From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Tue, 8 Jan 2013 09:50:27 +0100 Subject: [U-Boot] [PATCH v3 2/3] EXYNOS5: Add device node for USB. In-Reply-To: References: <1357225977-13346-1-git-send-email-gautam.vivek@samsung.com> <201301080806.33707.marex@denx.de> Message-ID: <201301080950.27949.marex@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Vivek Gautam, > Hi Marek, > > On Tue, Jan 8, 2013 at 12:36 PM, Marek Vasut wrote: > > Dear Vivek Gautam, > > > >> From: Rajeshwari Shinde > >> > >> This patch adds the device node required for USB > >> > >> Signed-off-by: Vivek Gautam > > > > Please rebase on u-boot-usb/next. > > "exynos5250.dtsi" seems to be missing in u-boot-usb tree. :-( > I can't find the exynos5250 side basic device tree support which is already > been applied on u-boot-samsung-mainline. Ok, let's change how to do this then. Apply all four on u-boot-samsung/next. > Set of five patches from Hatim Ali mentioned below, needs to be pulled for > exysno5250 side device tree support. > - EXYNOS5: FDT: add initial dts file for EXYNOS5250, SMDK5250 > - fdt: exynos5: Add DT node definition for SROM and SMSC9215 > - exynos5: Add DT based driver for SMC911X ethernet > - exynos5: config: Rename the smdk5250.h to exynos5250-dt.h > - SMDK5250: config: Add configuration file for SMDK5250 board > > Please suggest. Best regards, Marek Vasut