[U-Boot] [PATCH V4 6/7] mmc: add bcm2835 driver

[Albert ARIBAUD <albert.u.boot@aribaud.net>]

Hi Stephen,

On Tue, 27 Nov 2012 09:32:27 -0700, Stephen Warren
<swarren@wwwdotorg.org> wrote:

> On 11/26/2012 11:49 PM, Albert ARIBAUD wrote:
> > On Mon, 26 Nov 2012 21:38:16 -0700, Stephen Warren
> > <swarren@wwwdotorg.org> wrote:
> > 
> >> This adds a simple driver for the BCM2835's SD controller.
> >>
> >> Workarounds are implemented for:
> >> * Register writes can't be too close to each-other in time, or they will
> >>   be lost.
> >> * Register accesses must all be 32-bit, so implement custom accessors.
> >>
> >> This code was extracted from:
> >> git://github.com/gonzoua/u-boot-pi.git master
> >> which was created by Oleksandr Tymoshenko.
> >>
> >> Portions of the code there were obviously based on the Linux kernel at:
> >> git://github.com/raspberrypi/linux.git rpi-3.6.y
> >> commit f5b930b "Main bcm2708 linux port" signed-off-by Dom Cobley.
> >>
> >> swarren changed the following for upstream:
> >> * Removed hack udelay()s in bcm2835_sdhci_raw_writel(); setting
> >>   SDHCI_QUIRK_WAIT_SEND_CMD appears to solve the issues.
> >> * Remove register logging from read*/write* functions.
> >> * Sort out confusion with min/max_freq values passed to add_sdhci().
> >> * Use more descriptive variable names and calculations in IO accessors.
> >> * Simplified and commented twoticks_delay calculation.
> >> * checkpatch fixes.
> >>
> >> Cc: Andy Fleming <afleming@gmail.com>
> > 
> > Hi Andy,
> > 
> > As soon as you give your Ack to this patch, I'll apply the
> > whole series to u-boot-arm/master.
> 
> Do feel free to apply all the patches before the MMC driver addition
> without waiting for the MMC driver though.

You're right. I'll apply 1 to 5 and wait for Andy's comment to be taken
into account for applying 6 and 7, possibly in a newer version.

Amicalement,
-- 
Albert.