunxi: SPL support for Olimex A13-OLinuXino board Henrik Nordström
2012-11-25 15:17 ` Luka Perkov
2012-11-25 11:44 ` [U-Boot] [PATCH 13/22] ARM sunxi: SPL support for Mele A1000 board Henrik Nordström
2012-11-25 11:45 ` [U-Boot] [PATCH 14/22] ARM sunxi: SPL support for Cubieboard board Henrik Nordström
2012-11-25 11:45 ` [U-Boot] [PATCH 15/22] ARM sunxi: SPL support for Hackberry 1GB board Henrik Nordström
2012-11-25 11:45 ` [U-Boot] [PATCH 16/22] ARM sunxi: SPL support for a13_mid board Henrik Nordström
2012-11-25 11:45 ` [U-Boot] [PATCH 17/22] ARM sunxi: SPL support for Mini-X board Henrik Nordström
2012-11-25 11:46 ` [U-Boot] [PATCH 18/22] ARM sunxi: SPL support for hyundai A7HD board Henrik Nordström
2012-11-25 11:46 ` [U-Boot] [PATCH 19/22] ARM sunxi: SPL support for MK802 board Henrik Nordström
2012-11-25 11:46 ` [U-Boot] [PATCH 20/22] ARM sunxi: SPL support for Rikomagic MK802II board Henrik Nordström
2012-11-25 11:46 ` [U-Boot] [PATCH 21/22] ARM sunxi: SPL support for Mele A3700 board Henrik Nordström
2012-11-25 11:46 ` [U-Boot] [PATCH 22/22] ARM sunxi: SPL support for Olinuxino A13 Micro Henrik Nordström
2012-11-25 11:47 ` [U-Boot] [PATCH 04/22] ARM: sunxi: watchdog support Henrik Nordström
2013-02-02 23:55 ` Albert ARIBAUD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121125194048.757CE20105B@gemini.denx.de \
--to=wd@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox